Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"PWM controller"”.
-
Design of an Integrated Silicon Carbide Nonlinear-carrier PWM Controller for Boost Converter Applications
… nonlinear-carrier (NLC) control is proposed as a controller topology that can work within the design challenges presented by SiC. A boost converter with an NLC controller is demonstrated in simulation with circuit blocks built entirely from SiC IC models.</p>
-
Modeling and Implementation of Controller for Switched Reluctance Motor With Ac Small Signal Model
… and closed-loop pulse-width-modulation (PWM) have been used for the switched reluctance motor (SRM) current controller. The Hysteresis controller induces large unpleasant audible noises because it needs to vary the switching frequency to maintain constant Hysteresis current band. In …
-
A Fast Response Dual Mode Buck Converter with Automatic Mode Transition
Dual mode DC-DC converters utilizing PWM and PFM modes of operation have been widely used to improve the efficiency over a wide range of the load current. Due to the highly varying nature of the load, it is beneficial to have the converter switch between the modes without an external mode select …
-
Development of a square wave voltage field-oriented controller for a linear vapor compressor.
… of a modest increase in conduction losses. The controller is based on a single-phase field-oriented control strategy, and to achieve the FOC control objectives, the fundamental and dc components of the applied square wave voltage are matched to the corresponding values requested by the current …
-
Control and Delay Compensation Techniques for High-Speed Operation In a Switched Reluctance Motor Drive
… operational challenges at high speeds, where controller and position feedback delays may hinder smooth operation and efficiency. These challenges might limit the adoption of SRM in high-performance applications. This thesis addresses high-speed SRM control issues, focusing on delay …
-
Design and Practical Implementation of Digital Auto-tuning and Fast-response Controllers for Low-power Switch-mode Power Supplies
In switched-mode power supplies (SMPS), a Controller is required for output voltage or current regulation. In low-power SMPS, processing power from a fraction of watt to several hundred watts, digital implementations of the controller, i.e. digital controllers have recently emerged as alternatives …
-
Design and Practical Implementation of Advanced Reconfigurable Digital Controllers for Low-power Multi-phase DC-DC Converters
… of this thesis is to develop practical digital controller architectures for multi-phase dc-dc converters utilized in low power (up to few hundred watts) and cost-sensitive applications. The proposed controllers are suitable for on-chip integration while being capable of providing advanced …
-
ACOUSTIC NOISE ANALYSIS, MEASUREMENT, AND CHARACTERIZATION IN ELECTRIC MOTOR DRIVES
… are employed for the experiments: a hysteresis controller with a variable switching frequency of up to 20 kHz, and a PWM controller with a switching frequency of 12.5 kHz. Various acoustic noise characteristics are calculated for different operating points, and the results for the two …
-
A LYAPUNOV BASED APPROACH TO ENERGY MAXIMIZATION IN RENEWABLE ENERGY TECHNOLOGIES
… conditions are time-varying. A backstepping PWM controller is developed to maximize the power of the solar generating system. The controller tracks a desired array voltage, designed online using an incremental conductance extremum-seeking algorithm, by varying the duty cycle of the switching …
-
The Design of an Asic Control Chip for a Forward Active Clamp Converter and the Investigation of Integratable Lateral Power Devices
In Part I, the design of an ASIC control chip for a forward active clamp converter is presented. Integration of the control and drive circuit into one IC chip results in higher power density, higher reliability for the converter module. The designed ASIC control chip uses a 2.0 um N well Analog …
-
Three Dimensional Passive Integrated Electronic Ballast for Low Wattage HID Lamps
… share the semiconductor switch, driver and PWM controller, so that the component count and cost can be reduced. The proposed SSPFC AC/DC front-end converter can achieve a high power factor, low THD, low bulk capacitor voltage, and the desired power regulation with a simple control circuit. …
-
Optimalizace regulačního algoritmu MR tlumiče
Tato práce se zabývá využitím magnetoreologického tlumiče v semiaktivním závěsu kola automobilu. Semiaktivní řízení závěsu může vylepšit jízdní komfort resp. bezpečnost jízdy na úroveň, která je s běžným pasivním nastavením nedosažitelná. Magnetoreologický tlumič má ale vlastnosti, které limitují …
-
Akumulátorový svařovací zdroj
Tato diplomová práce je zaměřená na návrh a následnou realizaci obloukové stejnosměrné svářečky. Tato práce vychází ze semestrální práce, kde byla realizovaná první verze. Svářečka je napájená z bateriového boxu obsahující LiFePO4 články. Články baterie jsou chráněny BMS obvody. Řídicí elektronika …