Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 122 for “"Particulate Filter"”.
-
Modeling of diesel particulate filter (DPF)
… an exhaust system must be developed. The diesel particulate filter (DPF) is the part responsible in the exhaust system for purifying most of the soot particles harmful to humans and the environment. This project aims to study the effect of pressure drop on soot loading, where the pressure drop …
-
Numerical Studies for Gasoline Particulate Filter Performance Improvement
… is accompanied by a significant increase in Particulate Matter (PM) and Particulate Number (PN) emissions as compared to (multi)Port Fuel Injected (PFI) engines. GDI-specific particulate filters (GPFs) with high filtration efficiency and low backpressure are required to meet the stringent …
-
CFD and Experimental Analysis of Diesel Particulate Filter
The diesel particulate filter (DPF) is a device designed to remove diesel particulate matter or soot from the exhaust gas of a diesel engine. The DPF is often used in combination with other exhaust after treatment devises, such as DOC (diesel oxidation catalyst) or SCR (selective catalyst …
-
Investigation of techniques and effects of diesel particulate filter cleaning
… of exhaust aftertreatment devices such as diesel particulate filters has become a more attractive means to meet those standards. During the use of these filters some of the particulate captured, usually ash, begins to restrict the flow through the filter. This increases the backpressure in the …
-
Simulation of Diesel Particulate Filter regeneration using Lattice Boltzmann method
… the current work, LBM has been applied to Diesel Particulate filters which is a device used for reducing Particulate Matter emissions from diesel engines. Diesel Particulate Filtering (DPF) technologies as they are collectively known, have a two-step mechanism to them. First is the trapping of the …
-
Characteristics of particles downstream of a partially failed diesel particulate filter.
A diesel particulate filter (DPF) can be used to reduce the particulate matter (PM) emissions from a vehicle. However, when these devices fail the tailpipe emissions can change. The main goal of this project was to determine if a soot sensor provided by Honeywell could detect a failed filter, …
-
Modeling of diesel particulate filter filtration and regeneration for transient driving schedules
… However, diesel engines emit large amounts of particulate matter (PM) which can imperil human health. The best way to reduce the particulate matter is by using the Diesel Particulate Filter (DPF) system which consists of a wall-flow monolith which can trap particulates, and the DPF can be …
-
Soot Mass Estimation from Electrical Capacitance Tomography Imaging for a Diesel Particulate Filter
… images of the cross section of a diesel particulate filter (DPF). However, a soot mass estimation algorithm is still needed to translate the ECT image pixel data to obtain soot load in the DPF. In this research, we propose an estimation method to quantify the soot load in a DPF through an …
-
Passive regeneration: long-term effects on ash characteristics and diesel particulate filter performance
Diesel particulate filters (DPF) have seen widespread growth as an effective means for meeting increasingly rigorous particle emissions regulations. There is growing interest to exploit passive regeneration of DPFs to reduce fuel consumption accompanying traditional active regeneration. …
-
On the estimation of diesel particulate filter particulate load based on pressure difference
Stricter particulate emission regulations have led to the use of Diesel Particulate Filters (DPF), which is one of the exhaust aftertreatment systems utilized to capture engine-out particulates. However, as particulates accumulate within the DPF, the exhaust pressure drop increases which in turn …
-
Modeling and simulation of wall -flow diesel particulate filter during loading and regeneration
… promising after-treatment device in reducing particulate emission from diesel engines, the diesel particulate filter (DPF) was developed in the 1980s and has undergone notable improvements. The objective of this dissertation is to explore complicated physical processes in the DPF during …
-
Modeling and Analysis of Particulate Matter Deposition and Regeneration in a Diesel Particulate Filter
… and low “greenhouse gas” emission. The particulate matter (PM) emitted by a diesel engine is collected and then burned in a diesel particulate filter (DPF). Analysis and modeling works have been done in this research to provide insight on optimization of the DPF design and operating …
-
Study of the effect of biodiesel fuel on passive oxidation in a catalyzed particulate filter
… hp) and 317 kW (425 hp) was used to load the filter to 2.2 g/L and passively oxidize particulate matter (PM) within an aftertreatment system consisting of a diesel oxidation catalyst (DOC) and catalyzed particulate filter (CPF). The tests conducted with the engine rated at 365 hp used a 2007 …
-
Waste Heat Recovery From a Compression Ignition Engine using a Combined Diesel Particulate Filter Heat Exchanger
… the work of validating a combined diesel particulate filter heat exchanger (DPFHX) for CI engine exhaust waste heat recovery (WHR) in a Rankine Cycle (RC), a concept introduced in the first chapter of this thesis. The second chapter includes a comprehensive literature review, indicating …
-
Combined Diesel Particulate Filter/Heat Exchanger for Engine Exhaust Waste Heat Recovery with Organic Rankine Cycle
Diesel Particulate Filters (DPFs) are currently being used to remove Particulate Matter (PM) from compression ignition engine exhaust streams with collection efficiencies approaching 100%. These devices capture soot by forcing the exhaust gases through porous walls, where entrapment of the …
-
Combined Diesel Particulate Filter/Heat Exchanger for Engine Exhaust Waste Heat Recovery with Organic Rankine Cycle
Diesel Particulate Filters (DPFs) are currently being used to remove Particulate Matter (PM) from compression ignition engine exhaust streams with collection efficiencies approaching 100%. These devices capture soot by forcing the exhaust gases through porous walls, where entrapment of the …
-
Study of the flow field through the wall of a Diesel particulate filter using Lattice Boltzmann Methods
… of urea. The particle matter is eliminated using filters. This thesis is focused in this matter. Most of the strategies to reduce the emission of contaminants penalise fuel consumption. The particle filter is not an exception. Its installation, located in the exhaust duct, restricts the pass of …
-
Development of a Novel Sensor for Soot Deposition Measurement in a Diesel Particulate Filter Using Electrical Capacitance Tomography
This paper presents a novel approach of particulate material (soot) measurement in a Diesel particulate filter using Electrical Capacitance Tomography. Modern Diesel Engines are equipped with Diesel Particulate Filters (DPF), as well as on-board technologies to evaluate the status of DPF because …
-
Radio Frequency Studies of Soot Loading and Ammonia Storage on a Diesel Particulate Filter with a SCR Catalyst Coating
The radio frequency (RF) measurement technique has been shown to be a viable method for measurement of the amount of soot loaded onto DPF’s [1] and the amount of NH3 stored on SCR catalysts [2]. In one of the configurations, a microwave resonant cavity is formed by the metal can encasing the …
-
IMPACT OF ENGINE CALIBRATION ON PM OXIDATION IN A CATALYZED PARTICULATE FILTER OVER A TRANSIENT CYCLE: A MODELLING STUDY
The combustion strategy in a diesel engine has an impact on the emissions, fuel consumption and the exhaust temperatures. The PM mass retained in the CPF is a function of NO2 and PM concentrations in addition to the exhaust temperatures and the flow rates. Thus the engine combustion strategy …
Page 1 of 7