Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 45 for “"Phase changing"”.
-
Multiphase Transport In Deformable Phase-Changing Porous Materials
… food process is just single- or multi-phase transport in rigid or deformable porous media, with or without phase transitions. As porous media transport is widely studied across application areas, some of the physics can be borrowed from other materials (mainly, soils, wood and …
-
Incorporation of phase changing materials (PCMs) with solar cells
The increased use and scale of solar Photo-voltaic (PV) systems area increasing in the world and so are the global temperatures. As PV cells are heated, the cells lose efficiency due to a decrease in energy bandgap. Passive cooling using PCMs may counteract this effect and improve the PVs …
-
Carbon dioxide capture using phase changing solvents - A comparison with state-of-the-art MEA technologies
… one possible way to do this is to use so-called phase changing solvents. This new family of molecules are amines that in the presence of water and CO2 exhibit a triple phase vapour-liquid-liquid equilibrium. The liquid mixture separates into two liquid phases where one has a high CO2 and amine …
-
Accurate measurement of the thermal conductivity of phase changing materials (PCM) in the solid and liquid phase
… employing a new category of materials known as Phase Changing Materials (PCMs). In the following chapters, the motivation for this work, the selected technique and materials, and the experimental setup and procedure are outlined. Moreover, the challenges faced, the results achieved, and the …
-
Correlation Between Asphalt Binder’s Phase-Changing Properties and Performance Grade in Response to Different Modifiers at High and Intermediate Temperature
… the impact of different modifiers on the phase-changing properties and performance grade of asphalt binders at high and intermediate temperatures. The primary focus is on understanding how phase-changing materials (PCMs) like Styrene-Butadiene-Styrene (SBS), Lignin, and Ground Tire Rubber …
-
Life cycle assessment of phase-change solvents for post-combustion CO2 capture
… solvent. In the ROLINCAP project, several phase-changing solvents are under investigation. By using a phase-changing solvent, the energy requirement of the CO2 capture has been proven to decrease. However, while a lot of research is focused on finding new and improved solvents, the …
-
Optothermal manipulation : theoretical and experimental advances in liquid and solid environments
… of smaller entities by embedding them on a phase-changing pseudo-solid surfactant layer to demonstrate their rotation around the laser beam. Finally, we present the optothermal manipulation of diverse micro and nanoparticles in 3D by embedding them in a phase-changing surfactant bilayer …
-
Amorphous-Crystal Phase Transitions in Ge2Sb2Te5 and GexTe1-x alloys
Aim of this work was the investigation of the phase transitions in Ge2Sb2Te5 and GexTe1-x thin films. These alloys are of interest since they exhibit an excellent combination of electrical-optical and phase changing characteristics for memory applications. In particular we have focused our …
-
Fractional Recovery of Minerals from Waste Brines by Utilizing Metastable Solution Kinetic Behaviours
… be possible by investigating the non-equilibrium phase behaviour and phase changing kinetics in multi-ion saline systems which cannot be predicted from widely reported phase boundaries. The overall objective of this thesis was therefore to further the knowledge of the linkage between precipitation …
-
Polymer Microchips for Capillary Electrophoresis and Electric Field Gradient Focusing of Biomolecules
… with improved separation performance, phase-changing sacrificial materials were developed for solvent bonding of polymer microchips. Devices were fabricated by filling channels in embossed PMMA with a heated liquid that formed a solid sacrificial layer at room temperature. The …
-
Modelling the feeding process for aluminium production
… we formulate a one-dimensional model for the phase-changing infiltration into a porous alumina raft placed on top of the cryolite. We simplify our model in the limit of small superheat. We solve the equations using the same approach as in Chapter 2 with the method of lines, using the …
-
Fluid-Structure Interaction Loading of an Axially Rupturing Carbon Dioxide Pipeline
… the fluid-structure interaction between phase-changing CO2 and a rupturing pipeline. For the first time, shock tube simulations with user-defined EOS and thermodynamic subroutines for non-ideal gases were developed and implemented within the Abaqus finite element software. …
-
Aircraft Landing Gear Thermo-tribomechanical Model Development
… the transient process of heat generation in a phase-changing grease-lubricated lower bearing is fundamentally understood. A novel tribotopological lubrication theory is derived in order to take into account all distinct physical phases of the non-Newtonian Bingham lubricant. The governing …
-
Design and Simulation of Passive Thermal Management System for Lithium-Ion Battery Packs on an Unmanned Ground Vehicle
… expanded graphite matrix infiltrated with a phase-changing paraffin wax. The redesigned battery pack was similarly modeled, showing a decrease in the maximum temperature to 50.3 °C after 630 seconds at the same power draw. The proposed passive thermal management system kept the batteries …
-
GPU Based Real-time Welding Simulation with Smoothed-Particle Hydrodynamics
… to simulate fluid as well as heat transfer and phase changing. In order to accelerate the processing to reach the level of real-time, we adopt CUDA to implement the SPH solver on GPU. Plus, Leap Motion is utilized as the input device to control the welding gun. As the result, the simulation …
-
Design and Optimization of Phase-Change Metasurfaces for Infrared Energy and Biosensing Applications
… of metasurfaces can then be achieved by using phase-changing materials. This type of materials can attain different optical properties by applying external stimulus such as heat, electric current, or laser pulses. The change in the optical properties would be beneficial for applications …
-
Coagulation and Redispersion of CO2-Switchable Polymer Latexes of Low Glass Transition Temperatures
… (HCl) to promote its partitioning into the water phase. Changing the MMA/BA fraction gave control over the resulting glass transition temperature of the particles. Following polymerization, the particles from the resulting latexes could be effectively coagulated be adding a small amount of caustic …
-
Heat Transfer During Melting and Solidification in Heterogeneous Materials
… conductance. The matrix is not allowed to change phase and energy is either generated inside the matrix or transferred from the boundaries, which is initially conducted through the matrix material. The physical model of this coupled, two-step heat transfer process is solved using the energy …
-
The Effect Of Intermittent Cooling On Simulated Basketball Game Performance
… 5-minutes to the lower extremity using either a phase changing material (PCM), wetted ice (WI) or received no treatment (control). Change in countermovement jump height (ΔCMJ), 10m sprint time (ΔST), heart rate (ΔHR), ratings of perceived exertion (RPE) and perceived recovery score (PRS) were …
-
Pickering Emulsions and Phase Change Slurries for Renewable Technologies
… The first study (Chapter 3) investigates phase change slurries (PCS) in geothermal systems, focusing on the impact of mineral contaminants present in real systems on stability, noting distinct behaviours such as flocculation in formulations with clay contaminants. Next, paraffin-based …
Page 1 of 3