Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"Penetrators"”.
-
Impact dynamics of tool steel penetrators
… The most efficient AP ammunition is built with penetrators made from either tungsten alloys or depleted uranium, but alloy steel penetrators are also commonly used, because they are less expensive and less polluting, even if they are much less efficient. The impact deformation and fracture …
-
Planetary Penetrators for Sample Return Missions
University of Washington Abstract Planetary Penetrators for Sample Return Missions Chad A. Truitt Chair of the Supervisory Committee: Professor Robert M. Winglee Earth and Space Sciences Sample return missions offer a greater science yield when compared to missions that only employ in situ …
-
Computer studies of aircraft fuel tank response to ballistic penetrators.
A major goal of the hydraulic ram survivability program for aircraft fuel tanks is the development of an economical computer code which accurately predicts the pressure in the fluid, the response of the tank walls, and the crack damage to the tank due to a ballistic projectile. This study compares …
-
Investigation of textile resistance to puncture by micro-penetrators with geometry of mosquito proboscis
… for mechanical puncture by large-diameter penetrators such as knives and needles, but there are no standardized tests for micro-penetrators (i.e. mosquito proboscis). This study developed an enhanced micro-penetrator puncture test (micro-PPT), which is a quasi-static puncture technique that …
-
A study of the crack damage in fuel-filled tank walls due to ballistic penetrators.
A major goal of the hydraulic ram survivability program for aircraft fuel tanks is the development of analytical-numerical tools for the accurate prediction of damage to the tank due to a ballistic projectile. This report presents a method for predicting the amount of cracking of a penetrated tank …
-
Quantifying the forces in stabbing incidents
… blades and too high forces were predicted. Blunt penetrators were also tested both by experiments and computationally. By refining the constitutive model for skin computed values were obtained in reasonable agreement with the experiments for blunt penetrators. Mesh dependency was minimal in the …
-
Biogeochemical controls on the corrosion and fate of depleted uranium
… nuclear fuel industry and is used in antitank penetrators due to its high density, self-sharpening and pyrophoric properties. Military activities have left a legacy of DU waste in terrestrial and marine environments and presently there are no clean up procedures in place. In order to understand …
-
Quantitative Analysis of Inorganic Chemical Species on an Impact-Penetrator Module
… lower cost payloads like impactors and penetrators are innovative ways to address these issues. The Ice Shell Impact-Penetrator (IceShIP) is a penetrator science payload under development since 2015. Icy Moon Penetrator Organic Analyzer (IMPOA), is a sub payload of IceShIP, and is a …
-
Quantitative Analysis of Inorganic Chemical Species on an Impact-Penetrator Module
… lower cost payloads like impactors and penetrators are innovative ways to address these issues. The Ice Shell Impact-Penetrator (IceShIP) is a penetrator science payload under development since 2015. Icy Moon Penetrator Organic Analyzer (IMPOA), is a sub payload of IceShIP, and is a …
-
Cratering Characteristics of the Europa Kinetic Ice Penetrator
… was conducted. With low impact velocities, penetrators consistently had deeper, narrower craters than natural impactors (rocks), and showed less radial and sub-impactor compression. This, and future crater data into harder substrates, will create a cratering hardness curve for this design …
-
An analytical high value target acquisition model
… area defense. In addition, the fall of multiple penetrators is modeled using a conditional multinomial probability distribution. the model's equations are used to solve for an optimal missiles seeker range gate, given a probability distribution describing the location of the HVT within the …
-
The dynamic failure behavior of tungsten heavy alloys subjected to transverse loads
… used in defense applications as kinetic energy penetrators, have been studied for many years. Even so, their dynamic failure behavior is not fully understood and cannot be predicted by numerical models presently in use. In this experimental investigation, a comprehensive understanding of the …
-
Establishing uranium migration parameters for the Indian Springs Range
… 24 years, depleted uranium (DU) kinetic energy penetrators used by the US Air Force have been tested and evaluated to develop targeting system algorithms at a site in the Mojave Desert. This two-fold study focused on reducing uncertainties in the environmental parameters used to model DU …
-
Powder Processing and Characterization of W-3Ni-1Fe Tungsten Heavy Alloy
… material for depleted uranium in kinetic energy penetrators. Milling time and sintering temperature were varied from 15 to 100 hours and 1000 to 1300°C respectively. Particle size analysis and SEM showed a bimodal particle size distribution with most of the particles below 10 µm in size. XRD peak …
-
A study of the quasi-frictional forces resulting on serrated clamping elements
… penetrator will be applicable to an array of penetrators as on a serrated clamping element. Mathematical considerations show that a vertical penetrator load is held in equilibrium by the vertical components of the yield pressure which act on the penetrator surfaces. This is mathematically …
-
Quasi-static tearing tests of metal plating
… damage due to grounding and ballistic penetrators. In this case, the deformation of the clamped plate is modeled in two stages: (1) dishing, which leads to disking and (2) radial crack propagation, which results in petalling. In the first stage, a thin geometrically-scaled (0.90 mm, …
-
Synthesis and Properties of Nanocrystalline Tungsten Heavy Alloy Powders Consolidated by Pulsed Electric Current Sintering
… are required, such as for kinetic energy penetrators (KEPs). Using a bottom-up approach to produce a tungsten heavy alloy (WHA), W-based alloys, including W-Mo-Fe and W-Cr-Fe, have been produced using high-energy ball milling and consolidated with pulsed electric current sintering (PECS). …
-
Equal Channel Angular Extrusion of Tungsten Heavy Alloy
… ranging from weights to kinetic energy penetrators. The goal of this thesis was to impart maximum strain to the tungsten heavy alloy via equal channel angular extrusion (ECAE), and evaluate the variation in tungsten particle morphology with level of plastic strain. Severe plastic …
-
Taylor Impact Test and Penetration of Reinforced Concrete Targets by Cylindrical Composite Rods
… end increased by at least 20%. For steel penetrators, the damage experienced increased as the nose shape got blunter and the angle of obliquity became larger whereas the damage induced to the target only increased with penetrator bluntness.
-
Investigating detonation fronts in small explosive charges using a wave shaper
… metal pushing power in explosively formed penetrators (EFPs). While there are many complicated ways to generate a convergent front in an explosive, using inert wave shaper (also called an attenuator) is a simple solution. Wave shapers have been used for decades in shaped charge applications …
Page 1 of 2