Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Partial miscibility"”.

  1. Evaluation of Diffusion of Liquid Solvents in Bitumen and Heavy Oil Using the X-Ray Tomography Technique

    … never published in previous literature, was the partial miscibility when mixing n-propane and bitumen, and another results to highlight are the oil swelling, oil shrinkage, asphaltene precipitation and settling, fully miscibility, and the effect of adding pure asphaltenes and calcium carbonate to …

    calgary Repository record for Evaluation of Diffusion of Liquid Solvents in Bitumen and Heavy Oil Using the X-Ray Tomography Technique (opens in a new tab)

  2. Characterisation of Poly (ethylene naphthalate)-based polymer blends

    … including several additives do not improve the miscibility of the constituent polymers and show lower tensile strength than those of homopolymers. However, PBT/PEN blends reveal improved tensile strengths of the blends between the ROM and MROM predictions lines with more than 50 % volume …

    auckland-ms Repository record for Characterisation of Poly (ethylene naphthalate)-based polymer blends (opens in a new tab)

  3. Structure and property relationships in PET blends

    … range while the blends with added catalyst show partial miscibility. The mechanical properties are slightly improved in the latter blends. Studies were made on the crystallization and melting behaviour of PET and both of blends. It has been found that the crystallisation was inhibited in the …

    birmingham Download PDF for Structure and property relationships in PET blends (opens in a new tab)

  4. An investigation of the effects of shearfree deformation and the role of miscibility on the structure and properties of in situ thermoplastic composites

    Injection Molding The effects of partial miscibility on the mechanical properties and morphology of thermotropic liquid crystalline polymer blends were investigated in this part of the work. Blends of an immiscible (Vectra A900) and partially miscible (HX1000) thermotropic liquid crystalline …

    vt Repository record for An investigation of the effects of shearfree deformation and the role of miscibility on the structure and properties of in situ thermoplastic composites (opens in a new tab)

  5. Simulations of Partially Miscible Two-Component Two-Phase Flow at the Pore-Scale Using Discontinuous Galerkin Methods

    … for the two-component two-phase flow with partial miscibility at the pore scale. Many studies in the rock-fluid interaction have been done for immiscible flow, whose components do not mix and separate instantaneously. This paper extends the study to miscible flow, whose components will mix …

    rice Repository record for Simulations of Partially Miscible Two-Component Two-Phase Flow at the Pore-Scale Using Discontinuous Galerkin Methods (opens in a new tab)

  6. Crystallization kinetics of polylactide and its blends

    … incompatible, possessed a certain degree of partial miscibility. The crystallization kinetics were investigated on the pure PLA-L and the blends. Two separate studies were conducted, the first on the kinetics of the overall crystallization by means of an Avrami analysis, the second on the …

    vt Repository record for Crystallization kinetics of polylactide and its blends (opens in a new tab)

  7. The Effect of Some Electrolytes on the Critical Solution Temperature Of the Phenol-Water System

    … example of a system of liquids exhibiting partial miscibility is the phenol-water system. One of the earliest binary systems of this type to be Investigated, it has been the subject of much research and experimentation during the past sixty years. Its critical solution temperature has been …

    marquette Repository record for The Effect of Some Electrolytes on the Critical Solution Temperature Of the Phenol-Water System (opens in a new tab)

  8. EXPLORING THE EFFECTS OF BLENDING POLY L-(LACTIDE) AND BACTERIAL POLY(3-HYDROXYBUTYRATE-CO-3-HYDROXYDECANOATE) ON YOUNG’S MODULUS AND SURFACE WETTABILITY OF BIOPOLYMER FILMS

    … IR microscopy, and DSC analysis indicated that partial miscibility was achieved in the 75/25 blend, whilst films with greater than 50 wt% PHBD content exhibited crystalline phase separation. Our results highlight the thermal and mechanical complexities of the PLLA/PHBD polymer blends and can …

    cornell Repository record for EXPLORING THE EFFECTS OF BLENDING POLY L-(LACTIDE) AND BACTERIAL POLY(3-HYDROXYBUTYRATE-CO-3-HYDROXYDECANOATE) ON YOUNG’S MODULUS AND SURFACE WETTABILITY OF BIOPOLYMER FILMS (opens in a new tab)

  9. An experimental evaluation of the miscibility characteristics of ten different non-CFC refrigerants with fourteen different lubricants

    <p>Miscibility data are needed to determine the suitability of refrigerant/lubricant combinations for use in a refrigeration system. Refrigeration systems require a miscible refrigerant/lubricant mixture for proper compressor lubrication, for proper lubricant return to the compressor, and for …

    iastate Repository record for An experimental evaluation of the miscibility characteristics of ten different non-CFC refrigerants with fourteen different lubricants (opens in a new tab)

  10. Silicon-Based Hybrid Organic-Inorganic Polymers and Coatings

    … and shorter block length gave rise to larger partial miscibility. By incorporating the PDMS blocks to dissipate energy, the PC-PDMS block copolymers had much better impact strength than pure PC oligomers. Thermoset polycarbonate-polyhedral oligomeric silsesquioxane (PC-POSS) coatings were …

    ndsu Repository record for Silicon-Based Hybrid Organic-Inorganic Polymers and Coatings (opens in a new tab)

  11. Simulation and interpretation of formation-tester measurements acquired in the presence of mud-filtrate invasion, multiphase flow, and deviated wellbores

    … Because the latter measurements are affected by partial miscibility between oil-base mud and in-situ oil, Equation-of-State (EOS) simulations are used to account for variations of fluid viscosity, fluid compressibility, fluid density, and GOR during the processes of invasion and fluid pumpout. …

    texas Repository record for Simulation and interpretation of formation-tester measurements acquired in the presence of mud-filtrate invasion, multiphase flow, and deviated wellbores (opens in a new tab)

  12. Investigation and analysis of lubricant effects on the performance of an HFC-134a refrigeration system

    <p>The effects of lubricant miscibility and viscosity were evaluated by measuring the performance of an HFC-134a refrigeration system. The focus of this study is different from past studies which have been based on investigating system reliability in that is based on evaluating system efficiency, …

    iastate Repository record for Investigation and analysis of lubricant effects on the performance of an HFC-134a refrigeration system (opens in a new tab)

  13. Fabrication And Characterization of Polymer Blends Containing Plant Oil-Derived Copolymers

    … depicted phase-separated morphology and were partially miscible. However, improvement in toughness and ductility was not achieved, and when compared to mechanical models, the experimental moduli fell below the lower-bound moduli predicted by the Takayanagi model. To improve the interfacial …

    clemson Repository record for Fabrication And Characterization of Polymer Blends Containing Plant Oil-Derived Copolymers (opens in a new tab)

  14. Μελέτη της ομοιογένειας και της κρυστάλλωσης σε νέα δυαδικά μίγματα πολυεστέρων του 2,5-φουρανοδικαρβοξυλικού οξέος

    … crystals.In the second part of this thesis, the miscibility of binary blends of PBF with other, mainly furanic or terephthalate, polyesters was studied. First, a theoretical study of miscibility was conducted by calculating the solubility parameters, δ, through the Hoftyzer – van Krevelen group …

    greece Repository record for Μελέτη της ομοιογένειας και της κρυστάλλωσης σε νέα δυαδικά μίγματα πολυεστέρων του 2,5-φουρανοδικαρβοξυλικού οξέος (opens in a new tab)

  15. Study of the phase behavior of poly(n-alkyl methacrylate-b-methyl methacrylate) diblock copolymers and its influence on the wettability of polymer surfaces

    … out the existence of two mixed phases, and hence partial miscibility between the both blocks was assumed. The SAXS patterns reflected for most diblock copolymers lamellae morphologies even in the case of very asymmetric composition, for instance with volume fraction of PPMA, 0.86 It was assumed …

    qucosa-diss

  16. Phase-Field Modelling of Partially Miscible Systems: Nanobubbles, Fluid Ganglia, and Viscous Fingering

    … extensively, the nonequilibrium dynamics of partially miscible systems remain less understood, particularly when at least one component has extremely low solubility in the opposite phase. Strongly unequal partitioning complicates their description, while low solubility may be taken to imply …

    mcmaster Repository record for Phase-Field Modelling of Partially Miscible Systems: Nanobubbles, Fluid Ganglia, and Viscous Fingering (opens in a new tab)

  17. Επεξεργασία και αξιοποίηση μηχανολογικών πολυμερών από απορρίμματα ηλεκτρικού και ηλεκτρονικού εξοπλισμού

    … The ABS/PC blends are characterized by partial miscibility, which permits the fairly uniform dispersion of PC particles in the ABS-rich blends, while chains with low molecular weight of one polymer emigrate in the phase of the other polymer. This emigration restricts the friction between …

    greece Repository record for Επεξεργασία και αξιοποίηση μηχανολογικών πολυμερών από απορρίμματα ηλεκτρικού και ηλεκτρονικού εξοπλισμού (opens in a new tab)