Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 97 for “"Passive Elements"”.

  1. Prismatic Modular Robotics Enabled Through Active and Passive Elements

    … robot can be actively controlled or can respond passively to external forces. The modular elements can be connected simply for ease of manual reconfiguration. A new connectivity strategy for building modular robotic structures using rigid connector nodes, active and passive modular elements is …

    whiterose Download PDF for Prismatic Modular Robotics Enabled Through Active and Passive Elements (opens in a new tab)

  2. Adaptive single to three-phase converter using variable passive elements

    … supply to a three-phase balanced voltage, using passive elements. Three distinct methodologies have been developed, each with its own merits and constructed prototypes. The seven chapters of this thesis contain large amound of non-real and real-time simulated results. These results were then …

    cape-town Repository record for Adaptive single to three-phase converter using variable passive elements (opens in a new tab)

  3. Integration of passive elements into ventilation and air-conditioning of buildings

    … for air-conditioning is evident. Integration of passive features into the building design is an energy efficient option for maintaining thermal comfort and minimising the air-conditioning demand in buildings. Passive features are components that can be integrated as part of the building at the …

    adelaide Repository record for Integration of passive elements into ventilation and air-conditioning of buildings (opens in a new tab)

  4. MICRO AND MILLIMETER WAVE CIRCUIT DESIGN IN SILICON WITH CONSIDERATIONS FOR NOISE REDUCTION AND ON-CHIP PASSIVE ELEMENTS

    … noise must be curtailed and the dimensions of passive structures are comparable to the signal wavelength. Many of the techniques employed are intended to combat the limitations of the silicon substrate; even beyond the frequency limitations of the devices, and towards overcoming and in some …

    cornell Repository record for MICRO AND MILLIMETER WAVE CIRCUIT DESIGN IN SILICON WITH CONSIDERATIONS FOR NOISE REDUCTION AND ON-CHIP PASSIVE ELEMENTS (opens in a new tab)

  5. Antenna arrays based on reactively loaded overlapping sub-arrays: reduce and re-use

    … of one directly fed antenna element and several passive reactive-loaded elements. The feeding of the passive elements is achieved by exploiting a free-space coupling instead of more conventional schemes based on a complex distribution network. This results in a drastic reduction in the complexity …

    greece Repository record for Antenna arrays based on reactively loaded overlapping sub-arrays: reduce and re-use (opens in a new tab)

  6. Coverage Performance Analysis of Reconfigurable Intelligent Surface-aided Millimeter Wave Network with Blockage Effect

    … BSs only. Secondly, for a given total number of passive elements, whether fewer large-scale RISs or more small-scale RISs should be deployed has yet to be investigated in the presence of the blockage effect. In the second paper, we model and analyze a 3D outdoor mmWave RIS-aided network …

    whiterose Download PDF for Coverage Performance Analysis of Reconfigurable Intelligent Surface-aided Millimeter Wave Network with Blockage Effect (opens in a new tab)

  7. User participation in passive solar housing design

    … and behavioral adaptations of two groups of passive solar homeowners, those with high or low levels of participation in the design and/or building process. Forty-one Virginia passive solar homeowners were surveyed and interviewed in their home. Photographic slides and floor plans with …

    utk-theses Repository record for User participation in passive solar housing design (opens in a new tab)

  8. Power Gain Optimization for Multiple Active Multiple Passive Dipole Antenna Arrays

    … dipole antenna arrays of both active and passive dipole elements. The traditional approach assumes sinusoidal current distributions. Herein, we obtain the exact distribution from the Hallen equations using the Method of Moments (MoM). We show that the current distributions on the dipole …

    carleton Repository record for Power Gain Optimization for Multiple Active Multiple Passive Dipole Antenna Arrays (opens in a new tab)

  9. Digitally controlled "programmable" active filters

    … for their high stability and low active and passive sensitivity. CMOS switches are used to electronically relocate the minimum number of passive elements to achieve function programmability. Switches are also used to select the number of cascaded sections to realize higher order transfer …

    nps Repository record for Digitally controlled "programmable" active filters (opens in a new tab)

  10. Dummy TSV-Based Timing Optimization for 3D On-Chip Memory

    … be modeled with equivalent circuits consisted of passive elements. In this thesis, we use “dummy” TSVs as electrical delay units in 3D SRAMs. Our results prove that dummy TSVs based delay units are as effective as conventional delay cells in performance, increase the operational frequency of SRAM …

    ndsu Repository record for Dummy TSV-Based Timing Optimization for 3D On-Chip Memory (opens in a new tab)

  11. Improving dynamic performance in dc microgrids using trajectory control

    … renewable energy sources, and energy storage elements within networks that can operate independently from the main grid. Due to their high efficiency, increasing technological viability and resilience to natural disturbances, they are set to gain popularity. When load-side converters in a …

    ubc Repository record for Improving dynamic performance in dc microgrids using trajectory control (opens in a new tab) Download PDF for Improving dynamic performance in dc microgrids using trajectory control (opens in a new tab)

  12. A dual-mode wide-band CMOS oscillator for millimeter-wave applications

    … core around the resonant tank, without switching passive elements within the tank itself. The configuration helps to minimize the difference in phase noise performance between the two modes, while achieving a wide tuning range. To verify the concept, a mm-wave VCO that operates at 30-GHz is …

    texas Repository record for A dual-mode wide-band CMOS oscillator for millimeter-wave applications (opens in a new tab)

  13. State-space analysis and synthesis of active RLC networks

    … sources are controlled by the variables of the passive elements and the independent sources. The topological relationships of the network elements and controlled sources appear explicitly in the various submatrices of the state model representations. Such a formulation is helpful in providing an …

    must-thes Repository record for State-space analysis and synthesis of active RLC networks (opens in a new tab)

  14. ALL-OPTICAL DELTA-SIGMA MODULATOR DESIGN AND IMPLEMENTATION

    … semiconductor optical amplifier (SOA) and other passive elements like optical filter, isolator and coupler. All experiments are done on optical table and proper results achieved. Thus the new bi-stable switch is designed and implemented by using “inverted bistable switch” and “non-inverted …

    siu-theses Repository record for ALL-OPTICAL DELTA-SIGMA MODULATOR DESIGN AND IMPLEMENTATION (opens in a new tab)

  15. A 9dB Back-off GaN Doherty Amplifier

    … as the output combiner made up of lumped passive elements. The amplifier design is implemented in a underdeveloped GaN-on-Silicon technology which is modelled to have a power density of 5 W/mm. The simulated version achieves a backed-off power added efficiency of 50.5%, an improvement of …

    carleton Repository record for A 9dB Back-off GaN Doherty Amplifier (opens in a new tab)

  16. Active suspension co-design for lateral stability of rail vehicles

    … railways. Traditionally railways have utilized passive suspension systems, but maintaining dynamic stability at higher speeds demands enhancements to existing rail vehicle suspensions. One strategy to improve dynamic performance is to incorporate active or semi-active elements, such as force …

    uiuc Repository record for Active suspension co-design for lateral stability of rail vehicles (opens in a new tab)

  17. A non-conventional multilevel flying-capacitor converter topology

    … connection is needed, (3) reduced number of passive elements as compared to the conventional solution, (4) reduced total dc source value by comparison with the conventional topology. The proposed four-level capacitor-clamped H-Bridge converter can be utilized as a multilevel inverter …

    iupui Repository record for A non-conventional multilevel flying-capacitor converter topology (opens in a new tab)

  18. Synthesis and characterization of carbon nanotubes using scanning probe based nano-lithographic techniques

    … MEMS (Micro Electrical Mechanical Systems) elements and passive elements. These were coated with Fullerene using Physical Vapor Deposition or through a solution in an organic solvent. Catalyst precursors were deposited on these Fullerene coated substrates using “wet processes”. These …

    tamu Repository record for Synthesis and characterization of carbon nanotubes using scanning probe based nano-lithographic techniques (opens in a new tab)

  19. Fully integrated cmos phase shifter/vco for mimo/ism application

    … concern which seems difficult with use of passive elements for integrated applications. This work is presents a new method for implementing phase shifters using only active CMOS elements which dramatically reduce the occupied area and make the tuning feasible. Also a fully integrated …

    tamu Repository record for Fully integrated cmos phase shifter/vco for mimo/ism application (opens in a new tab)

Page 1 of 5