Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"Passivated contacts"”.
-
Passivated contacts for high efficiency monocrystalline silicon solar cells
… cells. Efficiency improvements are enabled via passivated contacts, which serve both as a contact layer and a passivation layer for the crystalline silicon (c-Si) surface, and are a potential candidate for next-generation industrial c Si solar cells. In this thesis work, we identify a few …
-
Encapsulant characterization and doped passivated contacts for use in a luminescent solar concentrator
… characterization and the fabrication of passivated interdigitated back contact silicon solar cells using spin-on dopants for use in a luminescent solar concentrator. For the luminescent solar concentrator to be successful, the encapsulants used to assemble the final device must not …
-
DEVELOPMENT OF NOVEL ULTRATHIN TUNNEL LAYERS FOR CARRIER SELECTIVE PASSIVATED CONTACTS IN SOLAR CELLS
Tunnel layer passivated contacts have enabled low recombination losses and high energy conversion efficiencies for silicon solar cells. This work is aimed at investigating if the presence of high interface charge in tunnel layers can further enhance carrier selectivity of passivated contacts and in …
-
ULTRA-THIN ALUMINIUM OXIDE TUNNEL LAYER PASSIVATED CONTACT FOR HIGH-EFFICIENCY CRYSTALLINE SILICON SOLAR CELLS
… To passivate the metalized region, tunnel layer passivated contacts have been proposed. However, so far hole-selective contacts need further optimizations. This thesis first proposes an improved methodology to extract interface properties of dielectric layer passivated silicon wafers. …
-
Development of low-cost high-efficiency tunnel oxide passivated contact silicon solar cells
… boron emitter on front and tunnel oxide passivated contact (TOPCon) on the rear side of an n-type silicon wafer, in combination with advanced fine-line screen-printing metallization with floating busbars to attain the efficiency target. In addition, a next-generation industry-compatible …
-
Low cost high efficiency screen printed solar cells on Cz and epitaxial silicon
… are studied and modeled by implementation of passivated contacts composed of tunnel oxide, n+ polycrystalline Si and metal on top of n-type Si absorber to reduce the cost ($/Wp) of PV module.
-
Development and Fabrication of High Efficiency N-Type Tunnel Oxide Passivated Silicon Solar Cells with APCVD, Ion Implanted, and BBr3 Boron Emitters
… silicon solar cells utilizing tunnel oxide passivated contacts (TOPCon) on rear and optimized boron-doped emitters on front of a n-type Si wafer. Incorporating an ultra-thin tunnel oxide capped with doped poly-Si significantly reduces minority carrier recombination in the doped and …
-
Surface and contact passivation for silicon solar cells: exploring new approaches
… more rapid uptake of new cell designs employing passivated contacts. An initial re-assessment of the current dielectric deposition techniques revealed an important experimental artefact arising from a commonly-used plasma reactor. The artefact was shown to impact the optical (~1.3% relative loss …
-
Development and characterization of bifacial p-type silicon shingle solar cells with edge passivation
… and characterization of bifacial p-type shingled passivated edge, emitter, and rear (pSPEER) solar cells. The new cell structure connects the concepts of bifaciality, shingling, and the p-type silicon passivated emitter and rear cell (PERC). To obtain the pSPEER solar cells, full wafer-sized host …
-
Development and characterization of resource-saving doping processes for industrial silicon solar cells
… energy consumption during the manufacturing of passivated emitter and rear (PERC) and tunnel oxide passivated contacts (TOPCon) solar cells. This thesis investigates high throughput approaches for the thermal processes diffusion and/or oxidation in the manufacturing sequence of PERC and TOPCon …
-
Development of commercial high-efficiency solar cells incorporating selective emitters and passivated rear contacts
… laser-doped selective emitter and localised rear contacts. This thesis begins with the development of laser-doped selective emitter (LDSE) technology to overcome the limitations of the front surface design associated with the industrial screen-printed solar cells. In this technology, laser doping …
-
Nickel Silicide as a Contact and Diffusion Barrier for Copper Metallization in Silicon Photovoltaics
… and quantum efficiency (QE) better than Cu/TiN contacts without NiSi and at least as good as Ti/Pd/Ag contacts on average. These methods and materials were applied to high efficiency, textured, solar cells with passivated tunneling contacts. The viability of NiSi in this regime was evaluated by …
-
Titanium dioxide as minority charge carrier separating contact to crystalline p-type silicon
… recombination rate at the metal / semiconductor contacts is one of the last remaining obstacles in order to improve the conversion efficiency of crystalline silicon solar cells. One of the most promising approaches are passivated carrier selective contacts which enable a selective charge carrier …