Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Particle Cracking"”.

  1. Particle cracking damage evolution in 7075 wrought aluminum alloy under monotonic and cyclic loading conditions

    … usually contains brittle coarse constituent particles or inclusions of Fe-rich intermetallic compounds and Mg2Si, typically in the size range of 1 to 50 micron. Plastic deformation and fracture of 7xxx series alloys (as well as of numerous other wrought Al-alloys) is associated with gradual …

    gatech Repository record for Particle cracking damage evolution in 7075 wrought aluminum alloy under monotonic and cyclic loading conditions (opens in a new tab)

  2. The role of particle cracking in dilatation during tensile straining of a cast and thermomechanically processed 6061 Al - 20 volume percent Al2O3 metal matrix composite

    … (MMC) containing 20 volume percent of Al2O3 particles was examined. Standard tensile samples of the MMC and unreinforced 6061 Al were machined. Precise diameter measurements were made of both composite and unreinforced samples prior to and immediately following tensile straining. Tension …

    nps Repository record for The role of particle cracking in dilatation during tensile straining of a cast and thermomechanically processed 6061 Al - 20 volume percent Al2O3 metal matrix composite (opens in a new tab)

  3. Deformation and fracture behavior of eutectic aluminum-silicon casting alloys

    The effect of silicon particle size and morphology on the deformation and fracture behavior of a binary aluminum silicon casting alloy was studied. Castings of eutectic composition were solidified either slowly without modifiers, or quickly with strontium modification to produce two different …

    ubc Repository record for Deformation and fracture behavior of eutectic aluminum-silicon casting alloys (opens in a new tab) Download PDF for Deformation and fracture behavior of eutectic aluminum-silicon casting alloys (opens in a new tab)

  4. Modeling of crack initiation and growth in solid rocket propellants using macromechanics and micromechanics theories

    … the solid rocket propellant can be construed as particle reinforced composites. The macromechanics approach entailed a numerical simulation of a finite element model to predict the crack behavior based on the damage initiation, growth, and local saturation. Its results were then compared to the …

    nps Repository record for Modeling of crack initiation and growth in solid rocket propellants using macromechanics and micromechanics theories (opens in a new tab)

  5. High temperature deformation and failure in aluminum-alumina particulate metal matrix composites

    … with investigating the role of the reinforcing particles on plastic flow and fracture of metal matrix composites (MMCs) in the high temperature, moderately high strain rate domain. Uniaxial tensile, uniaxial compressive, and collar compressive tests were conducted on as-cast and extruded MMCs …

    ubc Repository record for High temperature deformation and failure in aluminum-alumina particulate metal matrix composites (opens in a new tab) Download PDF for High temperature deformation and failure in aluminum-alumina particulate metal matrix composites (opens in a new tab)

  6. Mechanism of subcritical crack growth in the alumina reinforced aluminum-copper composite: Effects of interface and matrix microstructure

    … indicated that failure mechanisms changed from particle cracking in UA composite to a near-interface fracture in PA and interface failure in OA composites. The fracture toughness in the composite was found to be proportional to shear strength of the $\rm Al\sb2O\sb3/Al$-Cu interface. Fatigue …

    uiuc Repository record for Mechanism of subcritical crack growth in the alumina reinforced aluminum-copper composite: Effects of interface and matrix microstructure (opens in a new tab)

  7. On The Yield and Fracture of Cast A205

    … contain a 17-19% local volume fraction of TiB2 particles and Cu-rich particles, the latter of which do not completely dissolve after a solutionizing treatment. Furthermore, the hardness response after ageing is reduced in these regions. The added TiB2 does not appear to contribute meaningfully …

    queens Repository record for On The Yield and Fracture of Cast A205 (opens in a new tab)

  8. Prediction of material fracture toughness as function of microstructure

    … can promote interface debonding and discourage particle cracking induced catastrophic failure. Based on the CFEM results, a semi-empirical model is developed to establish a quantitative relation between the propagation toughness and statistical measures of microstructure, fracture mechanisms, …

    gatech Repository record for Prediction of material fracture toughness as function of microstructure (opens in a new tab)

  9. GRAPHENE COATING ON NMC CATHODE & WATER BASED NMC CATHODES

    … interface and structural instability due to particle cracking and irreversible phase transformations. These in turn lead to reduced cell performance over time. Hence there is a need to improve the stability, long-term performance, capacity, and conductivity of the NMC cathode. Graphene, with …

    cornell Repository record for GRAPHENE COATING ON NMC CATHODE & WATER BASED NMC CATHODES (opens in a new tab)

  10. Deliniating interfacial and bulk phenomena influencing reversibility of high-voltage phase transitions in layered-oxide cathodes

    … off gassing, increased surface reactivity, and particle cracking. While avoiding these phase transitions to improve cyclability is a viable strategy, their avoidance leaves a significant amount of capacity untapped. This presents an inevitable tradeoff between cyclability and single-cycle …

    texas Repository record for Deliniating interfacial and bulk phenomena influencing reversibility of high-voltage phase transitions in layered-oxide cathodes (opens in a new tab)

  11. LARGE DEFORMATION BEHAVIOR OF CAST A356 ALUMINUM ALLOY UNDER UNIAXIAL TENSION, COMPRESSION AND V-BENDING

    … refine the morphology of the eutectic Si phase particles. The two variants were then used to study the effect of size and shape distributions of Si eutectic phase particles within the material on the deformation behavior under uniaxial tension, compression and V-bending conditions. The alloy …

    mcmaster Repository record for LARGE DEFORMATION BEHAVIOR OF CAST A356 ALUMINUM ALLOY UNDER UNIAXIAL TENSION, COMPRESSION AND V-BENDING (opens in a new tab)

  12. Recycling the anode from electric vehicle lithium ion batteries for a circular economy

    … steps to create spherical, pitch coated particles for the anode. Academic research on graphite recovery mainly focuses on the extraction of graphite for use in alternative applications despite it being the active anode material in the vast majority of lithium-ion batteries. This is …

    birmingham Download PDF for Recycling the anode from electric vehicle lithium ion batteries for a circular economy (opens in a new tab)

  13. Development of Electrodes and Coatings for Sodium Ion Energy Storage

    … and thus stability was predominated by particle cracking, surface exfoliation, and fractured connectivity. Here, the coatings substantially improved the cycle retention by maintaining the overall integrity of the electrode. After 500 cycles, the pristine electrode decayed entirely, …

    waterloo Repository record for Development of Electrodes and Coatings for Sodium Ion Energy Storage (opens in a new tab)

  14. Investigation of the influence of mechanical pressure on the aging and the expansion of silicon-containing lithium-ion batteries

    … the repetitive volume changes lead to particle cracking, contact loss, and delamination from the current collector foil. Besides several approaches on material level, i.e. new binders, modification of the active material, and the utilization of tailored electrolytes, developments on …

    bayreuth Repository record for Investigation of the influence of mechanical pressure on the aging and the expansion of silicon-containing lithium-ion batteries (opens in a new tab)