Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Particle Ingestion"”.

  1. Effects of Sand Ingestion on the Cooling of Turbine Blade Outer Air Seals

    … turbine engines operate in environments where particle ingestion, especially sand ingestion, can affect the cooling of various turbine parts. The most critical areas are in the combustor and the first stage components of the turbine. Gas temperatures in these areas are the highest compared to …

    vt Repository record for Effects of Sand Ingestion on the Cooling of Turbine Blade Outer Air Seals (opens in a new tab)

  2. Application of a Non-intrusive Optical Non-spherical Particle Sizing Sensor at Turboshaft Engine Inlet

    The aviation industry struggles with particle ingestion as it is highly corrosive and damaging. More importantly, though, the issue of engine particle ingestion has more questions than answers. There is a large industry need to understand the effect that particle ingestion has on turbine engines as …

    vt Repository record for Application of a Non-intrusive Optical Non-spherical Particle Sizing Sensor at Turboshaft Engine Inlet (opens in a new tab)

  3. Predicting Motion of Engine-Ingested Particles Using Deep Neural Networks

    … to facilitate the design of gas turbine engine particle separators by reducing the computational expense to accurately simulate the fluid flow and particle motion inside the separator. It has been well-documented that particle ingestion yields many detrimental impacts for gas turbine engines. …

    vt Repository record for Predicting Motion of Engine-Ingested Particles Using Deep Neural Networks (opens in a new tab)

  4. An image processing technique for erosion analysis on compressor blade geometry

    Particle ingestion into aircraft engines is a major concern due to its physical- and performance-related implications; largely due to compressor blade material erosion. Current methods for monitoring this erosion (such as visual tools) lack adequate reliability and consistency, while only providing …

    vt Repository record for An image processing technique for erosion analysis on compressor blade geometry (opens in a new tab)

  5. Experimental Investigation of Initial Onset of Sand Deposition in the Turbine Section of Gas Turbines

    Particle ingestion and deposition is an issue of concern for gas turbine engines operating in harsh environments. The ingested particles accelerate the deterioration of engine components and thus reduce its service life. This effect is observed to a greater extent in aircrafts/helicopters operating …

    vt Repository record for Experimental Investigation of Initial Onset of Sand Deposition in the Turbine Section of Gas Turbines (opens in a new tab)

  6. Factors Governing the Phagocytosis of Carbon in the Perfused Rat Liver

    … capacity, the physicochemical basis of particle ingestion by these cells has received little attention. The significant role played by surface forces in the ingestive phenomenon has been shown and the energy dependence of the process demonstrated in polymorphonuclear leucocytes, …

    marquette Repository record for Factors Governing the Phagocytosis of Carbon in the Perfused Rat Liver (opens in a new tab)

  7. High resolution scattering measurements for stationary particles

    Particle characterization is important to the aerospace field because particle ingestion in propulsion engines can lead to catastrophic failures. It has been shown laser based methodologies can determine size and concentration of spherical particles by using light extinction. However, when one …

    vt Repository record for High resolution scattering measurements for stationary particles (opens in a new tab)

  8. Quantification of Multistage Particle Fragmentation in a Gas Turbine Axial Compressor

    Particle ingestion in gas turbine engines leads to erosion, fouling, and deposition, with the severity of damage being dependent on particle characteristics. As particles progress through the axial compressor, they undergo breakage, which results in a terminal size, at which particles cannot break …

    vt Repository record for Quantification of Multistage Particle Fragmentation in a Gas Turbine Axial Compressor (opens in a new tab)

  9. Optical Field Instrumentation for Characterizing Particle Sampling Sensors

    Particle ingestion in gas turbine applications can be detrimental to performance and pose significant safety concerns. Areas of high sand concentration are hazardous to aircraft, requiring precautions like routine inspections and maintenance. The engine failure modes are dependent on particle …

    vt Repository record for Optical Field Instrumentation for Characterizing Particle Sampling Sensors (opens in a new tab)

  10. Development of a Novel Probe for Engine Ingestion Sampling in Parallel With Initial Developments of a High-speed Particle-laden Jet

    Particle ingestion remains an important concern for turbine engines, specifically those in aircraft. Sand and related particles tend to become suspended in air, posing an omnipresent health threat to engine components. This issue is most prevalent during operation in sandy environments at low …

    vt Repository record for Development of a Novel Probe for Engine Ingestion Sampling in Parallel With Initial Developments of a High-speed Particle-laden Jet (opens in a new tab)

  11. Development of Diagnostic Tools for Use in a Gas Turbine Engine Undergoing Solid Particulate Ingestion

    … operations as significant amounts of groundlevel particles can be entrained in the surrounding air and subsequently ingested into the engine. Prolonged exposure to particle ingestion events leads to premature engine wear and, in extreme cases, rapid engine failure. Expanding our current …

    vt Repository record for Development of Diagnostic Tools for Use in a Gas Turbine Engine Undergoing Solid Particulate Ingestion (opens in a new tab)

  12. Experimental Investigations of the Onset of Sand Deposits on Hastelloy-X between 1000 C and 1100 C

    In many arid regions, particle ingestion can occur within propulsive gas turbines. The ingested particles can severely impact performance and may damage many primary gas path components through erosion or deposition. Characterizing crystalline deposits on metallic substrates can allow for the …

    vt Repository record for Experimental Investigations of the Onset of Sand Deposits on Hastelloy-X between 1000 C and 1100 C (opens in a new tab)

  13. Evaluation of a Particle Sampling Probe to Measure Mass Concentration in Particle-Laden Flows

    Particle ingestion is a prevalent issue for jet engines. During operation, sand and ash particles enter the engine and can cause serious problems, including erosion and buildup of Calcia-Magnesia-Alumina-Silicate (CMAS) deposits. Analyzing the particle mass concentration of the airflow can help …

    vt Repository record for Evaluation of a Particle Sampling Probe to Measure Mass Concentration in Particle-Laden Flows (opens in a new tab)

  14. Predictive Simulations of Erosion in Metals and Graphite Induced by High-Velocity Particle Impact

    Particles in a solid rocket exhaust plume can cause significant erosion damage to impinged surfaces, such as rocket nozzles and launch pad structures. To design more robust systems, computational methodologies utilizing both finite element methods (FEM) and smoothed particle hydrodynamics (SPH) …

    jhu Repository record for Predictive Simulations of Erosion in Metals and Graphite Induced by High-Velocity Particle Impact (opens in a new tab)

  15. Particle Sensing in Gas Turbine Inlets Using Optical Measurements and Machine Learning

    … studies have investigated the effects of particle ingestion on the component level, an accurate in-situ measurement technique is needed for a systematic understanding of the effects and real-time engine health monitoring. Optical measurement techniques are attractive for this application …

    vt Repository record for Particle Sensing in Gas Turbine Inlets Using Optical Measurements and Machine Learning (opens in a new tab)

  16. A Diagnostic Technique for Particle Characterization Using Laser Light Extinction

    … environments have increased risks of micro-sized particle ingestion into engines. The probability of increased sand and dust ingestion results in increased life cycle costs, in addition to increased potential for performance loss. Thus, abilities to accurately characterize inlet sand would be …

    vt Repository record for A Diagnostic Technique for Particle Characterization Using Laser Light Extinction (opens in a new tab)

  17. Experimental Investigation of Temperature Effects on Microparticle Sand Rebound Characteristics at Gas Turbine Representative Conditions

    When a gas turbine operates in a particle laden environment, such as a desert, small solid particles are ingested into the engine. The ingested sand particles can cause damage to engine components and reduce the service life of the engine. Particle ingestion causes the erosion of metal blades and …

    vt Repository record for Experimental Investigation of Temperature Effects on Microparticle Sand Rebound Characteristics at Gas Turbine Representative Conditions (opens in a new tab)

  18. Sediment: stress factor or food source for reef corals

    … in different sediment regimes, I quantified ingestion and assimilation of ¹⁴4C-labelled SPM for four common species of scleractinian coral on the Great Barrier Reef (GBR) over a wide range of SPM concentrations (1-30 mg dry weight [dw]/L ). Ingestion rates of three species (Pocillopora …

    jamescook Download PDF for Sediment: stress factor or food source for reef corals (opens in a new tab)