Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 47 for “"Parallel connection"”.

  1. The parallel connection of single phase DC to AC power converters

    … is to connect multiple converter modules in parallel. This approach has the advantages of increased reliability, due to the redundancy of the system, and flexibility, since modules can be added or removed as needed. The successful performance of a parallel-connected system depends on (i) the …

    concordia Download PDF for The parallel connection of single phase DC to AC power converters (opens in a new tab)

  2. Κυκλώματα και λογισμικό για μετατροπείς ΣΡ/ΣΡ με ημιαγωγούς καρβιδίου του πυριτίου για χρήση σε φωτοβολταϊκά συστήματα

    In this work, a thorough investigation on the parallel connection of the vertical trench (VT) silicon carbide (SiC) junction field effect transistors (JFETs) during forward and reverse conduction is performed. Both enhancement mode SiC JFETs, which conduct when there is no signal at the gate …

    greece Repository record for Κυκλώματα και λογισμικό για μετατροπείς ΣΡ/ΣΡ με ημιαγωγούς καρβιδίου του πυριτίου για χρήση σε φωτοβολταϊκά συστήματα (opens in a new tab)

  3. Spínač vysokých proudů pro mobilní robotiku

    … as a power switch. And it also deals with the parallel connection of the MOS-FET transistors to increase switching power output.

    brno-tech Repository record for Spínač vysokých proudů pro mobilní robotiku (opens in a new tab)

  4. A New Method for Designing FIR Digital Filters with Low Coefficient Sensitivity

    … is presented. The proposed prefilter is a parallel connection of the so-called "recursive running sum" and a very low order FIR filter and has an impressive passband performance. The equalilizer, a FIR filter, is designed via Chan's method for designing FIR filters. The method can be used …

    marquette Repository record for A New Method for Designing FIR Digital Filters with Low Coefficient Sensitivity (opens in a new tab)

  5. Analysis of performance of SiC bipolar semiconductor devices for grid-level converters

    … in single Si BJT which becomes worse when in parallel connection as it aggravates the current mismatch across the two devices, while this delay is almost non-existent in SiC devices. The current collapse seen in single SiC BJT is mitigated by parallel connection. These are dependant on …

    bristol Repository record for Analysis of performance of SiC bipolar semiconductor devices for grid-level converters (opens in a new tab) Download PDF for Analysis of performance of SiC bipolar semiconductor devices for grid-level converters (opens in a new tab)

  6. The Analysis and Synthesis of Spatial Compliance

    … space of spatial stiffnesses achieved with a parallel connection of "simple springs" ( conventional line springs and conventional torsional springs). The synthesis of a simple spring realizable stiffness matrix. An algorithm is developed based on the decomposition of the stiffness matrix into …

    marquette Repository record for The Analysis and Synthesis of Spatial Compliance (opens in a new tab)

  7. Beta invariant and variations of chain theorems for matroids

    … formula for the beta invariant of generalized parallel connection of two matroids. Tutte's Wheel-and-Whirl theorem and Seymour's Splitter theorem give respectively a constructive and structural view of the 3-connected matroids. Geelen and Whittle proved a chain theorem for sequentially …

    mississippi Repository record for Beta invariant and variations of chain theorems for matroids (opens in a new tab)

  8. Multi-cell battery modeling

    … Also, these battery models don’t consider cell connection and cell-to-cell variation. In this research, we will focus on addressing the fundamental problem by developing an accurate battery model based on electrical circuit analysis to consider cell connection, cell-to-cell variation, and all …

    nebraska Repository record for Multi-cell battery modeling (opens in a new tab)

  9. A FREQUENCY AND DURATION APPROACH FOR GENERATING CAPACITY RELIABILITY EVALUATION

    … to all of these values. In this thesis, parallel connection, series connection, margin convolution and generation and line complements are presented as operations. A symbolic language is created to provide a notational representation of the system configuration. This thesis formulates …

    sask Repository record for A FREQUENCY AND DURATION APPROACH FOR GENERATING CAPACITY RELIABILITY EVALUATION (opens in a new tab)

  10. Analysis and synthesis of Lithuanian phoneme dynamic sound models /

    … (MISO) system. The MISO system is a parallel connection of single-input and single-output (SISO) systems whose input impulse amplitudes vary in time. Within this framework two synthesis methods are proposed: harmonic and formant. Simulation has revealed that that the proposed …

    vilnius Repository record for Analysis and synthesis of Lithuanian phoneme dynamic sound models / (opens in a new tab)

  11. Lietuviškų fonemų dinaminių modelių analizė ir sintezė /

    … (MISO) system. The MISO system is a parallel connection of single-input and single-output (SISO) systems whose input impulse amplitudes vary in time. Within this framework two synthesis methods are proposed: harmonic and formant. Simulation has revealed that that the proposed …

    vilnius Repository record for Lietuviškų fonemų dinaminių modelių analizė ir sintezė / (opens in a new tab)

  12. Series operation of thyristors in HVDC converters

    … low ratings of thyristors necessitate series and parallel connection of thyristors in order to construct a valve of sufficient rating for hvdc operation. The design of thyristor valve should ensure even distribution of voltage and current among all thyristors of the valve, during all operating …

    salford

  13. A MICROPROCESSOR BASED POWER SYSTEM STABILIZER

    … or for maximum data transfer, through a parallel connection. The serial communications will allow remote access to the stabilizer functions. Also demonstrated is the conversion of continuous stabilizer transfer function terms to their discrete versions. The discrete design of a digital …

    sask Repository record for A MICROPROCESSOR BASED POWER SYSTEM STABILIZER (opens in a new tab)

  14. An Electromechanical Automatic Voltage Regulator for a Network Computer

    … obtained from an AC source through the inverse-parallel connection of trinistors which makes bi-directional rotation of the motor possible. The motor, being coupled through a reducing gear to the variac on the analyzer, will drive the variac in a proper direction so as to maintain a constant …

    sdstate Repository record for An Electromechanical Automatic Voltage Regulator for a Network Computer (opens in a new tab)

  15. Modeling and control of modular multilevel DC-DC switched-capacitor power converter

    … current spikes may occur in the MMC3 due to the parallel connection of SM capacitors with imbalanced voltages, which lead to additional power losses and reliability issues. Furthermore, to expand the achievable output voltage range of the MMC3 and enhance its reliability based on its modular …

    gatech Repository record for Modeling and control of modular multilevel DC-DC switched-capacitor power converter (opens in a new tab)

  16. Topology development and analysis for multiple input DC/DC converter

    … obtain higher availability in a power system. A parallel connection of converters has been used to integrate more than one energy source in a power system. However, a multiple-input converter (MIC) can generally have the following advantages compare to a combination of several individual …

    texas Repository record for Topology development and analysis for multiple input DC/DC converter (opens in a new tab)

  17. Electrical power generation from standing shock waves

    … are mounted side by side in the flow a parallel connection of their outputs produced a small increase in current. However no increase in output voltage was observed when the generators were connected in series. It was also found that when an oblique shock and its reflection from the wall …

    ubc Repository record for Electrical power generation from standing shock waves (opens in a new tab) Download PDF for Electrical power generation from standing shock waves (opens in a new tab)

  18. Modeling and Tuning of Energy Harvesting Device Using Piezoelectric Cantilever Array

    … array, which integrates multiple cantilevers in parallel connection, was investigated.;In the past, most prior research has focused on the theoretical analysis of power generation instead of storing generated power in a physical device. In this research, a commercial solid-state battery was used …

    wvu Repository record for Modeling and Tuning of Energy Harvesting Device Using Piezoelectric Cantilever Array (opens in a new tab)

  19. Comparison of Hybrid Asymmetric and Conventional Multilevel Inverters for Medium Voltage Applications

    … ratings in high power applications, series and parallel connection of switches is often considered an effective solution. In addition, stepped waveform in the output of inverter has better harmonic spectrum than 2-level waveform in low switching frequencies. So, in recent years multilevel …

    chalmers Repository record for Comparison of Hybrid Asymmetric and Conventional Multilevel Inverters for Medium Voltage Applications (opens in a new tab)

Page 1 of 3