Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 100 for “"Particle removal"”.
-
Fundamentals of micro-particle removal by liquid oxide
… form complex solid aluminum titanate type micro-particles (inclusions). During the flow of titanium alloyed steel grades containing solid inclusions (such as aluminum titanate and alumina type inclusions), the clog accompanied by steel skull can be formed at the submerged entry nozzle between the …
-
Particle Removal and Disinfection Byproducts at the Fort Thompson Microfiltration Plant
… water industry is highly concerned with the removal of pathogens to prevent the outbreak of disease. The United States Environmental Protection Agency (USEPA) currently requires 4-log removal of viruses and 3-log removal of Giardia, and will likely require 2-log removal of Cryptosporidium in …
-
Nano-Particle Removal from Surface of Materials Used in EUV Mask Fabrication
… The main challenge addressed in this study is particle removal from EUV mask surfaces (CrON1, CrON2, and fused silica) and thermal oxide (SiO₂). Effective pre-clean procedures were developed for each surface. As chemical cleaning methods fail to meet SEMATECH criteria, addition of megasonic …
-
Separation and quantification of the particle removal mechanisms in the ionizing wet scrubber
… was to separate and quantify the electrostatic particle removal mechanisms in the Ionizing Wet Scrubber (IWS). The total particle removal in the IWS due to electrostatic forces, is effected by electrostatic precipitation in the Electrostatic Precipitator (ESP) section and image force attraction …
-
Cryptosporidium and Particle Removal from Low Turbidity Water by Engineered Ceramic Media Filtration
… performance was assessed using turbidity and particle count reductions, Cryptosporidium oocyst and oocyst-sized microsphere removal, head loss and stability of operation. Experiments were designed to allow related facets of current filtration research to be examined. These included: effect of …
-
PARTICLE REMOVAL IN FLOC BLANKET CLARIFIERS VIA INTERNAL FLOW THROUGH POROUS FRACTAL AGGREGATES
… water treatment train. The mechanism of primary particle removal in floc blanket clarifiers was characterized via size-based performance curves obtained from light blocking particle counters that measured the effluent of a laboratory-scale floc blanket clarifier treating synthetic raw water. …
-
Influence of Swirl and Turbulence in the Particle Removal Using Fog in a Pipe Flow
… an airflow. The underlying principle of this removal process involves enlarging the aerosol particles by coagulating them with fog drops, which are subsequently eliminated through inertial impaction onto the tube wall. Previous research conducted by Tabor et al. (2021) demonstrated an increase …
-
Particle Removal and Feature Damage Reduction Using Carbonated Ammonia Solutions for Enhanced Megasonic Cleaning Processes
… steps is a major cause of yield loss. The removal of particles is typically achieved through liquid chemical formulations aided by a sound field in the MHz frequency range. When liquid is irradiated with megasonic waves, dissolved gases play an important role in particle removal and feature …
-
Filter Media Modification In Rapid Sand Filtration
… modification of the filter medium, an initial particle removal of 96% was achieved by all coagulants versus 60% removal in the absence of pretreatment. Pretreatment with PACl and alum showed increasing particle removal with increasing dosage up to a maximum of 550 mmol Al/m2 after which filter …
-
Physical and conceptual modeling of sedimentation characteristics in stormwater detention basins
… The conceptual model was developed to estimate particle removal efficiency of the rectangular detention basin for the treatment of stormwater runoff by extending ideal horizontal flow reactor theory under the condition in which water level is varied. The physical model was built in 1/5 scale of …
-
Investigate Woodsmoke and Interventions in an Exposure Chamber: A Tent Project
… air-purifying respirators (PAPRs), for their particle removal efficiency and effectiveness in a laboratory setting. Objectives: This research was dedicated to designing and engineering an exposure system that can be generalized, repeated, adjustable, and easily accessed by future controlled …
-
OPTIMIZATION OF DISSOLVED AIR FLOTATION FOR DRINKING WATER TREATMENT THROUGH CFD MODELING
… (DAF) process is known for its efficiency in the removal of low-density particles from water. The performance of the system depends, in part, on the hydrodynamics of the flow. Whereas experimental flow measurement methods for DAF can be very challenging due to the presence of bubbles and …
-
The effect of water temperature and reactor geometry on turbulent flocculation
… work was performed during this study: (1) Two particle/floc measuring techniques were evaluated; The HIAC particle counter, and fully automated image analysis. (2) An investigation of the effect of reactor geometry, mixing intensity, and pH on flocculation efficiency in a batch reactor at high …
-
Bench-scale evaluation of an energy efficient acoustic aerosol purification device with a newly designed bioaerosol testing and evaluation chamber
… air (HEPA) filters capable of removing 99.97% of particles larger than 0.3 μm in diameter. These filters have high associated energy costs due to pressure drop and can become contaminated with potentially hazardous material during normal operation. Hence, it is important to test alternative low …
-
Physicochemical aspects of particle breakthrough in granular media filtration
… filtration is used almost universally to remove particles from drinking water, and is usually the last particle removal process in water treatment plants. Therefore, superb particle removal efficiency is needed during this process to ensure a high quality of drinking water. However, particle …
-
Characterization of particle collection efficiency in a packed bed
… scrubbers have been traditionally used for acid removal and very little work has been done to. characterize their particle removal capabilities. The primary objective of this study was to characterize and quantify the use of packed bed scrubbers as a method of particulate control. Two-inch type R …
-
In-situ Measurement of Ventilation and Impacts of Filtration on IEQ and Energy use of Residential Buildings
… change rate (ACR). ACR is not only an important particle removal mechanism, and a source of variations in filter IEQ performance, but it also is an important contributor to energy use in buildings. This work first critically reviews the existing literature on filtration and then presents an …
-
Megasonic Cleaning of Wafers in Electrolyte Solutions: Possible Role of Electro-acoustic and Cavitation Effects
… work has been done to increase understanding of particle removal mechanisms in megasonic cleaning using different solution chemistries with varying ionic strengths. However, to date, the focus of all these studies of particle removal has been either cavitation or acoustic streaming.The …
-
Prediction of bioparticles dispersion and distribution in a hospital isolation room
Removal of bioparticles from hospital isolation room is important in reducing the transmission risk of infectious diseases. An effective ventilation system is necessary to protect the patient, doctor and nurses from catching infectious diseases. The goal of this study was to select the most …
Page 1 of 5