Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Pavements--Testing"”.
-
The coefficients of thermal conductivity for pavement materials as determined by the guarded hot
Thesis (B.S.)--Michigan State College, 1949
-
Improved rolling dynamic deflectometer testing and analysis procedures
… of this new rolling sensor are: (1) increased testing speed from 1 to 3 mph (1.6 to 4.8 km/hr), and (2) reduced the level of rolling noise during RDD measurements. With this rolling sensor, the RDD can collect more deflection measurements at a speed of 3 mph (4.8 km/hr). Field trials using the …
-
Predicting in-service fatigue life of flexible pavements based on accelerated pavement testing
… beam test. Full-scale Accelerated Pavement Testing (APT) is an alternative to laboratory testing leading to advances in practice and economic savings for the evaluation of new pavement configurations, stress level related factors, new materials and design improvements. This type of testing …
-
A LABORATORY INVESTIGATION AND MODELING OF DYNAMIC MODULUS OF ASPHALT MIXES FOR PAVEMENT APPLICATIONS
… excessive deformation. Early deterioration of pavements due to rutting, fatigue cracking, and other type of distresses may be attributed to inadequate stiffness. The mechanistic empirical pavement design guide (MEPDG) emphasizes the use of dynamic modulus of asphalt mixes at all three levels of …
-
Impact of the design inputs for the overlay design in the mechanistic-empirical pavement design guide
… related to the existing pavement. For composite pavements, overlay thickness and HMA air voids are significant inputs for the overlay layer. In addition, among the inputs related to the existing intact PCC pavement, the existing thickness and PCC layer modulus have a significant effect on …
-
Evaluation of pavement management data and analysis of treatment effectiveness using multi-level treatment transition matrices
… 2) the conditions and distresses of the pavements in the passing lanes could be accurately predicted using the newly developed methodologies, the historical condition and distress data of the driving lane, and traffic distribution. 3) the details of the existing cost data did not support …
-
Impact of structure, material properties, temperature curling, and trafficking on load transfer efficiency
… on load transfer efficiency of rigid airfield pavements. The current FAA mechanistic design procedure for rigid pavements assumes constant stress-based load transfer efficiency (LTE (S)) of 25% at the joints. The design procedure assumes the material properties remain constant throughout the …
-
Investigation of compaction characteristics of subbase material using the superpave gyratory compactor
… Aviation Administration's (FAA) full-scale testing and Superpave Gyratory Compactor testing to determine if the SGC is a valuable tool for the prediction of airport pavement performance and design. The practicality of the SGC was based on extensive laboratory and field testing of three …
-
Study of load transfer efficiency of airfield rigid pavement joints based on stresses and deflections
The concept of joint load transfer efficiency is very important and fundamental to Federal Aviation Administration's (FAA) airfield rigid pavement thickness design procedures. The FAA procedure assumes 25% of stress applied to the edge is transferred to the adjoining slab. Moreover, since it is not …
-
Analytical and Experimental Stresses in Concrete Pavements and Unbonded Overlays
… the accuracy of calculating stresses in concrete pavements and unbonded overlays under different loading conditions. The computed stresses for the single layer pavements are obtained based on Westergaard theory, the finite-element model (ILLI-SLAB), and the elastic layered model (ELSYM5). For the …
-
Application of relational database principles for rating bituminous coarse aggregates with respect to frictional performance
… means, historical data on skid resistance of pavements constructed with a given aggregate can be used in the evaluation of aggregates. This alternative procedure is used by TxDOT to overcome the shortcomings of using laboratory test data. Highway agencies may use either of the above mentioned …
-
Verification of the dissipated energy based fatigue model using field data
… can be limited to the top layer in perpetual pavements through the use of a very thick surface layer or a binder-rich intermediate layer. To achieve this goal, tensile strains at the bottom of the top hot-mix asphalt (HMA) layer must be limited to below a certain value known as the fatigue …
-
Influence of lightweight deflectometer design parameters on measured deflection and estimation of modulus, The
Includes bibliographical references (leaves 117-122).
-
A mechanistic-empirical approach for evaluating the effect of diamond grinding and thin overlay on predicted pavement performance
Advancements in pavement management practice require evaluating the performance of pavement preservation treatments using performance-related characteristics. However, state highway agencies face the challenge of developing performance-based relationships between quality characteristics of pavement …
-
Backcalculation of pavement layer properties from deflection data
Thesis (Ph.D.)--Michigan State University. Department of Civil and Environmental Engineering, 1993
-
Dynamic finite element simulations of vibratory roller soil stiffness using iterative stress-dependent resilient moduli
This thesis presents the application of the stress-dependent National Cooperative Highway Research Program (NCHRP) Mechanistic Empirical Pavement Design Guide (MEPDG) model for resilient modulus, , in dynamic finite element analyses of pavement systems loaded by vibratory rollers. The MEPDG model …
-
A proposed model for comparing the performance of neural networks and statistical approaches in predicting project profits of an asphalt paving company
<p>It is currently assumed that the performance of a model for predicting project profits of an asphalt paving company varies with an unknown number of parameters. An earlier study indicates that the parameters are not well understood (Berry, 1990). A search of the literature suggests that the …