Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 128 for “"Photopolymer"”.

  1. Characterization of photopolymer-based diffractive optical elements

    En esta Tesis se presenta una completa caracterización y modelización de diferentes fotopolímeros para cada uso particular. Se han fabricado y caracterizado Elementos Ópticos Difractivos (EOD) estáticos en diferentes composiciones, como las basadas en polivinilalcohol acrilamida (PVA/AA) y uno de …

    alicante Repository record for Characterization of photopolymer-based diffractive optical elements (opens in a new tab)

  2. Hydroxyapatite structures created by additive manufacturing with extruded photopolymer

    … support material. We created a HAp-based photopolymer slurry that achieved 41 vol% HAp loading in homogenous slurries. The HAp slurries presented a strong shear thinning behavior and dispersion stability over 20 days under dark storage conditions. The resultant rheological behavior of HAp …

    colostate Repository record for Hydroxyapatite structures created by additive manufacturing with extruded photopolymer (opens in a new tab)

  3. Modeling and image quality of photopolymer-based holographic optical elements

    Hologram formation in photopolymers is believed to be largely a result of monomer diffusion. By solving the diffusion equation in terms of grating harmonics, the numerical results can be expressed in a meaningful way and are straightforward to compare with experimental results. The diffusion model …

    rit Repository record for Modeling and image quality of photopolymer-based holographic optical elements (opens in a new tab)

  4. THE INK TRANSFER AND IMAGE DEFINITION DIFFERENCES BETWEEN ELASTOMER AND PHOTOPOLYMER PRINTING SYSTEMS

    … more ink and produced shaper printing than the photopolymer printing system. In particular, the elastomer printing system showed greater solid ink densities for the solvent and aqueous ink printing conditions, while the photopolymer printing system showed higher values in the ultraviolet ink …

    clemson Repository record for THE INK TRANSFER AND IMAGE DEFINITION DIFFERENCES BETWEEN ELASTOMER AND PHOTOPOLYMER PRINTING SYSTEMS (opens in a new tab)

  5. Self-driving Lab of Photopolymer Synthesis and Mechanical Testing for Expedited Materials Discovery

    … has been made for the discovery of 3D printable photopolymers with targeted mechanical properties. This work has developed three important components of SDLs for synthesizing and testing photopolymers. The first component prepares photopolymer inks using a robotic arm, closed-loop liquid …

    gatech Repository record for Self-driving Lab of Photopolymer Synthesis and Mechanical Testing for Expedited Materials Discovery (opens in a new tab)

  6. Mechanical Characterisation, Analysis and Modelling of Particulate Nanocomposites Printed Using Photopolymer Extrusion Technique

    A new photopolymer extrusion 3D printing technique is proposed in this research. This hybrid 3D printer combines the strengths of two well established and commercial 3D printers i.e. fused deposition modelling (FDM) and UV assisted 3D printing (UV3DP). One of the distinct features of this novel …

    auckland-tech Repository record for Mechanical Characterisation, Analysis and Modelling of Particulate Nanocomposites Printed Using Photopolymer Extrusion Technique (opens in a new tab)

  7. Curing Characteristics of Photopolymer Resin With Dispersed Glass Microspheres in Vat Polymerization 3D Printing

    The curing characteristics of photopolymer resin determine the relationship between the vat polymerization (VP) process parameters and the layer thickness, geometric accuracy, and surface quality of the 3D printed specimen. Dispersing filler material into the photopolymer resin changes its curing …

    vt Repository record for Curing Characteristics of Photopolymer Resin With Dispersed Glass Microspheres in Vat Polymerization 3D Printing (opens in a new tab)

  8. Nonlinear light propagation and self-inscription processes in a photopolymer doped with Ag nanoparticles

    … organosiloxane sols, which can subsequently be photopolymerized in the presence of photoinitiators and therefore, be patterned through a variety of photo-inscription processes. The mechanism of Ag nanoparticle growth and evolution is described in detail followed by the fabrication of periodic …

    mcmaster Repository record for Nonlinear light propagation and self-inscription processes in a photopolymer doped with Ag nanoparticles (opens in a new tab)

  9. Characterization and application of an additively manufactured photopolymer: From nanoindentation to a novel mechanical attachment for scalable structures

    … technique for an SLA-manufactured viscoelastic photopolymer resin (Formlabs Tough 1500 V1) and applies the resulting material understanding to the design of a novel mechanically interlocking structural connector. A finite element simulation validated the flat-punch (FP) analytical solution …

    hawaii Repository record for Characterization and application of an additively manufactured photopolymer: From nanoindentation to a novel mechanical attachment for scalable structures (opens in a new tab) Embargoed until 2027-06-18

  10. Design and Fabrication of a Mask Projection Microstereolithography System for the Characterization and Processing of Novel Photopolymer Resins

    … process, and quantify the performance of novel photopolymers. MPμSL is an Additive Manufacturing process that uses DLP technology to digitally pattern UV light and selectively cure entire layers of photopolymer resin and fabricate a three dimensional part. For the MPμSL system designed in this …

    vt Repository record for Design and Fabrication of a Mask Projection Microstereolithography System for the Characterization and Processing of Novel Photopolymer Resins (opens in a new tab)

  11. Real-time monitoring of exposure controlled projection lithography (ECPL) process

    … based additive manufacturing process in which photopolymer resin is used to fabricate lens shaped features. During this process, a dynamic mask projects radiation patterns through a transparent substrate onto the photopolymer resin to grow features from the substrate surface. The …

    gatech Repository record for Real-time monitoring of exposure controlled projection lithography (ECPL) process (opens in a new tab)

  12. Multi-material 3D Printing with Hybrid Direct Ink Writing-volumetric Additive Manufacturing (DIW-VAM) System

    … into a glass cylinder containing a primary UV photopolymer resin. The suspended UV photopolymer resin has a tensile strength of 50 MPa while the primary UV photopolymer resin is a flexible photopolymer material with a tensile strength of 5.5 MPa. Such a dual-material printing capability can …

    ucf Repository record for Multi-material 3D Printing with Hybrid Direct Ink Writing-volumetric Additive Manufacturing (DIW-VAM) System (opens in a new tab)

  13. Fabrication and Characterization of Carbon Nanocomposite Photopolymers via Projection Stereolithography

    … patterns light to selectively expose and layer photopolymer into three dimensional objects. Nanomaterials within the photopolymer are therefore embedded inside fabricated objects. Adding varying concentrations of multi-walled carbon nanotubes (MWCNT) to the photopolymer may allow for the …

    vt Repository record for Fabrication and Characterization of Carbon Nanocomposite Photopolymers via Projection Stereolithography (opens in a new tab)

  14. Liquid Crystal on Silicon Displays Characterization for Diffractive Applications and for Holographic Data Storage in Photopolymers

    … a full holographic data storage scheme using a photopolymer as holographic recording medium. We evaluate the capability of PVA/AA photopolymer for this holographic data storage system that incorporates as a novelty a convergent correlator geometry.

    alicante Repository record for Liquid Crystal on Silicon Displays Characterization for Diffractive Applications and for Holographic Data Storage in Photopolymers (opens in a new tab)

  15. Ενίσχυση φωτοπολυμερών με νανοδομημένα υλικά άνθρακα. Αγώγιμα νανοσύνθετα υλικά για τρισδιάστατη εκτύπωση

    Photopolymerization is the process of curing a polymer using ultraviolet (UV) radiation. It’s a simple curing method as proper polymer, called photopolymer, needs to be exposed under UV radiation and has great advantages as it can be completed rapidly, without any solvents and in ambient …

    greece Repository record for Ενίσχυση φωτοπολυμερών με νανοδομημένα υλικά άνθρακα. Αγώγιμα νανοσύνθετα υλικά για τρισδιάστατη εκτύπωση (opens in a new tab)

  16. Empirical process planning for exposre controlled projection lithography

    … light at certain regions with a liquid photopolymer resin bath. It is based on the principle of curing (hardening) a liquid photopolymer into a specific shape. The Exposure Controlled Projection Lithography (ECPL) process is developed based on SLA as a method to fabricate precise …

    gatech Repository record for Empirical process planning for exposre controlled projection lithography (opens in a new tab)

  17. Empirical process planning for exposure controlled projection lithography

    … light at certain regions with a liquid photopolymer resin bath. It is based on the principle of curing (hardening) a liquid photopolymer into a specific shape. The Exposure Controlled Projection Lithography (ECPL) process is developed based on SLA as a method to fabricate precise …

    gatech Repository record for Empirical process planning for exposure controlled projection lithography (opens in a new tab)

  18. The Effects of Quantum Dot Nanoparticles on Polyjet Direct 3D Printing Process

    … for this work, utilizes inkjet to deposit a photopolymer into layers, which are then cured with a UV light. An investigation into the visibility of the QDs within the printed PolyJet media revealed that the QDs produce PUF patterns visible via fluorescent microscopy. Furthermore, rheological …

    vt Repository record for The Effects of Quantum Dot Nanoparticles on Polyjet Direct 3D Printing Process (opens in a new tab)

  19. Additive Manufacturing of Elastomeric Lung Phantoms in Radiation Oncology

    … targeted radiation therapy. A highly flexible UV photopolymer material with an elastic modulus of approximately 350 KPa was formulated for use in a custom-built stereolithography-based 3D printing apparatus. The printer built for 3D printing of the photopolymer features a large build volume with …

    ucf Repository record for Additive Manufacturing of Elastomeric Lung Phantoms in Radiation Oncology (opens in a new tab)

Page 1 of 7