Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Piezospectroscopy"”.

  1. Nanocomposite Coating Mechanics via Piezospectroscopy

    Coatings utilizing the piezospectroscopic (PS) effect of alpha alumina could enable on the fly stress sensing for structural health monitoring applications. While the PS effect has been historically utilized in several applications, here by distributing the photo-luminescent material in …

    ucf Repository record for Nanocomposite Coating Mechanics via Piezospectroscopy (opens in a new tab)

  2. Low Strain Rate Studies Of Alumina Epoxy Composites Using Piezospectroscopy

    Particulate composites are widely used in many aerospace and military applications as energetic materials, armor materials or coatings and their behavior under dynamic loads have gained increasing significance. The addition of modifiers such as alumina nanoparticles generally facilitates the …

    ucf Repository record for Low Strain Rate Studies Of Alumina Epoxy Composites Using Piezospectroscopy (opens in a new tab)

  3. Effect of Particle Size on Mechanics of Particle Reinforced Composites using Photoluminescence Piezospectroscopy

    … are valuable. In this work, photoluminescent piezospectroscopy (PLPS) uses the frequency shift of the stress sensitive R-lines to non-destructively establish the mechanics of 100 nm, 150 nm, and 350 nm Cr3+ doped -alumina nanoparticles in an EPON 826 matrix under applied compressive stress. …

    ucf Repository record for Effect of Particle Size on Mechanics of Particle Reinforced Composites using Photoluminescence Piezospectroscopy (opens in a new tab)

  4. Calibration of Alumina-epoxy Nanocomposites Using Piezospectroscopy for the Development of Stress-sensing Adhesives

    A non-invasive method to quantify the stress distribution in polymer-based materials is presented through the piezospectroscopic calibration of alumina-epoxy nanocomposites. Three different alumina volume fraction nanocomposites were created and loaded under uniaxial compression in order to …

    ucf Repository record for Calibration of Alumina-epoxy Nanocomposites Using Piezospectroscopy for the Development of Stress-sensing Adhesives (opens in a new tab)

  5. Characterization of mechanical properties in nanoparticle reinforced hybrid carbon fiber composites using photoluminescence piezospectroscopy

    … tests were conducted with measurements using piezospectroscopy (PS) and concurrent digital image correlation (DIC) to quantify the mechanical property and load distribution between the carbon fiber/epoxy and the reinforcing nanoparticles. The piezospectroscopic data were collected in an …

    ucf Repository record for Characterization of mechanical properties in nanoparticle reinforced hybrid carbon fiber composites using photoluminescence piezospectroscopy (opens in a new tab)

  6. Synchrotron X-Ray Diffraction and Piezospectroscopy used for the Investigation of Individual Mechanical Effects from Environmental Contaminants and Oxide Layer Undulations in Thermal Barrier Coatings

    The durability of Thermal Barrier Coatings (TBCs) used on the turbine blades of aircraft and power generation engines has been known to be affected by sand particle ingression comprised of Calcium-Magnesium-Alumina-Silicate (CMAS). Previous studies have shown that these effects present themselves …

    ucf Repository record for Synchrotron X-Ray Diffraction and Piezospectroscopy used for the Investigation of Individual Mechanical Effects from Environmental Contaminants and Oxide Layer Undulations in Thermal Barrier Coatings (opens in a new tab)

  7. Investigation of the high-temperature mechanical behaviour of oxide-oxide ceramic-matrix composites

    … stresses were quantified using photoluminescence piezospectroscopy.<br/>Materials with different sintering temperatures based on Nextel<sup>TM</sup> 720 fibres displayed average flexural strengths between 55 and 104 MPa when tested at room temperature and 1050 °C. Materials based on …

    bristol Repository record for Investigation of the high-temperature mechanical behaviour of oxide-oxide ceramic-matrix composites (opens in a new tab) Download PDF for Investigation of the high-temperature mechanical behaviour of oxide-oxide ceramic-matrix composites (opens in a new tab)

  8. The use of synchrotron x-ray micro computed tomography to study the failure mechanisms of thermal barrier coatings

    … techniques, such as photo-luminescent piezospectroscopy (PLPS) have aided in furthering the understanding of damage evolution mechanism techniques, but are limited in applicability at temperature. In this work, a new force-balance model is presented for calculating the growth stress in …

    birmingham Download PDF for The use of synchrotron x-ray micro computed tomography to study the failure mechanisms of thermal barrier coatings (opens in a new tab)

  9. Photoluminescence studies of ZnO doped with stable and radioactive impurities

    … is investigated by temperature dependent PL, piezospectroscopy and Zeeman spectroscopy. The centre is donor-like in nature. Uniaxial stress measurements indicate that the defect centre has trigonal symmetry and applied magnetic field measurements reveal the neutral charge state of the centre …

    dcu Download PDF for Photoluminescence studies of ZnO doped with stable and radioactive impurities (opens in a new tab)

  10. Piezospectroscopic Sensing Systems - Multi-Scale and In-Situ Sensing Technology for Structural Integrity

    … for early damage detection. Photoluminescence piezospectroscopy (PS) has demonstrated stress and damage sensing of substrates when coupled with alpha-alumina nanoparticles in a polymer matrix applied as a sensor coating. Alpha phase alumina exhibits photoluminescent spectral emission lines …

    ucf Repository record for Piezospectroscopic Sensing Systems - Multi-Scale and In-Situ Sensing Technology for Structural Integrity (opens in a new tab)

  11. Nondestructive Evaluation of Engine Run Turbine Blades Using Laser Ablation and Photoluminesence Stress Measurements

    … method used involves performing photoluminesent piezospectroscopy (PLPS) to collect R1 and R2 peaks from Cr+3 within the alumina of an underlying thermally grown oxidation (TGO) layer of the TBC system. Strains in this Cr+3 doped alumina shift the peaks, which can then be converted into a stress, …

    uconn-diss Repository record for Nondestructive Evaluation of Engine Run Turbine Blades Using Laser Ablation and Photoluminesence Stress Measurements (opens in a new tab)

  12. Analysis of Residual Stress and Damage Mechanisms of Thermal Barrier Coatings Deposited via PS-PVD and EB-PVD

    … layer is characterized by photoluminescence piezospectroscopy as TGO residual stress is correlated with the lifetime of the coating. Residual stress in the top coat is characterized by Raman spectroscopy, because this stress drives cracking in the top coat that can lead to failure. Scanning …

    ucf Repository record for Analysis of Residual Stress and Damage Mechanisms of Thermal Barrier Coatings Deposited via PS-PVD and EB-PVD (opens in a new tab)

  13. Piezospectroscopic Calibration of Alumina-Nanocomposites for the Development of Stress-Sensing Structures

    Alpha-alumina is known to exhibit photo-luminescent (PL) properties, mainly characteristic R-lines that shift according to applied stress. In addition to showing excellent PL properties, polymers with embedded alumina nanoparticles have been shown to improve the overall composite mechanical …

    ucf Repository record for Piezospectroscopic Calibration of Alumina-Nanocomposites for the Development of Stress-Sensing Structures (opens in a new tab)

  14. ZrB2-SiC Based Ultra High Temperature Ceramic Composites: Mechanical Performance and Measurement and Design of Thermal Residual Stresses for Hypersonic Vehicle Applications

    Ultra-high temperature ceramics (UHTCs), such as ZrB2-based ceramic composites, have been identified as next generation candidate materials for leading edges and nose cones in hypersonic air breathing vehicles. Mechanical performance of ceramic composites play an important role in the ultra-high …

    ucf Repository record for ZrB2-SiC Based Ultra High Temperature Ceramic Composites: Mechanical Performance and Measurement and Design of Thermal Residual Stresses for Hypersonic Vehicle Applications (opens in a new tab)

  15. Load Transfer in an Isolated Particle Embedded within an Epoxy Matrix

    Particulate composites are widely used in many aerospace applications such as protective coatings, adhesives, or structural members of a body and their mechanical properties and behavior have gained increasing significance. The addition of modifiers such as alumina generally leads to improved …

    ucf Repository record for Load Transfer in an Isolated Particle Embedded within an Epoxy Matrix (opens in a new tab)