Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Peak-Current-Mode"”.

  1. Evolution of current mode control approaches for implementation in rapid capacitor charger technology

    … power management parameters to these systems. Current mode control is seen as a desirable control method for the power inverter to quickly charge the capacitor bank. An analog current mode control platform has been demonstrated at the P3E (pulsed power and power electronics) Laboratory. …

    ttu Repository record for Evolution of current mode control approaches for implementation in rapid capacitor charger technology (opens in a new tab)

  2. Control And Topology Improvements In Half-bridge Dc-dc Converters

    … employs two MOSFETs to freewheeling the leakage current when the main MOSFETs of the half-bridge are both off. Driving voltage variation on the secondary side Synchronous Rectifier (SR) MOSFETs in self-driven circuit due to input voltage variation in bus converter applications is also …

    ucf Repository record for Control And Topology Improvements In Half-bridge Dc-dc Converters (opens in a new tab)

  3. Design and Development of High-Frequency Switching Amplifiers Used for Smart Material Actuators With Current Mode Control

    … develop a highly efficient power amplifier, and peak current mode control is proposed to reduce the actuator's hysteretic behavior. Since the low frequency current loop gain tends to be low due to the circuit's capacitive load, average current mode control is further proposed to boost the low …

    vt Repository record for Design and Development of High-Frequency Switching Amplifiers Used for Smart Material Actuators With Current Mode Control (opens in a new tab)

  4. Average current-mode control and charge control for PWM converters

    Two control schemes for PWM converters, average current-mode (ACM) control and charge control, are studied in this dissertation. The small-signal models are derived for continuous-conduction mode PWM converters employing these two controls. Sampled-data modeling is applied to the current loop …

    vt Repository record for Average current-mode control and charge control for PWM converters (opens in a new tab)

  5. Current-Mode Control: Modeling and its Digital Application

    Due to unique characteristics, current-mode control architectures with different implementation approaches have been widely used in power converter design to achieve current sharing, AVP control, and light-load efficiency improvement. Therefore, an accurate model for current-mode control is …

    vt Repository record for Current-Mode Control: Modeling and its Digital Application (opens in a new tab)

  6. High performance control of VRM circuits

    … because of its ability to handle large load current and to achieve fast dynamic transient response under large step-load condition.The first part of this thesis fully investigates this issue for three popular control schemes used currently: Voltage Mode Control (VMC), Average Current Mode …

    nus Repository record for High performance control of VRM circuits (opens in a new tab) Download file for High performance control of VRM circuits (opens in a new tab)

  7. A line and load independent zero voltage switching DC/DC full bridge converter topology

    … blocking capacitor is essential to prevent the current sense transformer from saturation, and the study of this thesis shows that contrary to the conventional pulse width modulated full bridge converter, the peak current mode control can still be used along with the blocking capacitor in a phase …

    concordia Download PDF for A line and load independent zero voltage switching DC/DC full bridge converter topology (opens in a new tab)

  8. Sensorless Digital Control for Solar DC Optimizers Used in DC Microgrids

    … This task is done through a variable frequency peak current mode (PCM) control technique. Implementing this ZVS control scheme increases the input inductor current ripple. Therefore, an interleaved structure is used, which is able to reduce the input current ripple through the phase shifting of …

    queens Repository record for Sensorless Digital Control for Solar DC Optimizers Used in DC Microgrids (opens in a new tab)

  9. Modular multilevel converters with partially integrated battery energy storage

    … Transient (EMT) simulations. A continuous-time model of the MMC-BESS is developed based on the state-space equations of the converter. The proposed model enhances computational efficiency in two key ways: (i) it significantly reduces the number of nodes in the conventional switching model, …

    manitoba Repository record for Modular multilevel converters with partially integrated battery energy storage (opens in a new tab)

  10. Improved Models for DC-DC Converters

    … performance control of a dc-dc converter, a good model of the converter is needed. It is suitable to consider the load to be included in the converter model since it usually affects the dynamics. The load is often the most variable part of this system. If the load current and the output voltage …

    lund Repository record for Improved Models for DC-DC Converters (opens in a new tab) Download PDF for Improved Models for DC-DC Converters (opens in a new tab)

  11. Design of robust controllers for telecom power supplies

    … converters operating in continuous inductor current mode with either voltage mode control or peak current mode control are modeled and analyzed using state-space representation. The H∞ control design is used in order to guarantee the robust stability and robust performance of the system in …

    aalto Repository record for Design of robust controllers for telecom power supplies (opens in a new tab)

  12. DC-DC Converters - Dynamic Model Design and Experimental Verification

    … performance control of a dc-dc converter, a good model of the converter is needed. The load usually affects the dynamics and one way to take this into consideration is to regard the load as a part of the converter. The load is often the most variable part of this system. If the load current and …

    lund Repository record for DC-DC Converters - Dynamic Model Design and Experimental Verification (opens in a new tab) Download PDF for DC-DC Converters - Dynamic Model Design and Experimental Verification (opens in a new tab)

  13. Modeling of V2 Control with Composite Capacitors and Average Current Mode Control

    Various types of current mode control are being used in different applications. Model for current mode control is indispensable for proper system design. Since 1980s, modeling of current mode control has been a hot topic in power electronics field. In current mode control, sub-harmonic oscillation …

    vt Repository record for Modeling of V2 Control with Composite Capacitors and Average Current Mode Control (opens in a new tab)

  14. Magnetics Design For High Current Low Voltage Dc/dc Converter

    … of the key issues to implement low voltage high current DC/DC converter. Planar technology has many advantages. It has low profile construction, low leakage inductance and inter-winding capacitance, excellent repeatability of parasitic properties, cost efficiency, great reliability, and excellent …

    ucf Repository record for Magnetics Design For High Current Low Voltage Dc/dc Converter (opens in a new tab)

  15. Pulse Frequency Modulation Zcs Flyback Converter In Inverter Applications

    … and output stable and synchronizing sinusoid current into the utility grid. In Chapter 1, the characteristic I-V and P-V curve of PV array has been illustrated. Based on prediction of the PV power capacity installed on the grid-connected and off-grid, the trends of grid-tied inverter for DG …

    ucf Repository record for Pulse Frequency Modulation Zcs Flyback Converter In Inverter Applications (opens in a new tab)

  16. Synchronized Communication Network for Real-Time Distributed Control Systems in Modular Power Converters

    … It is proved that with appropriate arm current shaping in the timescale of a switching period, referred as the switching-cycle control (SCC), such line-frequency dependence can be eliminated and MMCs are enabled to work even in dc-dc mode. Yet the SCC demands multiple times of arm …

    vt Repository record for Synchronized Communication Network for Real-Time Distributed Control Systems in Modular Power Converters (opens in a new tab)

  17. Fuel Cell Distributed Generation: Power Conditioning, Control and Energy Management

    … examined. The selected converter is first modeled to gain insight into its behavior for the purpose of designing suitable compensators. MATLAB is then used to study the results using the frequency domain, and it was observed that the converter offers its own unique challenges in terms of …

    waterloo Repository record for Fuel Cell Distributed Generation: Power Conditioning, Control and Energy Management (opens in a new tab)

  18. Advanced Control Schemes for High-Bandwidth Multiphase Voltage Regulators

    … it is found that the stability margin of current-mode control in high-BW design is very sensitive to operating conditions and component tolerance, depending on the performance of the current-sensing techniques, modulation schemes, and interleaving approaches. The primary objective of this …

    vt Repository record for Advanced Control Schemes for High-Bandwidth Multiphase Voltage Regulators (opens in a new tab)

  19. Evaluation of boost converter and single phase inverter circuit efficiency improvement using silicon carbide devices and IGBTs

    … and standalone photovoltaic system. The dynamic modelling of boost converter was derived based on State-Space Average Model. It can be depicted from the control-to-voltage transfer function that there was no RHP zero in case of discontinuous conduction mode of boost converter which resembled …

    unsw Repository record for Evaluation of boost converter and single phase inverter circuit efficiency improvement using silicon carbide devices and IGBTs (opens in a new tab)

  20. Dynamiskt LED-system för växter - Dynamic LED Control System for Agriculture

    … The goal is to achieve higher efficiency than current HPS-based lighting systems used in agriculture. The project encompasses the design and testing of a PCB used to drive and control a LED PCB. The prototype was constructed to allow both manual control of individual channels and automatic …

    chalmers Repository record for Dynamiskt LED-system för växter - Dynamic LED Control System for Agriculture (opens in a new tab)

Page 1 of 2