Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"Particulate composite"”.
-
Constitutive analysis and extrusion modeling of 6061 alloy and particulate composite
… analysis of the alloy and three metal matrix composites previously tested (10%Al 2 O 3 /6061, 15%SiC/6061, and 20%Al 2 O 3 /6061). The flow stresses decrease with increasing deformation temperature and the rate at which this occurs increases with percent reinforcement. Flow stress as a …
-
Parametric modeling of bolted joints between components made of particulate composite materials
Particulate metal matrix composites (MMC) exhibit higher stiffness, strength and wear resistance compared to metal alloys. They exhibit superior compressive and buckling strength because of their higher plastic modulus. MMC's can operate at very higher temperatures than fiber-reinforced polymer …
-
A study of near tip phenomena for cracks in a particulate composite
An experimental investigation using grids with a frequency of 125 lines/in. (5 lines/mm) was performed on inert propellant and pure binder at two different global head rates of 0.1 in./min (2.5 mm/min) and 1.0 in./min (25.4 mm/min). From the extracted data, displacements, strains, and dominant …
-
Particulate composite material internal deformation measurements using x-ray microtomography and digital volume correlation
Typical particulate composites used in engineering applications consist of complex microstructures with a range of particulate sizes and often high particulate volume fractions (65%-95%). Examples of these are, explosives and rocket propellants for defense and aerospace applications, asphalt …
-
Two- and Three-Dimensional Microstructural Modeling of Asphalt Particulate Composite Materials using a Unified Viscoelastic-Viscoplastic-Viscodamage Constitutive Model
… for microstructural modeling of asphalt composite materials using a coupled thermo-viscoelastic, thermo-viscoplastic, and thermo-viscodamage constitutive model. In addition, the dissertation presents methods that can be used to capture and represent the two-dimensional (2D) and …
-
Improvement of the dielectric breakdown strength and leakage currents of nano-sized CFO PZT particulate composite thin film with high particle loadings by controlled percolation for magnetoelectric applications.
Magnetic and electric properties of a nano-sized particulate composite thin film consisting of non-percolating 11 nm superparamagnetic CoF e2O4 (CFO, Cobalt Ferrite) particles dispersed in a pure perovskite P b[Zr0.52T i0.48]O3 (PZT, Lead Zirconate Titanate) matrix have been studied. The main …
-
Study Of Probabilistic Characteristics Of Local Field Fluctuations In Isotropic Two Phase Composites: Conductivity Type Problems
… field and electric potential in two-phase particulate composite materials with spherical inclusions are found in the limit of small particle concentration. Additionally a method for the approximation of local fields within random statistically isotropic composites with a finite number of …
-
IGFEM-based reduced-order modeling and design of nonlinear composites
… nonlinear solver to model the failure of composite materials is developed using an Interface-enriched Generalized Finite Element Method (IGFEM). Cohesive interfacial failure and damage mechanisms in the constituents are the primary source of nonlinearity and the shape of material …
-
A Biomimic Self-healing Shape Memory Polymer Based Syntactic Foam for Smart Structural Composites
… service life extension in structural polymeric composites. The objective was to self-heal structural-length scale damage in an autonomous, efficient, timely and repeatable manner at the molecular-length scale. Self-healing is achieved through a novel two step close-then-heal (CTH) self-healing …
-
Análise do efeito do tempo da moagem de alta energia no tamanho de cristalito e microdeformação da rede cristalina do WC-Co
Hard metals are the composite developed in 1923 by Karl Schröter, with wide application because high hardness, wear resistance and toughness. It is compound by a brittle phase WC and a ductile phase Co. Mechanical properties of hardmetals are strongly dependent on the microstructure of the WC Co, …
-
ΣΚΕΔΑΣΗ ΘΕΡΜΟΕΛΑΣΤΙΚΩΝ ΚΥΜΑΤΩΝ ΣΕ ΣΥΝΘΕΤΑ ΥΛΙΚΑ ΚΑΙ ΠΡΟΣΔΙΟΡΙΣΜΟΣ ΤΩΝ ΘΕΡΜΟΜΗΧΑΝΙΚΩΝ ΤΟΥΣ ΙΔΙΟΤΗΤΩΝ
… OF DYNAMIC THERMOMECHANICAL PROPERTIES OF A PARTICULATE COMPOSITE IS PROPOSED AND AN APPLICATION FOR APARTICULATE COMPOSITE WITH RIGID, THERMAL INSULATED SPHERICAL INCLUSIONS IS INCLUDED.
-
Species Dependence of pMDI/Wood Adhesion
… (pMDI) has increasingly been used in the wood particulate composite industry. Wood composites, especially oriented strand board (OSB) are made with many variations of wood species. Little research has been done to investigate how pMDI adhesion has been affected by species. The present is …
-
Modeling the effect of debonding on the constitutive response of heterogeneous materials
Experimental studies have observed that particulate composite systems experience damage in three principal modes: failure of the interface between particle and binder; tearing of the matrix; and fracture of the particle. Interfacial debonding is often a precursor to the other failure processes and …
-
Influence of storage environment upon crack opening and growth in composite solid rocket propellant
… temperature, loading rate, and thickness on this particulate composite, tests were conducted at three temperatures and two loading rates. Both uncracked and edge cracked "biaxial" specimens were produced from solid rocket propellant. The stress relaxation modulus and stress-strain data were …
-
Influence of Elastic Mismatch and Nature of Interfacial Bonding on Toughness of Particulate Composites
… of crack-particle interaction in model brittle particulate composites where,</p> <p>i) the interfacial bonding strength between second phase and matrix was continuously varied (glass - partly oxidized Ni system) and</p> <p>ii) the presence and absence of elastic mismatch between second phase and …
-
Linking properties to microstructure in liquid metal embedded elastomers via machine learning
… embedded in an elastomer matrix to obtain soft composites with unique thermal, dielectric, and mechanical properties. They have applications in soft robotics, biomedical engineering, and wearable electronics. By linking the structure to the properties of these materials, it is possible to …
-
Additive Manufacturing Materials: Fabrication of Aluminum Matrix Composites
… the production of high-quality aluminum matrix composite (AMC) powder for powder bed fusion (PBF) additive manufacturing (AM). The spectrum of aluminum-based materials available for AM remains limited due to complex melting and solidification dynamics inherent to the process. To overcome these …
-
Stress Fields in Composites with a Variable Interphase Under Thermo-Mechanical Loadings
An interphase in a composite material has a important role for the composite performance. It influences directly or indirectly the strength, fatigue performance and effective properties of the composite. Recently, interphase has drawn increasing attention in composite mechanics. To the best of our …
-
Overall Mechanical Response of Soft Composite Materials with Particulate Microstructure at Finite Strains
Many soft, composite materials manufactured or found in nature consist of a homogeneous matrix phase and a random distribution of micron-sized particles in the matrix. Examples among engineering materials include reinforced elastomers, microgel suspensions and polymer-matrix composites, whereas …
-
A micromechanical approach for predicting the complex shear modulus and accumulated shear strain of asphalt mixtures from binder and mastics
Asphalt mixtures are particulate composite materials consisting of uniformly distributed mineral aggregates, asphalt binder and air voids. Mixtures of asphalt binder and filler, also called mastics, are often assumed to behave as simple viscoelastic materials, where the binders are stiffened by the …
Page 1 of 2