Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"Piezoelectric elements"”.

  1. Dynamic Particle Rejection on Optical Lenses Using Piezoelectric Elements

    In the present investigation, the potential for removing undesirable particles from optical surfaces remotely has been explored. The primary target for this research is in surveillance cameras, satellite lenses, planetary rover optical lenses and other space based optical systems. The mechanism for …

    ku Repository record for Dynamic Particle Rejection on Optical Lenses Using Piezoelectric Elements (opens in a new tab)

  2. Effects of temperature on the electrical impedance of piezoelectric elements

    … Material Systems and Structures, employs piezoelectric (PZT) materials for tracking the structural impedance to qualitatively identify damage. The mechanical impedance of a structure is a function of the structure's mass, stiffness, damping, and structural boundary conditions. Changes in …

    vt Repository record for Effects of temperature on the electrical impedance of piezoelectric elements (opens in a new tab)

  3. Digital Signal Processing Methods for Source Function Extraction of Piezoelectric Elements

    … signal processing methodology that uses mounted piezoelectric elements instead of optical devices. This study first characterizes the spatial and temporal effects of oil coupled and glued piezoelectric sources, and then develops a procedure to interpret and model the distortion caused by their …

    gatech Repository record for Digital Signal Processing Methods for Source Function Extraction of Piezoelectric Elements (opens in a new tab)

  4. Mathematical Modeling, Motion Planning and Control of Elastic Structures with Piezoelectric Elements

    … systems, where for the wingsail the finite elements method is used due to the risen complexity of the curved structure. To achieve a precise description of the governing dynamics different parameter identification concepts are discussed and applied. This leads to a precise but rather complex …

    cau-kiel Repository record for Mathematical Modeling, Motion Planning and Control of Elastic Structures with Piezoelectric Elements (opens in a new tab)

  5. Validation of torsional-bending piezoelectric actuator concept

    … closed cross-section structural members using piezoelectric elements is shown by investigating analytically, numerically, and experimentally firstly an aluminum flat plate model and then a composite beam model. The investigated concept is based on the application of piezoelectric elements …

    ut-knoxville Repository record for Validation of torsional-bending piezoelectric actuator concept (opens in a new tab)

  6. Design of a Linear Ultrasonic Piezoelectric Motor

    … it is in periodic contact with a driven surface. Piezoelectric elements are used to create the elliptical motions and are driven near a resonant frequency to create the needed displacements for the motor to operate. An idea for a motor frame was conceived that consisted of an arch, a center …

    byu Repository record for Design of a Linear Ultrasonic Piezoelectric Motor (opens in a new tab) Download PDF for Design of a Linear Ultrasonic Piezoelectric Motor (opens in a new tab)

  7. Multifunctional piezoelectric metastructures for vibration attenuation and energy harvesting

    … the work detailed in this thesis focuses on piezoelectric energy harvesting utilizing the inherent property of piezoelectric elements for converting mechanical strain into electrical energy. Electromechanical models are developed and analyzed numerically for various LR vibrating structures …

    gatech Repository record for Multifunctional piezoelectric metastructures for vibration attenuation and energy harvesting (opens in a new tab)

  8. ACTIVE NON-RECIPROCAL ACOUSTIC METAMATERIALS

    … unit cells which are provided with programmable piezoelectric elements. By tuning the structural properties of these cells, the 1D array can impede the wave propagation over specific frequency ranges. In order to achieve non-reciprocal acoustic wave transmission of the AMMs, three different …

    maryland Repository record for ACTIVE NON-RECIPROCAL ACOUSTIC METAMATERIALS (opens in a new tab)

  9. Piezoelectric Transformer Characterization and Application of Electronic Ballast

    The characterization and modeling of piezoelectric transformers are studied and developed for use in electronic ballasts. By replacing conventional L-C resonant tanks with piezoelectric transformers, inductor-less piezoelectric transformer electronic ballasts have been developed for use in …

    vt Repository record for Piezoelectric Transformer Characterization and Application of Electronic Ballast (opens in a new tab)

  10. HIGH PERFORMANCE PIEZOELECTRIC MATERIALS AND DEVICES FOR MULTILAYER LOW TEMPERATURE CO-FIRED CERAMIC BASED MICROFLUIDIC SYSTEMS

    The incorporation of active piezoelectric elements and fluidic components into micro-electromechanical systems (MEMS) is of great interest for the development of sensors, actuators, and integrated systems used in microfluidics. Low temperature cofired ceramics (LTCC), widely used as electronic …

    uky-thes Repository record for HIGH PERFORMANCE PIEZOELECTRIC MATERIALS AND DEVICES FOR MULTILAYER LOW TEMPERATURE CO-FIRED CERAMIC BASED MICROFLUIDIC SYSTEMS (opens in a new tab)

  11. The alpha-Ga (010) Surface Investigated by Room and Low Temperature Scanning Tunneling Microscopy

    … at room temperature by using a new type of the piezoelectric elements � shear stack piezoelectric elements (see Fig.1 and 2, page 26 and Fig.5, page 29). This resulted in very high resonance frequencies and overall stability - the resonance amplitudes were improved by more than one order of …

    fu-berlin Repository record for The alpha-Ga (010) Surface Investigated by Room and Low Temperature Scanning Tunneling Microscopy (opens in a new tab)

  12. Artificial Skin Tactile Sensor for Prosthetic and Robotic Applications

    … These artificial skin tactile sensors used small piezoelectric ceramic disks to measure applied force at multiple points on each glove. The gloves were created using silicone rubber to simulate both the texture and look of human skin, while maintaining both flexibility and durability. The sensor …

    calpoly Repository record for Artificial Skin Tactile Sensor for Prosthetic and Robotic Applications (opens in a new tab)

  13. Torsional control of thin-walled structures by piezoelectric actuators

    … closed cross-section tube with piezo elements laminated to its walls. The effectiveness of piezo elements in damping torsional vibration was determined. As a part of the fundamental research, Vlasov's theory was used to calculate the amount of twist on a flat thin plate when it was …

    ut-knoxville Repository record for Torsional control of thin-walled structures by piezoelectric actuators (opens in a new tab)

  14. Implementation of Model-Free Sliding Mode Control on a Multi-Input Multi-Output System

    … to actuate a flapping wing structure is using piezoelectric elements. Using flapping wings to perform aerial maneuvers and facilitate stable flight will require precise control of the piezoelectric elements and control surfaces. The focus of the research is the construction of a feedback …

    rit Repository record for Implementation of Model-Free Sliding Mode Control on a Multi-Input Multi-Output System (opens in a new tab)

  15. Inverse Problem Formulation and Deep Learning Methods for Ultrasound Beamforming and Image Reconstruction

    … images. Ultrasound transducers are made from piezoelectric elements, which are responsible for the insonification of the medium with non-invasive acoustic waves and also the reception of backscattered signals. Design optimizations span all steps of the image formation pipeline, including …

    concordia Download PDF for Inverse Problem Formulation and Deep Learning Methods for Ultrasound Beamforming and Image Reconstruction (opens in a new tab)

  16. Convolution and Volterra Series Approach to Reduced Order Modelling of Unsteady Aerodynamic Loads and Improving Piezoelectric Energy Harvesting of an Aeroelastic System

    … to answer the question: how to maximize the piezoelectric power extraction of an aeroelastic system? A simple rectangular cantilever plate, which experiences LCO, was used as a basic vibrating system. The plate was covered entirely with piezoelectric elements on both sides. By adding small …

    duke Repository record for Convolution and Volterra Series Approach to Reduced Order Modelling of Unsteady Aerodynamic Loads and Improving Piezoelectric Energy Harvesting of an Aeroelastic System (opens in a new tab)

Page 1 of 3