Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Pendulum Test"”.

  1. Analyzing laboratory skid resistance test using finite element modeling

    … research examines the performance of the British pendulum tester which is widely used to measure skid resistance of pavement surfaces. A finite element model was developed to simulate the British pendulum test and offers a useful tool to analyze the behavior of the device as well as to address the …

    nus Repository record for Analyzing laboratory skid resistance test using finite element modeling (opens in a new tab) Download file for Analyzing laboratory skid resistance test using finite element modeling (opens in a new tab)

  2. Evaluation of tSCS treatment for the alleviation of lower limb spasticity

    … scale, clonus beet quantification, 10-m walking test (if possible) and electrophysiological evaluation (Brain Motor Control Assessment, BMCA) supplemented by the Wartenberg pendulum test. Results: The results of the pendulum test show increase in muscle tone in four subjects while the others …

    reykjavik Repository record for Evaluation of tSCS treatment for the alleviation of lower limb spasticity (opens in a new tab)

  3. Scale-up and operations of a vertical stirred mill

    … conducted to compare the batch recycle and the pendulum testing procedures. A scale-up demonstration study was also done utilizing the pilot-scale (VXP10) mill and the full-scale (VXP2500) mill to validate the procedure. The following are the main findings from this work: There is an optimum tip …

    ubc Repository record for Scale-up and operations of a vertical stirred mill (opens in a new tab) Download PDF for Scale-up and operations of a vertical stirred mill (opens in a new tab)

  4. Design and characterization of a printed spacecraft cold gas thruster for attitude control

    … gas units was characterized using a ballistic pendulum test stand within a microtorr vacuum chamber. A heating element was used to change the temperature conditions of the propellant and determine the relationship between temperature and performance. The flight units were delivered in January …

    texas Repository record for Design and characterization of a printed spacecraft cold gas thruster for attitude control (opens in a new tab)

  5. Reliability of Clinical Evaluators of Spasticity in Patients with Stroke

    … clinical evaluators of spasticity (i.e., the pendulum test, the patellar tendon tap test (PTT), and the Modified Ashworth scale) in their reliability to assess spasticity in people post-stroke. It was hypothesized that the use of force movement sensors along with surface electromyography …

    cuny-grad Repository record for Reliability of Clinical Evaluators of Spasticity in Patients with Stroke (opens in a new tab)

  6. Development and Implementation of a Flight Test Program for a Geometrically Scaled Joined Wing SensorCraft Remotely Piloted Vehicle

    The development and implementation of a flight test program for an unmanned aircraft is a multidisciplinary challenge. This thesis presents the development and implementation of a rigorous test program for the flight test of a Geometrically Scaled Joined Wing SensorCraft Remotely Piloted Vehicle …

    vt Repository record for Development and Implementation of a Flight Test Program for a Geometrically Scaled Joined Wing SensorCraft Remotely Piloted Vehicle (opens in a new tab)

  7. A torsion pendulum ground test of the LISA Pathfinder Free-fall mode

    … be actively compensated in order to hold the test particles centred inside an orbiting apparatus. The actuation force applied to compensate this effect introduces a dominant source of force noise in the mission noise budget. To suppress this noise source and avoid actuation instabilities, a …

    trento Repository record for A torsion pendulum ground test of the LISA Pathfinder Free-fall mode (opens in a new tab)

  8. Inertial Sensor Characterization for Inertial Navigation and Human Motion Tracking Applications

    … DM3-GX3 inertial sensor was also investigated. A pendulum test apparatus from a previous work was used to test the MTx and GX3. An encoder is installed to the pendulum axis of rotation and provides the reference data needed to calculate the dynamic accuracy of the MTx and GX3. After a series of …

    nps Repository record for Inertial Sensor Characterization for Inertial Navigation and Human Motion Tracking Applications (opens in a new tab)

  9. Modeling and model identification of autonomous underwater vehicles

    … An experimental setup, based on a quadrifilar pendulum, is developed to measure the moments of inertia of the vehicle. System identification techniques, based on Recursive Least Squares estimation with modifications for learning the parameters of dynamic systems, are applied in two approaches …

    nps Repository record for Modeling and model identification of autonomous underwater vehicles (opens in a new tab)

  10. Ultra High-Performance Concrete As a High Friction Surface Treatment for Pavements and Bridges

    … Los Angeles Abrasion and Micro-Deval Abrasion tests, and studied the surface texture utilizing a high-resolution laser scanner and friction utilizing the British Pendulum Test. This study also assessed the performance of non-proprietary Ultra High-Performance Concrete (UHPC) for use as an …

    clemson Repository record for Ultra High-Performance Concrete As a High Friction Surface Treatment for Pavements and Bridges (opens in a new tab)

  11. Predicting friction with improved texture characterization

    … were collected around Texas using different tests methods. The friction characterization tests included the British Pendulum test (BPT), the Dynamic Friction test (DFT), and the Micro GripTester. Thirty-six different pavement sections were evaluated, including different surface types such as …

    texas Repository record for Predicting friction with improved texture characterization (opens in a new tab)

  12. Simulation of soil-to-tool interaction using Discrete Element Method (DEM) and Multibody Dynamics (MBD) coupling

    … in the MBD simulation workflow. Two laboratory tests were used to capture the bulk material behavior: the angle of repose test for calibration of coefficients of static friction and rolling friction, and the cone penetrometer test to calibrate the soil shear modulus and normal and shear …

    iastate Repository record for Simulation of soil-to-tool interaction using Discrete Element Method (DEM) and Multibody Dynamics (MBD) coupling (opens in a new tab)

  13. Accuracy and reliability of single camera measurements of ankle clonus and quadriceps hyperreflexia

    … and mobility tasks. The ankle clonus drop test, which measures the plantar flexor reflex threshold angle (PFRTA), and the pendulum test, which measures the quadriceps reflex threshold angle (QRTA), provide valid and reproducible measurements of ankle clonus and quadriceps hyperreflexia. …

    texas Repository record for Accuracy and reliability of single camera measurements of ankle clonus and quadriceps hyperreflexia (opens in a new tab)

  14. Finite Element Modeling of Occupant Injury Risk and Crash Performance of W-Beam Guardrail Barriers in Roadside Crashes

    … results were validated against full scale crash tests of pickup trucks and passenger cars impacting w-beam guardrail barriers. The maximum dynamic deflection of the guardrail, exit velocity and angle of the vehicle, and occupant injury risk were calculated and compared to the tests. Kinematics of …

    vt Repository record for Finite Element Modeling of Occupant Injury Risk and Crash Performance of W-Beam Guardrail Barriers in Roadside Crashes (opens in a new tab)

  15. A Low-Cost Unmanned Aerial Vehicle Research Platform: Development, Modeling and Advanced Control Implementation

    … aerodynamic parameters from flight test data. The moments of inertia of the platform are determined using the simple pendulum test method, and the frequency response of each servomotor is also obtained experimentally. The Javaprop applet is used to obtain lookup tables relating …

    vt Repository record for A Low-Cost Unmanned Aerial Vehicle Research Platform: Development, Modeling and Advanced Control Implementation (opens in a new tab)

  16. Experimental and Theoretical Studies of Friction and Adhesion of Elastomeric Materials

    … elastomers is evaluated. A custom-built pendulum test setup was used to perform the friction test in dynamic conditions. Two substantially different responses with respect to the change in normal force were observed and the role of different contributions to the frictional response of …

    vt Repository record for Experimental and Theoretical Studies of Friction and Adhesion of Elastomeric Materials (opens in a new tab)

  17. Torsion Pendulum Testing of the LISA Charge Management System

    … acting on the otherwise free-falling test masses. Among the stray forces relevant to the LISA noise budget, we find the ones that arise from the electrostatic interaction between the test masses and the surrounding capacitive sensor. Most of such electrostatic forces scale with the …

    trento Repository record for Torsion Pendulum Testing of the LISA Charge Management System (opens in a new tab)