Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"Photoconversion efficiency"”.
-
Light harvesting and photoconversion efficiency enhancement in dye-sensitized solar cells via molecular and photonic advancements
The main goal of this thesis is to investigate and develop the physics of dye-based photovoltaic physics through molecular and photonic routes. Numerous photovoltaics devices have been fabricated through the course of this work to study their characteristics, performance, physical composition and …
-
Optimization of the Synthesis of Carbon Modified (CM)-n-TiO2, (CM)-n-Fe2O3, and (CM)-p-WO3 Semiconductors for Efficient Photoelectrochemical Splitting of Water
… flame oxidation methods. Research showed maximum photoconversion efficiencies for water splitting of 9.08% and 11.31% at the optimized flat and grooved CM-n-TiO2 samples synthesized by thermal flame oxidation, respectively. CM-n-TiO2 synthesized by the combination of spray pyrolysis and thermal …
-
PROBING CHARGE TRANSPORT AND INTERFACE PROPERTIES OF PLANAR AND MESOPOROUS PEROVSKITE BASED SOLAR CELLS
… of photovoltaic research, exhibiting remarkable photoconversion efficiency and positioning themselves as prominent light absorbers in the field of solar cell development. One of the most pressing issues impeding further improvements is elucidation of working mechanism in fully assembled …
-
Solvothermal Process Assisted Sensitization of 1D Anodized TiO2 Nanotubes with 0D Cadmium Chalcogenides (CdTe, CdS) for Efficient Solar to Clean Energy Generation
… demonstrates 4.20-fold increased applied-bias-to photoconversion efficiency (ABPE) in comparison with the lone T_NT (0.77%). However, linker mediated T_NT/MPA-CdS photoelectrode exhibits relatively lower value of Isc (2.51 mA/cm2) and ABPE (1.79 %).
-
Defect-Rich Size-Selected Nanoclusters and Nanocrystalline Films of Titanium (IV) Oxide and Tantalum (IV) Oxide for Efficient Photocatalyst and Electroforming-Free Memristor Applications
… harvesting, with greater enhancement in the photoconversion efficiency. Three different sizes of TiO2 nanoclusters (4, 6 and 8 nm) are synthesized with appropriate combinations of aggregation length and Ar flow rate. Despite the low amount of material loading (of ~20% of substrate coverage), …
-
Gas Phase Interface Engineering Schemes for High Performance Dye Sensitized Solar Cells
… sol-gel processed TiO2 compact layer resulted in efficiency of 1.3%. Poor electronic quality of the TiO2/electrolyte interface would explain the poor PV performance of this solar cell. The DSSC with RF-sputtered TiO 2 compact layer resulted in 5.9%. Superior PV characteristics of the DSSC with …
-
Thermally stable, efficient, vapor-deposited inorganic perovskite solar cells
… <p>solar cells to fabricate devices with a photoconversion efficiency of 11.2% using a p-i-n</p> <p>architecture with the structure ITO/PTAA/ CsPbI3/PCBM/Al.</p> <p>The second part of this report focuses on the partial substitution of the iodide anion with a</p> <p>bromide anion to improve …
-
Computer simulation of ionic diffusion in MAPI perovskite
… type of solar cells material has increased the photoconversion efficiency from 12% to 21% in only seven years, making it one of the fastest-growing efficiency of all solar cells. However, under working conditions, the MAPI material tends to break down over time much faster than others. The …
-
Broad-Band Sensitised Upconverters for a Crystalline Silicon Solar Cell
… mature silicon technology. However, the limiting efficiency of crystalline silicon solar cells is 29.8% due to intrinsic loss mechanisms. One of the major loss mechanisms is transmission of sub-band-gap photons. In the case of crystalline silicon solar cells, approximately 20% of the solar energy …
-
Discovery of New Inorganic Metal Halide Scintillators for Homeland Security Applications
… relationships and advancements in photoconversion efficiency, halide perovskite and related compositional families have recently garnered significant attention for photovoltaics as well as radiation detection. However, many of these compounds have only been synthesized as …
-
Temperature and irradiance dependence of dye-sensitized solar cell performance
… linearly with increasing irradiance. The DSSC photoconversion efficiency did not vary appreciably at temperatures lower than 15° C but decreased with increasing temperature. Finally, the DSSC efficiency increased with increasing irradiance. There was no indication of significant coupling effect …
-
Lead sulfide quantum dots and their application for solar cells
… CdS and ZnS treatment is optimized to achieve a photoconversion efficiency of 1.77 %. 5) Finally, N-doped CNₓ/CNT hetero-electrocatalyst materials using polydopamine is synthesized, which are explored as counter electrode materials for dye-sensitized solar cell (DSSC). These CNₓ/CNTs material …
-
Metal Oxide and Oxynitride Semiconductors for Photoelectrochemical Water Splitting
… used as a photocatalyst in 1972, achieving high efficiency, operational stability and low-cost remain the major obstacles for its practical implementation. In this dissertation, we investigated several strategies to address the challenges impeding the performance of TiO2. First, we improved the …
-
Radiant Energy Spectrum Converters for Solar Energy Harvesting
… losses, numerical results show the optical efficiency of the elliptic array luminescent solar concentrator (LSC) is 63%, whereas in comparison the optical efficiency for a conventional planar LSC of the same size is 47.2%. 3) The RESC structures used in hybrid solar lighting applications are …
-
Synthesis and Characterization of Siloles, Silole-Containing Polymers and Photoswitchable Polymer Brush
… one of the silole-DPP polymer showed fairly high photoconversion efficiency but low current. Further characterization is required to study the conductivity. Silole-containing polymers were also prepared by the direct arylation reaction. The Direct Arylation reaction via C-H bond activation is …
-
Development of II-VI ternary alloys for CdTe-based solar cells
… photovoltaic technology. Recent advancements in photoconversion efficiency were achieved through the introduction of alloyed CdSeyTe1-y (CST) absorber, as well as replacement of conventional CdS window layer with more transparent alternatives such as MgxZn1-xO (MZO). These II-VI ternary alloys …
-
Synthesis and Characterization of Transition Metal-Based Dyes for the application in Dye Sensitized Solar Cells
… were designed and synthesized to enhance the efficiency of DSSC devices. In general, the strategy was to extend the absorption range of the dyes currently used. Therefore ruthenium dyes with varying extended π-conjugated donor systems and near-infrared absorbing group 10 metal complexes were …
-
Photoelectrical and photoelectrochemical characterization of the materials used in dye-sensitized and perovskite solar cells.
… cells are extensively studied to increase their photoconversion efficiency, and ultimately for their large-scale implementation. A dye-sensitized solar cell consists of a photoanode of a mesoporous film of titania sensitized with dye sandwiched with a counter electrode, which is usually a …
-
Ανάπτυξη νέων υβριδικών (ανόργανων-οργανικών) ημιαγώγιμων συστημάτων
… and the assessment of their photo-conversion efficiency, due to their application prospects in solar cells and optoelectronics, in general. More specifically, the inorganic part of the synthesized hybrid semiconductors constitute polycrystalline thin films of the general ZnxCd1-xSeyTe1-y …