Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"Photocurable resin"”.

  1. Synthesis and Assessment of Biobased Acrylated Epoxidized Soybean Oil Resins for Stereolithography 3D Printing of Microfluidic Devices

    … development and characterization of a biobased photocurable resin synthesized from soybean oil for use in stereolithography (SLA) 3D printing of microfluidic devices. The study explores a sustainable alternative to petroleum-based resins by performing an acrylation reaction on epoxidized soybean …

    gsu Repository record for Synthesis and Assessment of Biobased Acrylated Epoxidized Soybean Oil Resins for Stereolithography 3D Printing of Microfluidic Devices (opens in a new tab)

  2. LCD 3D Printing of a Photocurable Elastomer for Tissue Engineering

    … form of PGS using photoinitiator to become a photocurable resin suitable for liquid crystal display (LCD) 3D printing. PGSA was selected because its rheological and crosslinking behavior (and hence its mechanical properties) can be controlled by changes in curing time, temperature, and …

    sdstate Repository record for LCD 3D Printing of a Photocurable Elastomer for Tissue Engineering (opens in a new tab)

  3. FLUID INTERFACE SUPPORTED PRINTING FOR THREE-DIMENSIONAL OBJECT FABRICATION

    … additive manufacturing process that utilizes photocurable resin, which requires sacrificial supporting structures on part overhangs, increasing material waste and post-processing time. This study details a novel process for conducting top-down SLA 3D printing from a thin resin layer located …

    gatech Repository record for FLUID INTERFACE SUPPORTED PRINTING FOR THREE-DIMENSIONAL OBJECT FABRICATION (opens in a new tab)

  4. 3D-Printed Fluidic Devices and Incorporated Graphite Electrodes for Electrochemical Immunoassay of Biomarker Proteins

    … Flow-through devices are fabricated from photocurable-resin using a desktop digital light processing (DLP) projector-based 3D printer to produce 500-800 µm square cross-sectional fluidic channels. Threaded ports at the ends and center of the channel are included in the device design for …

    etsu Repository record for 3D-Printed Fluidic Devices and Incorporated Graphite Electrodes for Electrochemical Immunoassay of Biomarker Proteins (opens in a new tab) Download PDF for 3D-Printed Fluidic Devices and Incorporated Graphite Electrodes for Electrochemical Immunoassay of Biomarker Proteins (opens in a new tab)

  5. Development of a layerless additive manufacturing stereolithography machine to improve surface quality and dimensional accuracy

    … research. The material used in SLA is a photocurable resin. SLA fabrication has conventionally been executed in a layered build process, which results in the staircase effect: a common problem in layered manufacturing giving a lower quality part surface due to created cusps on the …

    uoit Repository record for Development of a layerless additive manufacturing stereolithography machine to improve surface quality and dimensional accuracy (opens in a new tab)

  6. Additive Manufacturing of Bovine Serum Albumin-based and Pluronic F127 Hydrogels and Bioplastics

    … and the development of globular protein-based resins for stereolithography. The inks for DIW are based on Pluronic F127, a triblock copolymer that forms temperature responsive, shear thinning hydrogels. Several rheological parameters that define a successful ink for DIW 3D printing are …

    washington Repository record for Additive Manufacturing of Bovine Serum Albumin-based and Pluronic F127 Hydrogels and Bioplastics (opens in a new tab)

  7. Additive Manufacturing And Synthesis Of Advanced Antibacterial And Sensing Photocurable Polymer Nanocomposites

    … and UV control systems are implemented for photocurable resin systems to synthesize and manufacture up to 14 novel nanocomposites. These novel nanocomposites are synthesized to improve tensile strength, wear resistance, water contact angle, antibacterial resistance, and heat dispersion. …

    oklahoma-thes Repository record for Additive Manufacturing And Synthesis Of Advanced Antibacterial And Sensing Photocurable Polymer Nanocomposites (opens in a new tab)

  8. MECHANICALLY ROBUST BIOCOMPATIBLE POLYMERIC NETWORKS FOR REPETITIVE LOADING

    … cyclic deformation, while traditional dental resins lack strong bonding to mineralized tissues and suffer from limited biofunctionality. To address these challenges, this work presents two classes of engineered polymer networks designed for enhanced mechanical robustness and interfacial …

    penn Repository record for MECHANICALLY ROBUST BIOCOMPATIBLE POLYMERIC NETWORKS FOR REPETITIVE LOADING (opens in a new tab)

  9. Diverse Hybrid Polymeric Structures from Pickering Emulsion-Based Templates Stabilized by Graphene Oxide and Its Derivative

    … jammed emulsion gels (bijels) composed of photocurable resin and water, conductive porous materials with excellent RF heating performance can be successfully obtained without complicated pre/post-processing. Future expansion of employing Pickering emulsion-based systems for producing hybrid …

    tamu Repository record for Diverse Hybrid Polymeric Structures from Pickering Emulsion-Based Templates Stabilized by Graphene Oxide and Its Derivative (opens in a new tab)

  10. Characterization of curing kinetics and polymerization shrinkage in ceramic-loaded photocurable resins for large area maskless photopolymerization (LAMP)

    … slurry comprising a ceramic particle loaded photocurable resin. Curing of the resin is completed rapidly with exposures lasting 20~160ms. Three-dimensional parts are built layer-by-layer by sequentially applying and selectively curing resin layers of 25-100 micron thickness. In LAMP, …

    gatech Repository record for Characterization of curing kinetics and polymerization shrinkage in ceramic-loaded photocurable resins for large area maskless photopolymerization (LAMP) (opens in a new tab)

  11. Micro/nano fabrication of polymeric materials by DMD-based micro-stereolithography and photothermal imprinting

    … software. Topographic patterns were created in photocurable resin by spatially controlling the curing depth. Spherical microlens arrays were fabricated and their optical performance was characterized. This technique is capable of fabricating optical elements with any surface topography. In the …

    texas Repository record for Micro/nano fabrication of polymeric materials by DMD-based micro-stereolithography and photothermal imprinting (opens in a new tab)

  12. The Engineering of Reversible Thermoset Resins Based on the Reversible Photodimerization of Coumarin

    … of coumarin. Thermoset polymers like epoxy resins are widely used for their many favorable properties including high dimensional stability, strength, and the ability to be cured from nonvolatile liquid precursors. However, the insolubility and intractability of these crosslinked polymers …

    arizona-thes Repository record for The Engineering of Reversible Thermoset Resins Based on the Reversible Photodimerization of Coumarin (opens in a new tab)

  13. 3D printing in the biosciences : applications for diabetic complications

    … printing field. It works by utilizing a liquid photocurable resin that can be sprayed onto a substrate layer by layer and cured into a final desirable three-dimensional object. With this printer multiple materials and colors can be incorporated into a single model. By incorporating multiple …

    msu Repository record for 3D printing in the biosciences : applications for diabetic complications (opens in a new tab)