Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1858 for “"Pellets"”.

  1. Durability of wood pellets

    Durability is used for quantifying the quality of pellets by measuring the percentage of broken pellets. This work conducted durability measurement using different approaches, including Dural, Tumbler and drop test, and established relationship between them. In particular, 1) we developed a robust …

    ubc Repository record for Durability of wood pellets (opens in a new tab) Download PDF for Durability of wood pellets (opens in a new tab)

  2. Hydrochar Enhanced Wood Pellets

    … design a process to manufacture industrial wood pellets with superior handling capabilities to traditional wood pellets without sacrificing the energy density of the pellets and conforming to standards. In the design of the process, the objectives were to minimize cost, environmental impacts, and …

    unr Repository record for Hydrochar Enhanced Wood Pellets (opens in a new tab)

  3. Calorific value of wood pellets

    The export of wood pellets from Canada to Europe has been increasing steadily in recent years (roughly 1.8 million ton in 2013). Due to distances involved, wood pellets remain in transit and storage for months before their final consumption. The net calorific value determines the price of wood …

    ubc Repository record for Calorific value of wood pellets (opens in a new tab) Download PDF for Calorific value of wood pellets (opens in a new tab)

  4. Flux Trapping in Superconducting Pellets

    This research concerns the effects on samples of nominal composition Bi1.8Pb0.2Sr2Ca2Cu3Oy which were exposed to hot, dense argon in a ballistic compressor. The investigations were concentrated on two specimens which were exposed to hot, dense argon at about 1800 K (peak pressure 330 atm) and 1500 …

    portland-state Repository record for Flux Trapping in Superconducting Pellets (opens in a new tab)

  5. Counterflow cooling of feed pellets

    Thesis (M.S.)--Michigan State University. Department of Agricultural Engineering, 1988

    msu Repository record for Counterflow cooling of feed pellets (opens in a new tab)

  6. Reduction properties of doped hematite pellets.

    … study the reduction properties of doped hematite pellets, with special reference to the properties demanded by direct reduction (DR) processes, viz: high reducibility coupled with low dimensional changes and high strength during reduction. Iron oxide ores doped with lime, silica and alumina were …

    sheffield-hallam Download PDF for Reduction properties of doped hematite pellets. (opens in a new tab)

  7. Automated inspection of sintered uranium fuel pellets

    … inspection process of UO2 (uranium dioxide) fuel pellets is presented. The scanning process examines the surface of each pellet for correct manufacturing parameters. In this work, three inspection technologies have been investigated: laser scanning of surface roughness, 2D laser scanning of …

    uoit Repository record for Automated inspection of sintered uranium fuel pellets (opens in a new tab)

  8. UNDERSTANDING STRENGTH OF DRIED IRON ORE PELLETS

    … of binders or mixtures of binders on iron ore pellets. This is a challenging problem because iron ore pellets are a complex product of an agglomeration process which is typically controlled only to the extent that is necessary to form a quality product for ironmaking. This work identifies the …

    mtu Repository record for UNDERSTANDING STRENGTH OF DRIED IRON ORE PELLETS (opens in a new tab)

  9. Dysprosium transport in Nd-Fe-B pellets

    … length of Dy sources in Nd2.7Fe14B1.4 layered pellets and melt spun ribbons were obtained from the calculation of Fick's second law combined with EDS results from the experiment. The results indicate that the effective diffusion coefficient of Dy in the layered pellets is higher than the …

    mtu Repository record for Dysprosium transport in Nd-Fe-B pellets (opens in a new tab)

  10. Propriedades de pellets: biomassas, aditivos e tratamento térmico

    O desenvolvimento da produção de pellets no Brasil é promissor devido ao crescente consumo mundial de pellets. Contudo, há poucos estudos sobre peletização no país. O Artigo I teve como objetivo avaliar as propriedades da matéria-prima e de pellets produzidos com diferentes biomassas brasileiras. …

    brazil-ufv Repository record for Propriedades de pellets: biomassas, aditivos e tratamento térmico (opens in a new tab)

  11. Wood pellets combustion in a fixed bed combustor

    … through densification in the form of wood pellets. The combustion behavior of pine wood pellets was investigated in this study. The decomposition of wood particles under different heating and air flow rates were analyzed using the TGA device. The wood pellets burning in a small scale …

    minho-thes Repository record for Wood pellets combustion in a fixed bed combustor (opens in a new tab)

  12. Polarimetric Measurements of Ice Pellets and Aggregated Snow

    … data usage for discrimination between the ice pellets and freezing rain if their occurrence is away from the radar (patchy, no radar-centric structure), and more importantly the development of the polarimetric relations for snow quantification. Observations and analysis of an ice-liquid phase …

    oklahoma-thes Repository record for Polarimetric Measurements of Ice Pellets and Aggregated Snow (opens in a new tab) Restricted access

  13. Advances in Alternative Binders for Iron Ore Pellets

    … replacement of bentonite with starch yields pellets of sufficient quality for industrial use. Starch can be used as a direct replacement for bentonite; however, starch is significantly more expensive making direct xxi replacement cost prohibitive. Partial replacement of bentonite with 1 …

    mtu Repository record for Advances in Alternative Binders for Iron Ore Pellets (opens in a new tab)

  14. Mechanical behavior of biomass pellets during gasification, The

    Includes bibliographical references.

    colo-mines Repository record for Mechanical behavior of biomass pellets during gasification, The (opens in a new tab)

  15. Understanding pellet-filler interactions in compression of coated pellets

    … lactose. Irrespective of the filler type, coated pellets were found to undergo three phases of coat damage with two transition points over a range of compression pressure. There was minimal coat damage at the initial particle rearrangement phase. This was followed by an attritive phase where the …

    nus Repository record for Understanding pellet-filler interactions in compression of coated pellets (opens in a new tab) Download file for Understanding pellet-filler interactions in compression of coated pellets (opens in a new tab)

  16. Hydrothermal pretreatments to make durable pellets from herbaceous biomass

    … ash content are impediments to produce durable pellets from herbaceous biomass feedstocks. This research aimed at improving the durability of agri-pellets using mild hydrothermal treatment of biomass prior to pelletization. Different ways of steam generation were explored at a mild-to-high …

    ubc Repository record for Hydrothermal pretreatments to make durable pellets from herbaceous biomass (opens in a new tab) Download PDF for Hydrothermal pretreatments to make durable pellets from herbaceous biomass (opens in a new tab)

  17. Steam explosion of biomass to produce durable wood pellets

    … explosion during handling or self-heating of pellets in storage. The present study investigates the use of steam explosion pretreatment to improve the pellet durability in terms of mechanical strength and moisture sorption resistance. In this research, a batch steam explosion unit consisting …

    ubc Repository record for Steam explosion of biomass to produce durable wood pellets (opens in a new tab) Download PDF for Steam explosion of biomass to produce durable wood pellets (opens in a new tab)

  18. Permeability of bulk wood pellets with respect to airflow

    Data on the resistance of wood pellets to air flow are required for the design and control of ventilation and drying of bulk pellets in storage. In this study, pressure drops versus air flows were measured for several sizes of wood pellets, with diameter of 6 mm and lengths varying from 4 to 34 mm. …

    ubc Repository record for Permeability of bulk wood pellets with respect to airflow (opens in a new tab) Download PDF for Permeability of bulk wood pellets with respect to airflow (opens in a new tab)

Page 1 of 93