Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"Particle Beds"”.

  1. Effects of Ultrasonic Transducers on Heat Transfer in Packed Particle Beds

    … transducers on heat transfer in a packed particle bed heat exchanger. Although substantial research has been devoted to ultrasound, and the associated improvements in heat transfer, data regarding the effects on packed particle beds is non-existent. This is of particular interest given the …

    ut-knoxville Repository record for Effects of Ultrasonic Transducers on Heat Transfer in Packed Particle Beds (opens in a new tab)

  2. PERFORMANCE ANALYSIS AND THE EFFECTS OF KEY PARAMETERS IN SOLID PARTICLE BEDS

    Fluid-solid particle beds have a broad range of industrial applications as packed and fluidized beds. The particle-particle collision, particle-wall interaction, and virtual mass force which initiates from particle motion influencing neighboring particles make it very difficult to analyze the …

    houston Repository record for PERFORMANCE ANALYSIS AND THE EFFECTS OF KEY PARAMETERS IN SOLID PARTICLE BEDS (opens in a new tab)

  3. Numerical and Experimental Study of Anisotropic Effective Thermal Conductivity of Particle Beds under Uniaxial Compression

    … effective thermal conductivity. However, ETC of particle beds is known to be an anisotropic property under low compressive pressures. The objective of this study was to first determine the effect of compressive loads, gas pressures, and particle Young's modulus on the ETC of particle beds with …

    utahstate Repository record for Numerical and Experimental Study of Anisotropic Effective Thermal Conductivity of Particle Beds under Uniaxial Compression (opens in a new tab)

  4. Bed dynamics and heat transfer in shallow vibrated particulate beds

    A vibrated bed is a mobile layer of solid particles contained in a vessel that is vibrated vertically. This study investigates bed dynamics and heat transfer from a vertical surface in shallow vibrated beds in absence of aeration. In general, "shallow" means a depth-to-width ratio less than one. In …

    vt Repository record for Bed dynamics and heat transfer in shallow vibrated particulate beds (opens in a new tab)

  5. Spectral radiative properties and radiation heat transfer of bauxite and SiO2 particles for solar thermal applications

    The use of bauxite- and silica-based ceramic particles as solar thermal energy storage materials in concentrated solar power (CSP) plants enables dispatchable grid-scale electricity generation. The solar-to-thermal conversion efficiency is sensitive to both the radiative properties of the particles …

    gatech Repository record for Spectral radiative properties and radiation heat transfer of bauxite and SiO2 particles for solar thermal applications (opens in a new tab)

  6. Estimation of thermal properties of randomly packed bed of silicagel particles using IHTP method

    … values of thermophysical transport properties of particle beds are necessary to accurately model heat and mass transfer processes in particle beds that under-go preferred processes and changes. The objective of this study is to use a proven analytical/numerical methodology to estimate the unknown …

    sask Repository record for Estimation of thermal properties of randomly packed bed of silicagel particles using IHTP method (opens in a new tab)

  7. Effects of extended surfaces in narrow channel fluidized bed heat exchangers

    … steam cycles. On the other hand, oxide particles provide a TES media that can store energy at very high temperatures adequate for driving those cycles, but primary particle heat exchangers for coupling TES to those power cycles require expensive alloys that can be costly due to poor …

    colo-mines Repository record for Effects of extended surfaces in narrow channel fluidized bed heat exchangers (opens in a new tab)

  8. The Breakage of Needle-Shaped Crystals Under Pressure Filtration

    … shown pressure filtration to be a major cause of particle breakage, which has consequences for product quality, bioavailability and downstream operations like formulation. A new method for the investigation of the effect of hydrodynamic stress on static crystals has been developed by continuously …

    whiterose Download PDF for The Breakage of Needle-Shaped Crystals Under Pressure Filtration (opens in a new tab)

  9. Solids segregation in gas-fluidized beds of large particles

    … nature of solids segregation in gas-fluidized beds of relatively large particles. Large particles were selected because they are becoming increasingly important in industrial fluidized beds but have not been very thoroughly investigated.</p> <p>Segregation experiments were conducted with binary …

    utk-theses Repository record for Solids segregation in gas-fluidized beds of large particles (opens in a new tab)

  10. Aplicação de modelos de quebra de partículas do ambiente de simulação do método dos elementos discretos no estudo de microprocessos de cominuição

    … microprocesses were studied using three particle breakage models within the DEM simulation environment: The Bonded Particle Model – BPM, the Fast Breakage Model - FBM, and the Particle Replacement Model – PRM. Such models were calibrated on the basis of the median fracture energy of …

    brazil-uerj Repository record for Aplicação de modelos de quebra de partículas do ambiente de simulação do método dos elementos discretos no estudo de microprocessos de cominuição (opens in a new tab)

  11. Validation and application of breakage model in the discrete element method through the simulation of comminution systems

    … commercial DEM platform Rocky DEM, adopting a particle replacement scheme to represent particle fragmentation. The model describes fundamental properties of ore particles, such as the distribution of fracture energy among a population of particles, the size effect on breakage probability, the …

    brazil-uerj Repository record for Validation and application of breakage model in the discrete element method through the simulation of comminution systems (opens in a new tab)

  12. Pneumatic Particulate Collection System for an Unmanned Ground Sampling Robot

    … investigated experimentally: jet impingement and particle entrainment (i.e. steep attack angle and parallel flow). Turbulent, free jet characteristics and critical velocities of particles are studied. Ultimately, a final design is presented that effectively collects particulate material from the …

    vt Repository record for Pneumatic Particulate Collection System for an Unmanned Ground Sampling Robot (opens in a new tab)

  13. Bed Packing Models: Influence on Bed Geometry & Hydrodynamics

    … The configurations developed while packing the beds play an important role in the operation of reactor as they effect the hydrodynamics of the operation by altering the fluid flow behavior. Also, extremely dense beds are known to produce high pressure drops because of the highly tortuous paths. …

    tamu Repository record for Bed Packing Models: Influence on Bed Geometry & Hydrodynamics (opens in a new tab)

  14. The use of surfactants to aid and improve the leaching of low grade copper ores

    … equation. Ore was finely ground and packed into particle beds. Leach liquid with surfactant was introduced to these beds. The rate of permeating fluid flow was monitored against time. The affinity of the liquid for the solid surface dictated the rate of uptake. Washburn’s equation allowed for the …

    ubc Repository record for The use of surfactants to aid and improve the leaching of low grade copper ores (opens in a new tab) Download PDF for The use of surfactants to aid and improve the leaching of low grade copper ores (opens in a new tab)

  15. Integrating fluidized bed heat exchangers and particle thermal energy storage with sCO₂ recompression Brayton cycles for concentrating solar power

    Oxide particles provide a cost-effective solution for thermal energy storage (TES) in future concentrating solar power (CSP) plants that implement supercritical carbon dioxide (sCO2) cycles at firing temperatures above 700°C. However, the design of effective particle-sCO2 HXs (HX) remains a …

    colo-mines Repository record for Integrating fluidized bed heat exchangers and particle thermal energy storage with sCO₂ recompression Brayton cycles for concentrating solar power (opens in a new tab)

  16. Modelling of fluid flow through packed beds and application in water treatment processes

    Filtration is a process for the removal of solid particles from a suspension (a two-phase system containing particles in a fluid) by the passage of the suspension through a porous medium, yet comprehensive analysis of the microscale fluid dynamics during the process is still incomplete. In this …

    unsw Repository record for Modelling of fluid flow through packed beds and application in water treatment processes (opens in a new tab)

  17. Anisotropic Compressive Pressure-Dependent Effective Thermal Conductivity of Granular Beds

    … with increasing compressive pressure on granular beds and horizontal stress in a granular bed under gravity is related to the vertical stress through Jaky's at-rest earth pressure coefficient. No research has been performed previously on determining the anisotropic effective thermal conductivity …

    utahstate Repository record for Anisotropic Compressive Pressure-Dependent Effective Thermal Conductivity of Granular Beds (opens in a new tab)

  18. Characterization of caking and cake strength in a potash bed

    … which the initial moisture content, drying time, particle size and chemical composition (i.e. magnesium content) of the samples were varied. For particle sizes in the range from 0.85 to 3.35 mm, experimental data show that the cake strength increased linearly with initial moisture content for each …

    sask Repository record for Characterization of caking and cake strength in a potash bed (opens in a new tab)

  19. Thermo-fluid aspects of miniature Stirling cryocoolers for small satellites

    … cryocoolers utilize stacked screens or sphere particle beds, which are made of readily available materials with favorable properties, such as stainless steel for operation above 35 K, and rare earth metals for lower temperatures. These traditional approaches offer low figures of merit (FOM) at …

    gatech Repository record for Thermo-fluid aspects of miniature Stirling cryocoolers for small satellites (opens in a new tab)

  20. Monte-Carlo Simulation of Diffusion as an Aid to Interpreting Quasi-elastic Neutron Scattering from Lattice Gas Systems with Diffusion on Multiple Time-Scales

    … using an alloy of palladium and silver (PdAg) in particle beds an example of which can be seen in the exhaust processing system in the tritium recovery plant of ITER (Glugla et al., 2006b) in which tritiated waste products are passed through palladium-sliver permiators in multiple stages lowering …

    salford Download PDF for Monte-Carlo Simulation of Diffusion as an Aid to Interpreting Quasi-elastic Neutron Scattering from Lattice Gas Systems with Diffusion on Multiple Time-Scales (opens in a new tab)

Page 1 of 2