Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 129 for “"Parallel Flow"”.
-
Hydroeleastic Vibration of Rods in Parallel Flow
Made available in DSpace on 2014-12-09T19:52:28Z (GMT). No. of bitstreams: 1 7013372.pdf: 3193603 bytes, checksum: 650fe4c8cc4600cb91df0549f37b2b7e (MD5) Previous issue date: 1969
-
Kinematics and timing of orogen-parallel flow, Grouse Creek Mountains, Utah
… episode of mid-Cretaceous synconvergent orogen-parallel extension. The D 2 event is a previously undocumented deformational event in the Pennsylvanian-Permian Oquirrh Formation and overprints the earlier D1 fabric. D 2 is characterized by an axial planar cleavage, S2 , associated with …
-
Effect of vibration on heat transfer from wires in parallel flow
… and characteristics of three vibrated wires In a parallel flow. A simple experimental apparatus was constructed with which to pursue the investigation, and various results were obtained. Three wires of different diameters were individually tested in two configurations. One configuration consisted …
-
Performance analysis of parallel flow intersection and displaced left turn intersection designs
… left turn (DLT) (also known as the continuous flow intersection (CFI)) design has proven to be a superior alternative to the conventional intersection in terms of handling heavy volumes during peak periods. In locations where the availability of additional right of way and driveway access is …
-
Viscoelastic effects on parallel flow stability, transition to turbulence, and turbulent flow
… classical two dimensional theory of stability of parallel flow is extended to viscoelastic fluids. How the elasticity of the fluid affects the point of stability and determines the point of transition to turbulence is analyzed. In addition the magnification of disturbances is elucidated. This …
-
Linear stability of non-parallel flow in the entrance region of ducts
… made of the linear stability of the developing flow of an incompressible fluid in the entrance region of annular ducts, circular tubes, and parallel-plate channels. Small axisymmetric disturbances for annular duct and tube flows and small two-dimensional disturbances for channel flow are …
-
Modeling Mechanisms for Trench-Parallel Flow in the Cocos-Nazca Subduction System
The flow velocity of the asthenosphere beneath the center of oceanic plates is generally aligned with the overlying surface plate's motion. However, at subduction zones there can be significant variability between the asthenospheric flow fields and overlying plate trajectories. These …
-
Two phase flow distribution in parallel flow heat exchangers -- experimentally verified model
Maldistribution of refrigerant is a problem in parallel microchannel heat exchangers that lowers their potential effectiveness, especially when controlled by superheat. This paper describes modeling and numerical simulation of two phase mass flow distribution in a microchannel evaporator, on the …
-
3D trench-parallel flow in the subduction region and correlation with seismic anisotropy direction
… world. In subduction zone backarcs both trench-parallel and trench-normal seismic anisotropy, or fast wave polarization direction of shear wave, are observed. In the mantle the general assumption is that seismic anisotropy is caused by Lattice Preferred Orientation (LPO) of olivine minerals and …
-
The influence of heat transfer on the stability of parallel flow between concentric cylinders
Thesis (Ph. D.)--Michigan State University. Department of Mechanical Engineering, 1975
-
Boundary Layer on a Continuous Flat Plate in Parallel Flow with Similar and Non-Similar Boundary Conditions
… difference. Practical applications of this flow field are extrusion of porous plastic sheets, quenching of large perforated metallic sheets, and water condensing on aircraft during flight. Water condensation during flight is of interest in the problem of aircraft icing.
-
CFD Simulation of the Thermal Performance of a Parallel Counter-Parallel Flow Heat Exchanger for the Treatment of Hypothermia
… (CFD) in evaluating the thermal performance of a parallel/counter-parallel flow heat exchanger used as part of a fluid warmer to treat Hypothermia. The 3D model of the heat exchanger is divided into three regions; Infusate (fluid to be heated), Hot Water (heating fluid), and a Solid Region (wall). …
-
Heat transfer and pseudo-boiling of supercritical Carbon Dioxide in a parallel-flow microchannel and a micro-jets impingement device
… condition, along with pseudo-boiling, in a parallel-flow microchannel and a micro-jets impingement device were studied. An experimental setup, microfluidic devices with embedded resistance temperature detectors (RTDs), and a LabVIEW data acquisition system (DAQ), were used to obtain data for …
-
Simulation of Counterintuitive Pressure Drop in a Parallel Flow Design for a Specimen Basket for Use in the Advanced Test Reactor
… to contact specimens tested in the ATR. A parallel channel test cap section should reduce the pressure drop across this section compared to a single channel. A fluid experiment conducted by Idaho State University showed the pressure drop was actually greater. A Computation Fluid Dynamics …
-
A numerical study of barotropic instability of a zonally varying easterly jet.
… in several respects to that expected from the parallel flow theory of barotropic instability, however, the resultant structure of the waves causes a spatial growth rate greater than predicted by the local growth rates computed with a parallel flow model. In the stable region, the structure …
-
Stacked Microchannel Heat Sinks for Liquid Cooling of Microelectronics Devices
… than 0.1 K/W was demonstrated for both counter flow and parallel flow configurations. The effects of flow direction and interlayer flow rate ratio were investigated. It was found that for the low flow rate range the parallel flow arrangement results in a better overall thermal performance than …
-
Enhancing Thermal-Hydraulic Performance of Parallel and Counter Flow Mini-Channel Heat Sinks Utilizing Secondary Flow: A Numerical and Experimental Study
… two adjacent mini-channels, which segmented the flow domain into three zones. Secondary flow was generated through the inter-connectors utilizing the pressure difference of the adjacent channels resulting in hydraulic and thermal boundary layers disruption and hence enhanced thermal-hydraulic …
-
Free-surface flow in a shallow laterally heated cavity
This thesis is concerned with free surface flow in a non-rotating or rotating shallow laterally heated cavity which is assumed to be of infinite length in the third dimension. The flow is driven by a horizontal temperature difference: the two vertical walls are kept at constant, but different, …
-
Dynamic petrophysical properties of laminated rocks : an experimental investigation
… This thesis implements an experimental workflow to study and quantify the impact of laminations on dynamic petrophysical properties in the presence of two distinct types of layering: cross and parallel. Accordingly, relative permeability and capillary pressure are measured under two flow …
-
New Metrics on Image Articulation Manifolds Using Optical Flow
… transport operators for IAMs, with optical flow based transport being a prime candidate. In this thesis, we provide a detailed theoretical analysis of optical flow based transport on IAMs. In particular, we develop new analytical tools reminiscent of differential geometry to handle the …
Page 1 of 7