Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 76 for “"Pearlitic"”.
-
Ultrasonic propagation and scattering in pearlitic steel
… backscatter on such a microstructure in pearlitic wheel steel. An ultrasonic attenuation model is developed to study the influence of pearlite phase on ultrasonic attenuation. The experimental results show that both ultrasonic scattering amplitudes and longitudinal attenuation drop …
-
Experimental characterization of pearlitic rail steel after thermomechanical straining
… the knowledge of the material behaviour of pearlitic rail steels (grade R260) under combined thermal and cyclic mechanical loading. The goal was to produce a microstructure with higher accumulated strains compared to previous work. It was achieved by adding a heat treatment to the …
-
Macroscopic and microscopic strain-life behavior of pearlitic malleable iron
Thesis (M.S.)--Michigan State University. Department of Metallurgy, Mechanics and Materials Science, 1984
-
Microstructural characterisation of pearlitic and complex phase steels using image analysis methods
… not been widely applied with all steels such as pearlitic steels or complex multi-phase steels due to their complex microstructures. These microstructures may contain features that cannot be resolved by optical microscopy, and in which important information is contained in their texture rather …
-
The correlation of microstructure with the strength and fracture toughness of pearlitic steels
… microstructure on the toughness of high carbon pearlitic steels was studied using standard Charpy, instrumented-impact and plane strain fracture toughness tests. Controversy in the literature regarding the influence of pearlite colony and prior-austenite grain boundaries in obstructing cleavage …
-
Hot deformation, microstructure, and property analysis of ferritic/pearlitic and bainitic microalloyed forging steels
Includes bibliographical references.
-
The Influence of Steel Composition on the Strain Ageing Response of High Strength Pearlitic Wire.
… the appropriate starting microstructure (fully pearlitic) and drawn to wire. The set of experimental steels were artificially aged and tested alongside a commercially produced steel wire for comparison. A selection of available global and localised experimental techniques was used to …
-
Effect of manganese and nickel additions in the welding flux on the fusion zone of pearlitic ductile iron, The
Includes bibliographical references (pages 214-224).
-
ΕΠΙΔΡΑΣΗ ΤΗΣ ΠΑΡΟΥΣΙΑΣ ΤΟΥ ΧΑΛΚΟΥ ΣΤΟΝ ΠΕΡΛΙΤΙΚΟ ΚΑΙ ΜΠΑΙΝΙΤΙΚΟ ΜΕΤΑΣΧΗΜΑΤΙΣΜΟ ΤΩΝ ΧΑΛΥΒΩΝ
… OF ROW COMMONSUBSTITUTIONAL SOLUTES INFLUENCE PEARLITIC TRANSFORMATION IT WAS FOUND THAT PRECIPITATES BELONGING TO THE PHASE E-CU EXISTED WITHIN THE PROEUTECTOID PHASES EITHER THE PROEUTECTOID CEMENTITE OR THE PROEUTECTOID FERRITE. WITHING PEARLITESTHE PRESENCE OF SMALL E-CU PRECIPITATES WAS …
-
Multiscale study of the pearlitic microstructure in carbon steels: atomistic investigation and continuum modeling of iron and iron-carbide interfaces
… to compressive and tensile straining of the pearlitic orientation relationships. A range of interlamellar spacings and ferrite to cementite ratios are considered, and values for important mechanical properties including elastic modulus, yield stress, flow stress, and ductility are determined. …
-
Effect of alloying additions in the welding flux on the graphitization and nodularization of the fusion zone in pearlitic ductile iron, The
Includes bibliographical references.
-
Microstructural analysis of three iron meteorites : Arispe, Inland Forts and Ocotillo
… plessitic structures in the two octahedrites; pearlitic, spheroidal, acicular, martensitic and comb plessite structures were common. The pearlitic and spheroidal plessite structures in Arispe were typically found in the vicinity of cohenite ((Fe,Ni) <sub>3</sub>C) ‘nests' . The pearlitic …
-
A transmission electron microscopy examination of plessite structures in the Arispe iron meteorite
… the Arispe iron meteorite as fine and coarsened pearlitic (lamellar), spheroiditic, and microwidmanstatten a structure. Each of these structures consists of kamacite and a high-Ni unidentified taenite phase, identification of the high-Ni taenite phase can aid in the determination of the Fe-Ni …
-
The Effects of Carbon Equivalent, Return Ratios, Mold Preparation, Riser Feed and Casting Temperature on the Microstructural and Mechanical Properties of 100-70-03 Pearlitic Ductile Iron
… and casting temperature on a target of 100-70-03 pearlitic, hypereutectic ductile iron provided the groundwork for an ICME database. Density decreased when the fraction of graphite nodules was greater due to the low density of graphite. A greater percentage of return scrap and higher CE level …
-
The Impact Behavior of Austempered Ductile Iron at Sub-Zero Temperatures
… of ferritic ductile iron (DI) grade 60-40-18 and pearlitic DI grade 100-70-03. Two series of experiments were conducted: in the first series unnotched specimens of each ADI grade along with ferritic DI grade 60-40-18 and pearlitic DI grade 100-70-03 comparative samples were tested at temperatures …
-
Ductile-brittle transition behaviour and its underlying mechanisms in steel: effects of cementite morphology
… effect of cementite morphology, spheroidised and pearlitic lamellar, on the ductile-brittle transition behaviour of structural steel, and to deepen our basic knowledge on an experimental basis. The key questions to have been tackled and answered in this research are the following: 1) how cementite …
-
Effects of copper on the metallurgical, mechanical, and fracture properties of 0.90 carbon rail steels, The
… mechanical, and fracture properties of pearlitic rail steels with a base composition (in wt pct) of 0.9 C, 1.0 Mn, 0.35 Si, and 0.01 Ti were evaluated. Six industrial heats with copper content ranging from (in wt pct) 0.07 to 0.85 were cast, re-heated, rolled and air-quenched with …
-
ALLOYING OF THIN-WALL DUCTILE IRON CASTINGS
… rates in thin castings will result in a fine, pearlitic lamellar spacing and a fine microstructure. The fast cooling rate inhibits the distance that carbon will diffuse. Fine pearlitic microstructures have shown a promising increase in both yield and tensile strengths. Thin section ductile iron …
Page 1 of 4