Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 30 for “"Physiological loads"”.

  1. The Relationship of Time Spent Training at Three Physiological Loads and Performance in Endurance Athletes

    … between time spent at three training loads and running performance during a Division I collegiate cross-country season. Subjects were fifteen collegiate level male and female runners all with competition experience of ≥3 years.. Subjects HRmax was determined during a treadmill run to …

    northern-iowa Repository record for The Relationship of Time Spent Training at Three Physiological Loads and Performance in Endurance Athletes (opens in a new tab)

  2. Quantification of Muscular, Postural, and Upper Limb Movement Demands During Overhead Crane Operation to Evaluate the Potential Efficacy of a Camera Based System

    … neck and shoulder pain. Biomechanical and physiological loads of crane operators were quantified onsite and used as a guide to design a laboratory experiment to test the efficacy of a camera based system to reduce the loads on the operators. Electromyography revealed that muscle loads …

    guelph Repository record for Quantification of Muscular, Postural, and Upper Limb Movement Demands During Overhead Crane Operation to Evaluate the Potential Efficacy of a Camera Based System (opens in a new tab)

  3. A Biphasic Multiscale Investigation of the Biomechanical Microenvironment of Articular Cartilage

    … tested under axial quasi-static indentation and physiological cyclic sliding.Elevated principal and shear strains, and decreased fluid pressurization were found with simulated cartilage degeneration. Maximum intracellular compressive (19%) and shear strain (15%) occurred in the superficial zone …

    carleton Repository record for A Biphasic Multiscale Investigation of the Biomechanical Microenvironment of Articular Cartilage (opens in a new tab)

  4. An evaluation of sacroiliac joint stability with differing implant configurations in synthetic, cadaveric, and finite element models

    … before and after cyclic loading under physiological loads. Cadaveric biomechanical testing was then conducted to assess the SIJ stability with the use of two versus three implants. Finally, a basic SIJ finite element model was developed and used to further analyze the stability of …

    umn Repository record for An evaluation of sacroiliac joint stability with differing implant configurations in synthetic, cadaveric, and finite element models (opens in a new tab)

  5. A Novel Piezoelectric Device with Dual Functions of Studying Biological Soft Tissues

    … a tissue sample and a load applier for mimicking physiological loads experienced by the tissue sample in vivo, while the mechanical behavior can be visually observed under a microscope simultaneously. By combining the classic theories in solid mechanics and piezoelectricity, the performance of the …

    odu Repository record for A Novel Piezoelectric Device with Dual Functions of Studying Biological Soft Tissues (opens in a new tab)

  6. Investigation of a HA/PDLGA/Carbon Foam Material System for Orthopedic Fixation Plates Based on Time-Dependent Properties

    … sufficiently stiff and strong to sustain loads throughout healing while maintaining fracture stability. The primary aim of this study is to quantify the degradation rate of a bioresorbable material system, then use this degradation rate to determine the material response of an orthopedic …

    tamu Repository record for Investigation of a HA/PDLGA/Carbon Foam Material System for Orthopedic Fixation Plates Based on Time-Dependent Properties (opens in a new tab)

  7. Dynamic Ball & Socket Joint Force Simulator

    … These loading protocols do not replicate physiological loading conditions. The Dynamic Ball and Socket Joint Force Simulator (DBSJFS) was designed to apply physiological loads through an articular surface to study implant stability. The DBSJFS was custom built to integrate with a MTS 858 …

    ku Repository record for Dynamic Ball & Socket Joint Force Simulator (opens in a new tab)

  8. The effects of training organisation on the physiological, metabolic and molecular responses to a soccer-specified laboratory based training simulation

    … of training may result in differences in the physiological stress placed on players. This study aimed to investigate the influence of training organisation on the physiological, metabolic and molecular responses to soccer-specific intermittent exercise in skeletal muscles. In Chapter 3, the …

    liverpool-jm Download PDF for The effects of training organisation on the physiological, metabolic and molecular responses to a soccer-specified laboratory based training simulation (opens in a new tab)

  9. An Investigation of the Biophysical and Biochemical Properties of Perlecan/HSPG2: Implications for Bone Mechanotransduction and Endochondral Ossification

    … tether that is capable of withstanding physiological loads imposed on cortical bone.The second part of this study examined perlecan in the context of early precartilage condensation. This study demonstrated a novel sub-domain of perlecan, PLN IV-3, located in its fourth domain modulates …

    rice Repository record for An Investigation of the Biophysical and Biochemical Properties of Perlecan/HSPG2: Implications for Bone Mechanotransduction and Endochondral Ossification (opens in a new tab)

  10. Fit for Stability: Assessing the Role of Interference Fit in Cementless Knee Implant Stability

    … gap dynamics, and bone deformation under physiological loads (gait and squat). Key findings include: • Varying interference fits (350 μm vs. 700 μm) did not significantly alter stability in femoral or tibial components. • Bone quality strongly influences fixation; low bone mineral density …

    radboud Repository record for Fit for Stability: Assessing the Role of Interference Fit in Cementless Knee Implant Stability (opens in a new tab) Download PDF for Fit for Stability: Assessing the Role of Interference Fit in Cementless Knee Implant Stability (opens in a new tab)

  11. Biomechanics of the tibiofemoral joint in relation to the mechanical factors associated with osteoarthritis of the knee

    … the anterior cruciate ligament influences joint loads. The tibiofemoral joint kinematics from the activities studied was related to topographically-dependent articular cartilage mechanical properties and morphology, showing some regions to have unique properties that make them potential sites for …

    nus Repository record for Biomechanics of the tibiofemoral joint in relation to the mechanical factors associated with osteoarthritis of the knee (opens in a new tab) Download file for Biomechanics of the tibiofemoral joint in relation to the mechanical factors associated with osteoarthritis of the knee (opens in a new tab)

  12. Physical Preparation in Adolescent Inter-County Ladies’Gaelic Football: Player Characteristics, Game Demands, and Coaching Practices

    … eight’ positions experienced particularly high physiological loads. These findings indicate a potential mismatch between players’ developing physical capacities and the increasing demands of competition, supporting the need for age- and position-specific conditioning. The second research stream …

    dcu Download PDF for Physical Preparation in Adolescent Inter-County Ladies’Gaelic Football: Player Characteristics, Game Demands, and Coaching Practices (opens in a new tab)

  13. The Correlation Between Biomechanical Loads and Psychophysical Ratings

    … methodology, relate to physical (biomechanical) loads. A fundamental assumption of this method is that humans are capable of estimating biomechanical and physiological loads that are placed on the body. Based on this assumption, estimates that are obtained through the methodology are used as an …

    vt Repository record for The Correlation Between Biomechanical Loads and Psychophysical Ratings (opens in a new tab)

  14. The Craniomaxillofacial Skeleton: New Approaches in Computational Biomechanics and Fracture Stabilization

    … of the craniomaxillofacial skeleton (CMFS) under physiological loads is among the least understood in the field of musculoskeletal biomechanics. The highly complex structure of the CMFS defies reduction to analogous or simpler components. Its modelling demands a holistic and integrated approach in …

    toronto-retro Repository record for The Craniomaxillofacial Skeleton: New Approaches in Computational Biomechanics and Fracture Stabilization (opens in a new tab)

  15. Effects on Initial Fixation of Cementless Tibial Trays in Total Knee Arthroplasty

    … VIVO, and combined loading scenarios replicating physiological loads experienced in vivo such as gait, stair descent and deep knee bending cycles. Prior to testing, cadaveric tibia were implanted with either cementless DePuy Attune RP, cementless DePuy Attune FB or cementless Stryker Triathlon FB …

    denver Repository record for Effects on Initial Fixation of Cementless Tibial Trays in Total Knee Arthroplasty (opens in a new tab)

  16. Development of cell-sheet constructs for layer-by-layer tissue engineering using the blood vessel as an experimental model

    … tensile properties capable of withstanding physiological loads for up to twelve weeks in vivo. A novel glow-discharge plasma immobilisation technique was used to functionalise the ?XPCL film with carboxyl or amine groups, which allowed the conjugation of a range of biological moieties. …

    nus Repository record for Development of cell-sheet constructs for layer-by-layer tissue engineering using the blood vessel as an experimental model (opens in a new tab) Download file for Development of cell-sheet constructs for layer-by-layer tissue engineering using the blood vessel as an experimental model (opens in a new tab)

  17. Phase transitions in the rheology of biopolymer networks

    … and exceptional resilience against unpredictable physiological loads. An essential contributor to this resilience is their highly strain-dependent stiffness; they easily deform to accommodate small strains, yet resist damage by stiffening significantly in response to larger strains. Recent work …

    rice Repository record for Phase transitions in the rheology of biopolymer networks (opens in a new tab)

  18. Biomechanical loads in running-based sports: estimating ground reaction forces from segmental accelerations

    Training loads are monitored in sports as part of a process which aims to enhance performance whilst simultaneously reducing the risk of injury. Although physiological loads have been investigated extensively, biomechanical loading is still poorly quantified and, therefore, largely unexplored. …

    liverpool-jm Repository record for Biomechanical loads in running-based sports: estimating ground reaction forces from segmental accelerations (opens in a new tab) Download PDF for Biomechanical loads in running-based sports: estimating ground reaction forces from segmental accelerations (opens in a new tab)

  19. Biomechanics of aligned cell sheets for arterial tissue engineering

    … tunica media, is responsible for bearing normal physiological loads. The medial layer features alternating layers of smooth muscle cells and extracellular matrix where each layer has smooth muscle cells and collagen aligned helically along the length of the artery. This structural feature coupled …

    bu Repository record for Biomechanics of aligned cell sheets for arterial tissue engineering (opens in a new tab)

  20. Improvement of Ex Vivo Testing Methods for Spine Biomechanical Characterization

    … validated. The opening/deployment and physiological loads of ± 7.5 N•m were cyclically tested on each clamp. The clamps showed no signs of failure and remained securely attached to the vertebrae. The resultant device/vertebrae interface stiffnesses were 4 to 10x greater than their …

    byu Repository record for Improvement of Ex Vivo Testing Methods for Spine Biomechanical Characterization (opens in a new tab) Download PDF for Improvement of Ex Vivo Testing Methods for Spine Biomechanical Characterization (opens in a new tab)

Page 1 of 2