Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Phase change model"”.

  1. Assessment of multiphase boiling models: For modelling of heat and mass transfer in an aero engine steam vaporizer tube

    … companies investigating the use of heat exchanger technology to reduce specific fuel consumption (SFC) and enhance thermal efficiency. Multiphase boiling models enable the analysis of flow behaviour and performance of heat exchanger systems, including mass, momentum, and heat transfer. This …

    chalmers Repository record for Assessment of multiphase boiling models: For modelling of heat and mass transfer in an aero engine steam vaporizer tube (opens in a new tab)

  2. Numerical Modeling of the Metal Cutting Process in the Plasma Arc Cutting

    … numerical simulation using a plasma model combined with a melting process model is conducted and results are discussed, leading to a better understanding of the physical phenomena within the kerf region of a commercial plasma arc cutting tool. The modeling includes three different …

    umn Repository record for Numerical Modeling of the Metal Cutting Process in the Plasma Arc Cutting (opens in a new tab)

  3. Modeling of an experimental updraft countercurrent moving bed biomass gasifier

    A steady-state model of a countercurrent, updraft, biomass gasifier was developed and verified against pilot-plant data. The gasifier was modeled in two parts: a combustion-fasification (CG) and a pyroiysis model. Development of the CG model demonstrated that the combustion reaction was mass …

    ttu Repository record for Modeling of an experimental updraft countercurrent moving bed biomass gasifier (opens in a new tab)

  4. A Comprehensive Study of Phase Change Materials (PCMs) for Building Walls Applications

    … PCMs, are introduced. A modified phase change model, for a paraffin-based PCM, was developed. With the validated model, the performance of the PCM-enhanced wall in several U.S. climate zones was studied. The PCM-enhanced wall could lower the peak cooling load through the walls by …

    ku Repository record for A Comprehensive Study of Phase Change Materials (PCMs) for Building Walls Applications (opens in a new tab)

  5. A Comprehensive Study of Phase Change Materials (PCMs) for Building Walls Applications

    … PCMs, are introduced. A modified phase change model, for a paraffin-based PCM, was developed. With the validated model, the performance of the PCM-enhanced wall in several U.S. climate zones was studied. The PCM-enhanced wall could lower the peak cooling load through the walls by …

    ku Repository record for A Comprehensive Study of Phase Change Materials (PCMs) for Building Walls Applications (opens in a new tab)

  6. Numerical Simulation of a Laser-Induced Vapour Bubble

    … dy- namics. Emphasis is put on thermal and phase-change phenomena. An interface phase- change model, incorporating both evaporation and condensation, is developed and imple- mented into ANSYS Fluent through user-de ned functions. The implemented model is able to produce qualitatively …

    chalmers Repository record for Numerical Simulation of a Laser-Induced Vapour Bubble (opens in a new tab)

  7. Numerical modelling of heat transfer and evaporation characteristics of cryogenic liquid propellant

    … and condensation), which are inputs for kinetic modeling of phase change. A novel, combined experimental and computational approach is being used to determine the accommodation coefficients for liquid hydrogen. The experimental effort utilizes the Neutron Imaging Facility located at the National …

    washington Repository record for Numerical modelling of heat transfer and evaporation characteristics of cryogenic liquid propellant (opens in a new tab)

  8. Residual stress modeling of PBF-LB

    This thesis investigates the modeling of residual stress in laser powder bed fusion (PBF-LB) processes using AdditiveLab as a meso-scale simulation tool. The study aims to evaluate AdditiveLab as a process simulations tool for PBF-LB by repli cating experimentally verified simulations, specifically …

    chalmers Repository record for Residual stress modeling of PBF-LB (opens in a new tab)

  9. A Light-weight Multiphase CFD Configuration for Liquid Hydrogen Flash Boiling

    … and provided a bubble nucleation based 3 stage phase change model. Kangwanpongpan et al. [2] proposed an alternative CFD model with better fit to experimental result, based on volume of fraction (VOF) and large eddy simulations (LES). Based on these results, this paper proposed a lightweight …

    unsw Repository record for A Light-weight Multiphase CFD Configuration for Liquid Hydrogen Flash Boiling (opens in a new tab)

  10. Modeling of Heat Transfer and Flow Patterns in a Porous Wick of a Mechanically Pumped Loop Heat Pipe: Parametric Study Using ANSYS Fluent

    … for spacecrafts is a mechanically pumped single phase cooling loop that are not enough to meet thermal-related challenges for future space missions. Loop heat pipes (LHP) are the solution for the required thermal management system that is compact, light-weight, reliable, precise, and energy …

    unr Repository record for Modeling of Heat Transfer and Flow Patterns in a Porous Wick of a Mechanically Pumped Loop Heat Pipe: Parametric Study Using ANSYS Fluent (opens in a new tab)

  11. Two-Phase Forced Convection Heat Transfer In Triple-Concentric Tube Heat Exchangers

    Heat exchangers are vital devices and are used in many specific applications such as air conditioning, power production, and waste heat recovery. Throughout the year, a large amount of energy is wasted in air conditioning and refrigeration systems in residential and commercial sectors. At the same …

    uab Repository record for Two-Phase Forced Convection Heat Transfer In Triple-Concentric Tube Heat Exchangers (opens in a new tab)

  12. Tuning Effect on Thermal Radiative Emission of Thermo-Mechano-Optical Gratings and Multilayers

    … for metals, dielectrics, 2D materials, and phase transition materials. Graphene has a unique electrical conductivity profile which have metallic nature depending on the frequency, but also has a negative thermal expansion coefficient that makes graphene unique. Hence, graphene creates …

    unt Repository record for Tuning Effect on Thermal Radiative Emission of Thermo-Mechano-Optical Gratings and Multilayers (opens in a new tab)

  13. Computational modeling and experimental validation of single phase and boiling flows in microgap cooling layers

    … A contribution is made in the single and two-phase modeling by proposing an approach that is capable of accurately predicting the fully-resolved temperature and flow fields across the entire cooling layer and capturing non-trivial aspects such as hotspot cooling. The physics of flow boiling in …

    gatech Repository record for Computational modeling and experimental validation of single phase and boiling flows in microgap cooling layers (opens in a new tab)

  14. Study of supersonic nozzle flows in low-pressure environments: starting jets and lunar plume-surface interactions

    … difference). Available numerical techniques for modelling regolith entrainment and subsequent movement suffer from limited accessibility and different levels of sophistication. In this thesis, a design for an open-ended shock tube connected to a vacuum chamber is presented. This is used to …

    glasgow Repository record for Study of supersonic nozzle flows in low-pressure environments: starting jets and lunar plume-surface interactions (opens in a new tab) Download PDF for Study of supersonic nozzle flows in low-pressure environments: starting jets and lunar plume-surface interactions (opens in a new tab)

  15. Development and Application of Solid-Liquid Lattice Boltzmann Model for Phase Change Material in Heat Exchanger

    Phase change materials (PCMs) are widely used in thermal energy storage systems, as they can absorb and release a large amount of heat during the phase change process. Numerical simulations can be used for parametric studies and analysis of the thermal performance of the PCM heat exchanger (HX) to …

    maryland Repository record for Development and Application of Solid-Liquid Lattice Boltzmann Model for Phase Change Material in Heat Exchanger (opens in a new tab)

  16. Tectonic subsidence analysis of the Williston Basin

    … were calculated to evaluate episodic subsidence models and extrapolated across unconformities to evaluate continuous subsidence models. Extrapolated tectonic subsidence curves near the center of the basin display a relatively constant subsidence through the Paleozoic, at a rate of slightly less …

    sask Repository record for Tectonic subsidence analysis of the Williston Basin (opens in a new tab)

  17. Laser-based hybrid process for machining hardened steels

    … of hyper-eutectoid 52100 hardened steel, (b) model the laser tempering process to determine the resulting hardness, and (c) conduct machining experiments to evaluate the performance of the laser tempering based hybrid turning process in terms of forces, tools wear and surface finish. First, …

    gatech Repository record for Laser-based hybrid process for machining hardened steels (opens in a new tab)

  18. Ice crystal icing in gas turbine engines

    … validation of a new comprehensive computational model to aid prediction of ice crystal icing in turbofan compressors. The Ice Crystal Icing ComputationaL Environment (ICICLE) delivers a step change in modelling of the phenomenon compared to the first generation of models in the open literature. …

    oxford Repository record for Ice crystal icing in gas turbine engines (opens in a new tab)

  19. Thermal and hydrodynamic characterization of two-phase flow in microchannels

    Two-phase flows in microchannels are central to numerous high-performance thermal management applications, yet critical gaps persist in the fundamental understanding of liquid film dynamics, phase change prediction, and energy harvesting from oscillatory two-phase systems. This dissertation …

    iastate Repository record for Thermal and hydrodynamic characterization of two-phase flow in microchannels (opens in a new tab)

  20. Reproducible fluid structure interaction for complex flows in engineered systems

    … focuses on the application of numerical models to study Fluid Structure Interaction (FSI) in the industrial context. The emphasis is on a series of case studies belonging to practical applications in design and manufacturing and that are solved by a synergistic use of theoretical and …

    njit Repository record for Reproducible fluid structure interaction for complex flows in engineered systems (opens in a new tab)

Page 1 of 2