Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 50 for “"PWM Converters"”.

  1. Soft-switching techniques for high-power PWM converters

    … several soft-switching topologies for high power PWM converters. These new topologies achieve soft-switching functions with minimum increase of device voltage/current stresses and converter circulating energy, and thus have advantages over conventional techniques in efficiency, power density, …

    vt Repository record for Soft-switching techniques for high-power PWM converters (opens in a new tab)

  2. Modeling and control of three-phase PWM converters

    … models are developed for major three-phase PWM converters. The models are correct for the case when the voltage sources or capacitors with nonzero parasitic resistances are placed across the converter dc port or ac terminals. The effects of the parasitic resistances are described by …

    vt Repository record for Modeling and control of three-phase PWM converters (opens in a new tab)

  3. Fast dynamic transient solutions for three-phase PWM converters

    … the three-phase pulse-width-modulated (PWM) converter serves as the bridge that facilitates the seamless interaction between the grid, distributed re- sources, and loads. However, as power electronics systems increase in complexity, challenges emerge in terms of modeling, control design, …

    ubc Repository record for Fast dynamic transient solutions for three-phase PWM converters (opens in a new tab) Download PDF for Fast dynamic transient solutions for three-phase PWM converters (opens in a new tab)

  4. Voltage oriented control of three‐phase boost PWM converters

    In a plug‐in hybrid electric vehicle, the utility grid will charge the vehicle battery through the battery charger. For a three‐phase grid supply voltage, three‐phase boost rectifiers are a commonly used scheme for chargers. Bi‐directional power transfer capability and unit power factor operation …

    chalmers Repository record for Voltage oriented control of three‐phase boost PWM converters (opens in a new tab)

  5. Modeling and Control of Parallel Three-Phase PWM Converters

    … of parallel three-phase pulse-width modulated (PWM) converters. The converters include three-phase boost rectifiers, voltage source inverters, buck rectifiers and current source inverters. The averaging of the parallel converters is performed based on a generic functional switching unit, which …

    vt Repository record for Modeling and Control of Parallel Three-Phase PWM Converters (opens in a new tab)

  6. Average current-mode control and charge control for PWM converters

    Two control schemes for PWM converters, average current-mode (ACM) control and charge control, are studied in this dissertation. The small-signal models are derived for continuous-conduction mode PWM converters employing these two controls. Sampled-data modeling is applied to the current loop …

    vt Repository record for Average current-mode control and charge control for PWM converters (opens in a new tab)

  7. Active-clamp PWM converters: design-oriented analysis and small-signal characterization

    … an active clamp (ACL) circuit in high-frequency PWM converters with an electrical isolation. Existing design guidelines and design trade-offs for the ACL in forward and flyback converters are reviewed, and specific properties of both circuits that are caused by the ACL are highlighted. Based on …

    vt Repository record for Active-clamp PWM converters: design-oriented analysis and small-signal characterization (opens in a new tab)

  8. Modelling and Simulation of DFIG for wind energy applications using PWM converters

    … system consists of two back-to-back connected PWM converters through a dc link. In this scheme the stator of DFIG is connected to the grid directly, while rotor connected to the grid through two back-to-back converters and DC Link. A 2 MW DFIG system is modelled and simulated in the specialized …

    washington Repository record for Modelling and Simulation of DFIG for wind energy applications using PWM converters (opens in a new tab)

  9. A Unified Approach to Dynamic Modeling of High Switching Frequency PWM Converters

    … a unified approach for dynamic modeling of the PWM and soft-switching power converters. Dynamic modeling of non-linear power converters is very important for the design and stability of their closed loop control. While the use of equivalent circuits is often preferred due to simulation …

    ucf Repository record for A Unified Approach to Dynamic Modeling of High Switching Frequency PWM Converters (opens in a new tab)

  10. Application of High-Power Snubberless Semiconductor Switches in High-Frequency PWM Converters

    … to perform high frequency switching. Low-power converters, such as computer power supplies and low horsepower motor drives, have employed high-frequency switching for years and have benefited from very nice output waveforms, good control dynamic performance, and many other advantages compared to …

    vt Repository record for Application of High-Power Snubberless Semiconductor Switches in High-Frequency PWM Converters (opens in a new tab)

  11. Unified Large And Small Signal Discrete-space Modeling For Pwm Converters In Ccm

    … a Unified Discrete State-Space Model for power converters in CCM is presented. Two main approaches to arriving at the discrete model are used. The first approach involves an impulse function approximation of the duty cycle modulations of the converter switches , and this approach results in a …

    ucf Repository record for Unified Large And Small Signal Discrete-space Modeling For Pwm Converters In Ccm (opens in a new tab)

  12. Time Domain Core Loss Testing and Modelling of Power Magnetics in PWM Converters

    … and power density,<br/>yet their core loss under PWM excitation is still usually described by cycle-averaged models.<br/>However, conventional cycle-averaged models cannot resolve how core loss is distributed within<br/>individual PWM excitation cycles. This thesis therefore develops a …

    bristol Repository record for Time Domain Core Loss Testing and Modelling of Power Magnetics in PWM Converters (opens in a new tab) Download PDF for Time Domain Core Loss Testing and Modelling of Power Magnetics in PWM Converters (opens in a new tab)

  13. Zero-voltage switched resonant and PWM converters: design-oriented analysis and performance evaluation

    … is developed to optimize implementation of the converters in terms of efficiency. Efficiency optimization requires minimizing the circulating currents which are directly proportional to the reactive energy required by the resonant tank. The comparison of the different converters is based on the …

    vt Repository record for Zero-voltage switched resonant and PWM converters: design-oriented analysis and performance evaluation (opens in a new tab)

  14. Analysis and reduction of dc-link capacitor voltage/current stress in three-level PWM converters

    Power electronic converters are in the heart of modern renewable energy and motor drive systems. This Thesis focuses on the converter dc-link capacitor (bank), which is a costly component and a common source of failures. The Thesis is divided into two parts.<br/><br/>The first part examines the …

    soton Download PDF for Analysis and reduction of dc-link capacitor voltage/current stress in three-level PWM converters (opens in a new tab)

  15. Unified Large And Small Signal State-space Based Modeling And Symbolic Simulation For Pwm Converters

    … discrete modeling for control purposes of DC/DC converters and simulation through symbolic techniques. A Unified Discrete State-Space Model for power converters in CCM is presented. Two main approaches to arriving at the discrete model are used. The first approach involves an impulse function …

    ucf Repository record for Unified Large And Small Signal State-space Based Modeling And Symbolic Simulation For Pwm Converters (opens in a new tab)

  16. Nonlinear Analysis and Control of Standalone, Parallel DC-DC, and Parallel Multi-Phase PWM Converters

    … a stable design. Conventional analyses of power converters are based on averaged models, which ignore the fast-scale instability and analyze the stability on a reduced-order manifold. As such, validity of the averaged models varies with the switching frequency even for the same topological …

    vt Repository record for Nonlinear Analysis and Control of Standalone, Parallel DC-DC, and Parallel Multi-Phase PWM Converters (opens in a new tab)

Page 1 of 3