Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Parallel Strand Lumber"”.

  1. Truss Plate reinforced bolted connections in parallel strand lumber

    … of truss plate reinforced bolted connections in parallel strand lumber (PSL). Static tension tests were performed on single bolt connections and multiple bolt connections in 38x140 mm specimens, 89x140 mm specimens, and 133x191 mm specimens. All connections were designed according to CAN/CSA …

    ubc Repository record for Truss Plate reinforced bolted connections in parallel strand lumber (opens in a new tab) Download PDF for Truss Plate reinforced bolted connections in parallel strand lumber (opens in a new tab)

  2. Spring-pins as a timber connector in parallel strand lumber

    … bearing strength both perpendicular to grain and parallel to grain. Testing is conducted on multiple pin connections, and ultimately on moment connections to reflect the load demands predicted in the structural model. It was found that the spring-pin connection is stiff and strong enough to be …

    ubc Repository record for Spring-pins as a timber connector in parallel strand lumber (opens in a new tab) Download PDF for Spring-pins as a timber connector in parallel strand lumber (opens in a new tab)

  3. Comparison of creep/duration of load performance in bending of Parallam® parallel strand lumber to machine stress rated lumber

    … wood composite material called Parallam® parallel strand lumber (PSL) to two grades of machine-stress-rated (HSR) Douglas-fir lumber is presented in this thesis. Evaluation of the creep/DOL performance was made on nominal 2x4 members under constant bending stress at three stress levels. A …

    ubc Repository record for Comparison of creep/duration of load performance in bending of Parallam® parallel strand lumber to machine stress rated lumber (opens in a new tab) Download PDF for Comparison of creep/duration of load performance in bending of Parallam® parallel strand lumber to machine stress rated lumber (opens in a new tab)

  4. Moment resistant connections made with timber rivets in wood product substrates

    … herein are glue-laminated, laminated-strand, laminated-veneer and parallel-strand lumber. The model is based on the principle of equilibrium and assumes that the connection will behave in a ductile - no sudden wood failure - manner. The moments within a connection (a group of …

    ubc Repository record for Moment resistant connections made with timber rivets in wood product substrates (opens in a new tab) Download PDF for Moment resistant connections made with timber rivets in wood product substrates (opens in a new tab)

  5. Characterizing the Durability of PF and pMDI Adhesive Wood Composites Through Fracture Testing

    … test. The feasibility of using oriented strandboard (OSB), oriented strand lumber (OSL) and parallel strand lumber (PSL) for the DCB fracture method was assessed. The fracture resistance of PF was reduced significantly by the aging exposures. The fracture resistance of pMDI did not …

    vt Repository record for Characterizing the Durability of PF and pMDI Adhesive Wood Composites Through Fracture Testing (opens in a new tab)

  6. An Experimental Investigation of Structural Composite Lumber Loaded by a Dowel in Perpendicular to Grain Orientation at Yield and Capacity

    … Southern pine machine-stress-rated (MSR) lumber, laminated veneer lumber (LVL), and parallel strand lumber (PSL) were the three material types included in the program. Experimental results were compared with theoretical predictions from three models: the yield theory-based general dowel …

    vt Repository record for An Experimental Investigation of Structural Composite Lumber Loaded by a Dowel in Perpendicular to Grain Orientation at Yield and Capacity (opens in a new tab)

  7. Monotonic and cyclic behaviour of slender dowell-type fasteners in wood-steel-wood-connections

    … or two slotted-in steel plates in PARALLAM®, a Parallel Strand Lumber (PSL) product. The fastener types were a) plain shank steel dowel of 6.35 mm diameter (SH), b) plain shank steel dowel of 6.35 mm diameter with threads on both ends to allow for nuts and washers to be attached (SHT), and c) …

    ubc Repository record for Monotonic and cyclic behaviour of slender dowell-type fasteners in wood-steel-wood-connections (opens in a new tab) Download PDF for Monotonic and cyclic behaviour of slender dowell-type fasteners in wood-steel-wood-connections (opens in a new tab)

  8. Verification of an analytical hysteresis model for dowel-type timber connections using shake table tests

    … configurations. The specimens were made from parallel strand lumber (Parallam®), connected to the shake table by steel plates and tight-fitting mild steel dowels. A mass was placed on top of the column to simulate building loads. A Northridge(1994) and a Kobe(1995) earthquake record were used …

    ubc Repository record for Verification of an analytical hysteresis model for dowel-type timber connections using shake table tests (opens in a new tab) Download PDF for Verification of an analytical hysteresis model for dowel-type timber connections using shake table tests (opens in a new tab)

  9. Preliminary Evaluation of Kenaf as a Structural Material

    … was to design a kenaf product that resembled parallel strand lumber and required minimal processing of the kenaf. The mechanical properties of the two main components of kenaf, the bast fibers and the core, were evaluated using experimental techniques. To supplement components testing, nine …

    clemson Repository record for Preliminary Evaluation of Kenaf as a Structural Material (opens in a new tab)

  10. Edge connection technology for cross laminated timber (CLT) floor slabs promoting two-way action

    … is additionally stiffened through the use of parallel-strand lumber rim beams fixed to the edges of the CLT in the minor direction span and hidden within the cross-section of the CLT. ANSYS finite element modelling calibrated and validated from the experimental results show the potential of …

    ubc Repository record for Edge connection technology for cross laminated timber (CLT) floor slabs promoting two-way action (opens in a new tab) Download PDF for Edge connection technology for cross laminated timber (CLT) floor slabs promoting two-way action (opens in a new tab)

  11. Quality control and quality assurance in hybrid mass timber high-rise construction : a case study of the Brock Commons

    … timber panels, glued-laminated columns, and parallel strand lumber columns. With this, the building is currently the tallest wood building in the world and a testament to the suitability of engineered wood elements for high-rise construction. Aiming to address the lack of information …

    ubc Repository record for Quality control and quality assurance in hybrid mass timber high-rise construction : a case study of the Brock Commons (opens in a new tab) Download PDF for Quality control and quality assurance in hybrid mass timber high-rise construction : a case study of the Brock Commons (opens in a new tab)

  12. Reinforced multiple bolt timber connections

    … in glue-laminated timber (Glulam) and parallel strand lumber (PSL). Several reinforcing techniques were investigated; (i) threaded rods and glued-in rods were applied internally; (ii) truss plates, nailed plates and glued-on plates were used as a surface reinforcement. Different …

    ubc Repository record for Reinforced multiple bolt timber connections (opens in a new tab) Download PDF for Reinforced multiple bolt timber connections (opens in a new tab)

  13. Experimental study of a bolt-bushing connection system for structural composite lumber

    … in bolted connections of structural composite lumber. Monotonic tension tests and cyclic axial tests were performed on 80 specimens of varying dimensions made with Douglas Fir parallel strand lumber. All the connections were made with a single fastener, which consisted of a 12 mm bolt, with or …

    ubc Repository record for Experimental study of a bolt-bushing connection system for structural composite lumber (opens in a new tab) Download PDF for Experimental study of a bolt-bushing connection system for structural composite lumber (opens in a new tab)

  14. The seismic response of a timber frame with dowel type connections

    … direction. The beams and columns, composed of parallel strand lumber (Parallam®), were connected using steel plates and tightly fitting steel dowels. The behaviour of one typical connection was monitored in detail in addition to data pertaining to the overall response of the system. Prior to …

    ubc Repository record for The seismic response of a timber frame with dowel type connections (opens in a new tab) Download PDF for The seismic response of a timber frame with dowel type connections (opens in a new tab)