Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"Photonic curing"”.

  1. Pulsed Photonic Curing of Conformal Printed Electronics

    … surfaces of mechanical components. Advanced curing/sintering processes such as pulsed photonic curing can be used to cure/sinter printed inks to produce conductive traces. However, the use of photonic curing on conformal surfaces introduces two sources of variability into the process, which …

    rit Repository record for Pulsed Photonic Curing of Conformal Printed Electronics (opens in a new tab)

  2. Photonic Curing Solution-Processed Metal Oxide Semiconductor Thin-Film Transistors

    … devices for health monitoring. In this work, photonic curing is introduced as a method to rapidly and efficiently create high-quality thin-film transistors. This work addresses the importance of material parameters on the transient curing response and design guidelines for developing …

    umn Repository record for Photonic Curing Solution-Processed Metal Oxide Semiconductor Thin-Film Transistors (opens in a new tab)

  3. Metal Oxide Thin-Film Transistors for Flexible Electronics: Advances in Fabrication, Characterization and Modeling

    … have a very low tolerance for high temperatures. Photonic curing is introduced and studied as a high-temperature processing method compatible with such low thermal budget plastic substrates. Metal oxide TFTs are demonstrated on plastic substrates using photonic curing as the processing method. …

    umn Repository record for Metal Oxide Thin-Film Transistors for Flexible Electronics: Advances in Fabrication, Characterization and Modeling (opens in a new tab)

  4. Perovskite Solar Cells and Avenues to Address Their Stability with the Incorporation of Two-Dimensional Materials

    … when paired with an annealing method known as photonic curing. After photonic curing a silicon substrate with WS2 ink above the substrate, a 200% increase in current is observed with interesting changes also observed in their Raman and photoluminescence (PL) spectra as well. A similar such …

    unt Repository record for Perovskite Solar Cells and Avenues to Address Their Stability with the Incorporation of Two-Dimensional Materials (opens in a new tab)

  5. Low cost processing of CuInSe2 nanocrystals for photovoltaic devices

    … pulsed light processing technique known as photonic curing was used which allows for high temperature sintering of nanocrystal films on temperature-sensitive substrates. High energy pulses cause the nanocrystals to sinter into large grains, primarily through melting and resolidification. The …

    texas Repository record for Low cost processing of CuInSe2 nanocrystals for photovoltaic devices (opens in a new tab)

  6. Sintering of Cu(In,Ga)Se2 nanocrystal films for photovoltaics

    … methods are investigated here: selenization and photonic curing. The nanocrystal films can be sintered by annealing the films in a Se environment, also known as selenization. The selenized device morphology and efficiency is influenced by the starting nanocrystal composition. A Se/Carbon layer …

    texas Repository record for Sintering of Cu(In,Ga)Se2 nanocrystal films for photovoltaics (opens in a new tab)

  7. Effect of Substrates in the Resistivity and Adhesion of Copper Nanoparticle Ink

    … nanoparticle inks. This technique is known as photonic curing. Paper, polyethylene terephthalate (PET), and polyimide have been used as substrates with the aim of determining how different substrates affect the behavior of the ink and the photonic curing parameters. A statistical approach was …

    rit Repository record for Effect of Substrates in the Resistivity and Adhesion of Copper Nanoparticle Ink (opens in a new tab)

  8. Liquid Phase Exfoliation of Tungsten Diselenide for Environmental Gas and Breath Sensing

    … coupled in a two-terminal configuration; photonic curing system along with the hot plate annealing process was used on the thin film for rapid annealing, enhancing particle connectivity, stable crystal structure, and increasing overall electrical conductivity. The inkjet printing …

    unt Repository record for Liquid Phase Exfoliation of Tungsten Diselenide for Environmental Gas and Breath Sensing (opens in a new tab)

  9. Characterization of Flexible Hybrid Electronics Using Stretchable Silver Ink and Ultra-Thin Silicon Die

    … using box oven, conveyor convection oven, and photonic curing processes. Reliability tests were conducted including a tape test, crease test, wash test, and abrasion test. Optimization of each curing process resulted in all three methods’ ability to achieve the ink sheet resistance …

    calpoly Repository record for Characterization of Flexible Hybrid Electronics Using Stretchable Silver Ink and Ultra-Thin Silicon Die (opens in a new tab)

  10. Integrated multi-media platform for hybrid 3D printing

    … Printing and the non-additive processes of photonic curing and robotic pick and place. The increased functionality of printed parts relies on the properties of the build materials used. A silver based ink is studied to provide electrical functionality within printed parts. The thermal curing …

    gatech Repository record for Integrated multi-media platform for hybrid 3D printing (opens in a new tab)

  11. Interface and Morphology Engineering in Solution-Processed Electronic and Optoelectronic Devices

    … realize high-performance flexible PSCs, a unique photonic curing technique was demonstrated to achieve highly conductive TiO<sub>2</sub> as electron transport layer on flexible substrates. Moreover, the effect of processing conditions on perovskite film growth was evaluated and taken into account …

    utk-theses Repository record for Interface and Morphology Engineering in Solution-Processed Electronic and Optoelectronic Devices (opens in a new tab)

  12. Evaluation of emerging additive technologies for circuit board manufacturing

    … This is done by exposure to light from a photonic curing lamp after each layer is deposited. This allows to produce complex two- and three- dimensional circuit boards, providing the possibility to significantly speed-up process of PCBs development and prototyping. It also allows for …

    chalmers Repository record for Evaluation of emerging additive technologies for circuit board manufacturing (opens in a new tab)

  13. FUNDAMENTAL STUDIES OF OPTICAL PROPERTIES AND ELECTROCATALYTIC PROPERTIES OF LOW DIMENSIONAL NANOMATERIALS CARBON NANO DOTS AND 2D TRANSITION METAL DICHALCOGENIDES

    … and clusters supported on WS2 (Pt/WS2) using photonic curing, with improved efficiency for hydrogen evolution reaction (HER). This catalyst design constitutes enhanced atomic utilization, higher number of accessible active sites and catalytic activity modulation of Pt through electronic metal …

    uky-thes Repository record for FUNDAMENTAL STUDIES OF OPTICAL PROPERTIES AND ELECTROCATALYTIC PROPERTIES OF LOW DIMENSIONAL NANOMATERIALS CARBON NANO DOTS AND 2D TRANSITION METAL DICHALCOGENIDES (opens in a new tab)

  14. Perovskites for Extreme-Radiation Environments and Scalable Film Deposition Methods for Solar Cell Interfacial Layers

    … here we consider the use of spray-coating and photonic curing as a means to deposit the liquid-phased exfoliated transition metal dichalcogenide tungsten diselenide as a hole transport layer and comparing the results with conventional methods such as spin-coating, inkjet-printing, and a …

    unt Repository record for Perovskites for Extreme-Radiation Environments and Scalable Film Deposition Methods for Solar Cell Interfacial Layers (opens in a new tab)