Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 48 for “"Photoacid generator"”.
-
Visible Light Photoacid Generator Catalyzed Michael Additions & In-situ Photoredox Generated Carbocation Catalysis
… in many natural and chemical processes, and photoacids that undergo proton dissociation or generation upon photoirradiation can be beneficial for use in acid-sensitive reactions. This work describes the use of photoacid generators (PAGs) as tools for organic synthesis, generating strong acids …
-
Free radical graft polymerization lithography and modeling base quenchers in photoresists
… of monomers and initiators. There are very few photoacid generators strong enough to initiate cationic polymerization. Also, the amount of photoacid generator that can be added to a polymer film is limited by its solubility in the film. Furthermore, only vinyl ethers and epoxides have been found …
-
Radiation-triggered Depolymerization of Poly(Aldehyde) for Phase Change, Payload Release, and Dry-develop Lithography
… under vacuum. In thick PPA films containing photoacid generators, ultraviolet and x-ray irradiation produced dose-dependent depolymerization and solid-to-liquid phase change. Liquification was governed not only by conversion, but also by post-exposure time, irradiation intensity, and …
-
Acid Transport in Chemically Amplified Photoresists
… a glassy polymer resin (reactant) loaded with a photoacid generator (inactive catalyst). Patterns are formed by locally activating a strong acid catalyst with light, and then heating the film to promote catalyst diffusion coupled to polymer deprotection. While CARs have been studied for more than …
-
Photoinitiated transformation of nanocrystal superlattice polymorphs assembled at a fluid interface
… process can be triggered by the activation of a photoacid generator, Ph2I-pyranine. The altered surface chemistry of the quantum dots allows for positive or negative pattern generation using quantum dots assemblies down to monolayer thickness. We show that the film structure can be tuned between …
-
Solid State Chemical Recycling of Polymer by Variable Frequency Microwave
… depolymerization with the combination of a photoacid generator and microwave-absorbing additive resulted in a reduction of total microwave energy required. This study demonstrates the use of VFM systems for chemical recycling and monomer recovery of select polymer matrices.
-
Novel resist materials for next generation lithography
… resist has been developed via the addition of a photoacid generator and a crosslinker to a fullerene derivative. This thesis work presents a significant extension of the previous work. The resists have undergone comprehensive optimisation, and systematic characterisation of electron beam …
-
Improvements for chip-chip interconnects and MEMS packaging through MEMS materials and processing research
… formation between Cu(I) and iodonium of the photoacid generator (PAG), leading to hindrance of acid formation by PAG and restriction of acid-catalyzed decomposition of PPC.
-
Characterization of Substituted Polynorbornenes for Advanced Lithography
… resist additives were studied. For all tested photoacid generators, it was found that some interchain hydrogen bonding occurred between resist additive molecules and HFA side groups, which retarded the dissolution rate in the formulated material. In particular, one can create a simple resist …
-
Engineered porous structures for propellants using additive manufacturing
… foaming method. The proposed method is to use a photoacid generator (PAG) that relies on photosensitization of diaryliodonium salts via photoredox induced fragmentation mechanism to decompose calcium carbonate (CaCO<sub>3</sub>) at a given wavelength during printing. This work will review the …
-
UV-triggered Transient Electrospun Fiber Mats from Poly(Propylene Carbonate)/Poly(Phthalaldehyde) Polymer Blends
… transient electronic devices. The addition of a photoacid-generator (PAG) to the system working in combination with UV light provides an acid source to enhance degradation since both polymer backbones are acid-sensitive. Electrospinning enables the production of PPC/cPPA composite nanofiber mats …
-
Φωτοευαίσθητα πολυμερικά υλικά μηχανισμού χημικής ενίσχυσης για κατασκευή μικροσυστημάτων
… polymers, whose solubility with the help of a photoacid generator (production of protonic acid when exposed to a suitable wavelength) changes in specific solvents after their exposure. By modifying the photoacid generator, it is possible to select the desired exposure area. At the same time, …
-
Advances in cationic graft polymerization lithography
… an inert transfer layer spin-coated with photoacid generator onto a substrate and exposed in selected areas to UV radiation. After irradiation, vapor-phase reaction between photo-generated acid and a silicon-containing monomer occurs in the exposed areas, resulting in a grafted polymer …
-
Πολυμερικά υλικά κατάλληλα για λιθογραφία μέσω φωτοκαθοδηγούμενων διεργασιών (top-down) και μέσω αυτο-οργάνωσης (bottom-up)
… qPDMAEMA-b-PTHPMA copolymers in the presence of photoacid generator were developed via spin coating of copolymers solution on neutralized silicon substrates. A few regions of the films were exposed to 254 nm through a mask, causing the acidic hydrolysis of PTHPMA block. The smallest created …
-
Development of a dispensing based additive manufacturing technique for the creation of alginate bone scaffolds
… of sodium alginate, calcium carbonate and a photoacid generator. This ink was able to react when exposed to Ultraviolet (UV) light to partially gel, as required between layers in the DBAM process. Studies were conducted to find the ideal concentrations of the components of the ink. The …
-
Development and applications of acid degradable polymeric materials
… solvent. We demonstrate that by encapsulating a photoacid generator as a trigger, we can increase the internal local acid concentration and degrade these microcapsules using UV light (365 nm). The generation of high localized proton concentration inside the oil core is capable of degrading the …
-
The Development of Photoinduced Initiation of Olefin Polymerization and its Applications
… polymerization of ethylene. To do this we used a photoacid generator (PAG) or PAG/photosensitizer system in tandem with an olefin polymerization precatalyst. In addition, we showed that both temporal and spatial resolution can be achieved through this polymerization method. Following the …
-
APPLIED PHOTOCHEMISTRY FOR MULTICOLOR PHOTOLITHOGRAPHY
… 4-methylbenzenesulfonate, a multicolor photoacid generator (PAG). When irradiated with 355 nm light, this PAG releases p-toluenesulfonic acid which can be used to initiate cationic polymerization. The addition of 532 nm light accelerates the acid release, making the PAG a two-color …
-
Polymers for microelectronics and energy storage
… through chemistry. By employing a photobase generator in combination with a photoacid generator, the feature density obtained can be doubled without changing the aerial image, effectively extending the lifetime of exposure tools. This dissertation specifically focuses on pitch division at …
Page 1 of 3