Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 68 for “"Particle Breakage"”.
-
Modelling of particle breakage in tumbling ball mills
… that large grinding ball (25mm) is preferred for particle being broken. However, the physical batch grinding test is time consuming. For numerical simulation, this work investigates the grinding process in tumbling ball mills using a discrete element method (DEM) based model. Binary particles are …
-
Critical state, dilatancy and particle breakage of mine waste rock
Critical state, dilatancy and particle breakage characteristics of two mine waste rock (MWR) materials were systematically studied in drained isotropic and axisymmetric compression. A specimen preparation technique that simulated material dumping in the field was adopted and the technique is shown …
-
Experimental and numerical investigations of particle breakage in grinding processes
… still poorly understood because of complicated breakage behaviour of particles in the process. The lack of understanding of particle breakage has prevented the development of the fundamental understandings of the grinding process. This work investigated the breakage behaviours of particles under …
-
Particle breakage in sand blasting due to impact on ductile materials
… blasting is one of them, where a stream of sand particles is forcefully projected onto a surface, with compressed air or steam. These sand particles break up into very small pieces upon impact, which are inhaled by workers to cause silicosis. While much research has been done on the surface being …
-
DEM modelling of particle breakage and its application to ball milling
… capable of providing micro-scale information of particle interactions. Direct DEM modelling of particle breakage using particle replacement method is a recent development of this field, but still immature. This project aimed to integrate the particle breakage into an in-house developed DEM model …
-
Development of a particle breakage model for implementation in the discrete element method
Particle breakage in the Discrete Element Method (DEM) is indispensable in the simulation of various unit operations, which is the case of crushing. Thus, the present work aims to develop a particle breakage model in DEM, based on the particle replacement model. In order to properly describe …
-
Discrete element method modelling of particle breakage and wear in High Pressure Grinding Rolls
… response of the rolls. The micro-phenomena of particles, such as breakage behaviour and strength weakening were investigated and calibrated by implementing a particle breakage model. This model was employed to simulate the particle breakage occurring during the grinding process, analysing the …
-
The Effect of Physicochemical Properties of Wastewater Flocs on UV Disinfection Following Hydrodynamic Particle Breakage
This study showed that hydrodynamic particle breakage had potential as a method to help improve the disinfection of wastewater effluents. The physicochemical properties of flocs from four distinct effluents sources (combined sewer overflow, settled combined sewer overflow, primary effluent, and …
-
Effect of Particle Breakage on Ballast Permanent Deformation — A Study Using the Discrete Element Method
… large (often as large as 63 mm) angular particles that mainly function to dissipate train-induced stresses from crossties to the underlying subgrade soils and to provide rapid drainage for surface water. Moreover, the ballast layer is also critical towards ensuring a smooth riding track …
-
A tomographic exploration of the internal structure of coal and its role in single particle breakage
… to a rapid increase in temperature. A number of particle and material properties influence the degradation characteristics of coal including the initial particle size, the composition of the particle, and weathering; the degradation characteristics can also be influenced by the properties of the …
-
A PBM framework based on DEM modelling and particle breakage kinetics to investigate continuous grinding in ball mills
… than 20% of the total energy contributing to particle breakage. Therefore, developing a reliable grinding model is important for optimisation and scale-up of mills for improved efficiency and reduced operating costs. In this study, a framework based on population balance model (PBM) was …
-
Effect of Dust Dispersion and Morphology on Dust Deflagration Hazard
… parameters. These standards assume the dust particle size distribution remains unaltered post-dispersion in these apparatus. Recent studies have shown that dispersion in the standard 20 L apparatus, widely used for dust explosion properties measurement, leads to significant particle breakage. …
-
The geotechnical behaviour of ballast materials for railway track maintenance
… well-compacted ballast and reduces the amount of particle breakage normally associated with maintenance. By 1999 a fleet of stoneblowers was fully operational across the UK rail network and achieving target rates of track maintenance. However in some cases the track quality appears to have been …
-
Predicting Breakage of Needle-shaped Large Aspect Ratio Particles Using Discrete Element Method (DEM)
Particle attrition is inevitable during processing of granular material and has been reported to cause manufacturing inefficiencies, unpredictable product quality, dust hazards, flow problems, etc. Of particular interest to this study is attrition of large aspect ratio needle-shaped active …
-
Monotonic Behaviour of Pond Ash
… reconstitution of sand and sand with fine. The particle size distribution of the pond ash was analysed by a laser particle analyser before and after triaxial testing to investigate particle breakage. Also, the tested pond ash was reused for triaxial testing, aiming to investigate the influence …
-
The Effects of Suppression of Dilation on the Shear Strength of Sands
… of sands as normal stresses increase results in particle breakage, which contributes to this reduction in peak strength. There is still disagreement regarding how suppression of dilation and particle breakage affects sands critical state angle of friction (_cs^'). A total of 178 direct shear …
-
Sonocrystallization and sonofragmentation
… slurries of ionic or molecular crystals, crystal breakage occurred not by interparticle collision but by direct interactions between crystals and shockwaves. Sonofragmentation rates depended strongly on the strength of the crystal material, as described by its Vickers hardness or Young’s modulus. …
-
Towards comprehensive interpretation of the state parameter from cone penetration testing in cohesionless soils
… of the soil. A hypothesis was put forward on the particle breakage process at the particle level and its implications for the behaviour of sands at higher stress levels were discussed. A series of triaxial tests were performed, focusing on the effects of particle breakage on the location of the …
-
Efeito da granulometria e da litologia no comportamento de lastros ferroviários em laboratório e por análise computacional
The particle size distribution (PSD) and lithology of the ballast layer has huge influence on its behavior when subjected to the load generated by trains, being a key factor in the lifespan of the railway pavement. However, most of the specifications related to lithology and granulometric …
-
Monotonic loading behavior of calcareous sands with increasing particle crushing
… been focused on the loading behavior and the particle breakage subjected to loading. It has been reported that in offshore construction, the measured capacities in calcareous were approximately 20% lower than predicted capacities. Therefore, it is necessary to investigate the loading behavior …
Page 1 of 4