Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Pile load test"”.
-
STATIC PILE LOAD TEST ANALYSIS
… is presented for the analysis of static pile load test results. The non-linear nature of small strain stiffness for soil is introduced into the finite element analysis of single pile and pile groups. Extensive quasi-nonlinear analyses are carried out to investigate the influence of …
-
Load tests and numerical modeling of CFA and driven piles in marl in Savannah, Georgia
… soil commonly used as a bearing layer for pile foundations. However, two significant engineering challenges arise: unreliable CPT-based estimations of pile resistance and strain-softening behavior complicating the prediction of pile capacity, deformation, and load-transfer mechanisms under …
-
Finite element study on static pile load testing
… which is associated with the conventional static load test and Osterberg-cell test. The commercial FEM code PLAXIS and PLAXIS 3D Foundation were used for the numerical simulation. Simplified models and some case histories for the static pile load test are analyzed to study the effect of reaction …
-
Pile Setup Effects on Driven Piles In Southeastern Coastal States
The resistance of driven piles typically increases with time after installation, a phenomenon known as pile setup. This behavior is primarily associated with the dissipation of excess porewater pressure and the progressive reconsolidation of soil surrounding the pile shaft, particularly it is …
-
Load Transfer Mechanisms for Piles in Soft Soils
The purpose of this thesis is to interpret pile load test data for several instrumented piles to determine the load transfer characteristics of driven piles in soft soils. Piles develop resistance to axial loads through two different mechanisms, side friction and end bearing. The rate that …
-
Centrifuge modeling of single pile subjected to compression and tension in clay
A series of centrifuge model tests was conducted to investigate the behaviour of single pile subjected to compression and tension in clay. The pile loading sequence is varied to investigate the effects of loading direction and loading history. Two newly-developed model piles were fabricated to …
-
Método de estimativa de capacidade de carga de estacas em rochas brandas
… subsidized by empirical methods and conservative load capacity relations, resulting in oversized and expensive works. Project optimization of pile in soft rock requires the determination of strength and deformability parameters of the rock mass, through difficult and costly field investigations, …
-
Provas de carga estática com carregamento lateral em estacas escavadas hélice contínua e cravadas metálicas em areia
… behavior of continuous flight auger (cfa) bored piles and metalic driven H-section piles under lateral loading in cohesionless soils. The piles were tested in two different areas at the same site. Both areas consisted of a 3-m thick compacted superficial fill of pure fine sand, underlain by …
-
A Comparison Of Load Test Data And Predicted Behavior Of Augercast Piles In Layered Soils
… methods of predicting the behavior of ACIP piles in layered soils. As a result, the primary objective of this study is to determine if a significant difference exists between the accepted methods of pile load test analysis. Provided a significant difference is noted, the secondary objective …
-
Calibration of Resistance Factors for Driven Piles using Static and Dynamic Tests
… evolved from Allowable Stress Design (ASD) to Load Factor and Resistance Design (LRFD) which has led to a need to quantify the measures of uncertainty and the level of reliability associated with a project. The measures of uncertainty are quantified by load and resistance factors, while the …
-
Case history of a test pile program for the redevelopment of Newark Airport
A pile load test program was conducted at Newark Airport to determine the most economical piles to be utilized to support the structure in the Redevelopment of Newark Airport. The controlling criteria were the pre-determined design capacity of 50 to 100 tons for the piles and conformance to the …
-
Interação solo-estrutura não linear em fundações de aerogeradores onshore em radier estaqueado: efeitos na análise modal e dinâmica em um aerogerador NREL 5 MW
… when applying dynamic operational and wind loads. Considering this scenario, the present research seeks to study non-linear soil-structure interaction models for analysing wind turbine towers. It was used a wind turbine model from National Research Laboratory (NREL) with nominal power …
-
New methods for interpret the ultimate axial load capacity of driven square concrete piles
Piles are usually designed using analytical methods, empirical models, or dynamic formulas. Because of the uncertainties involved in the analysis and design of pile foundations, it has become customary, and in many cases mandatory, to perform full-scale pile loading tests. Often, the pile load test …
-
Evaluating and Incorporating Site Variability in Different Geotechnical Engineering Applications
… the site variability from cone penetration tests (CPT) and soil boring data, and its implementation into the Load and Resistance Factor Design (LRFD) formulation. The total Coefficient of Variation (COVR,total) for each site was estimated from COVR,spatial (Spatial Coefficient of Variation) …
-
Full-Scale Testing of Blast-Induced Liquefaction Downdrag on Auger-Cast Piles in Sand
Deep foundations like auger-cast piles and drilled shafts frequently extend through liquefiable sand layers and bear on non-liquefiable layers at depth. When liquefaction occurs, the skin friction on the shaft decreases to zero, and then increases again as the pore water pressure dissipates and the …
-
Analysis of a caliche stiffened pile foundation
… are founded on either a large mat or a long pile foundation. Recently, a new foundation type consisting of a short pile system bonded to shallow cemented layers was utilized for a large high rise building in Las Vegas and settlements during construction were recorded. The bonding of caliche …
-
Load-Deflection Characteristics of Laterally Loaded Large Diameter Piles
… onshore, the total use of large diameter monopiles is roaring and expected to grow faster for the world to continue combating climate change and urbanization. The objective of this study is to address the applicability of using P-y curves for the design of large diameter pile foundation in …
-
Spiral Welded Pipe Piles For Structures In Southeastern Louisiana
… to. Historically, USACE has used concrete piles or steel H-piles as the foundations for these structures. Because of the magnitude of obtaining 100-year level hurricane protection, limited resources, and a condensed timeline, spiral welded pipe piles can be manufactured as an alternative to …
-
Deep Energy Foundations: Geotechnical Challenges and Design Considerations
… required for installation. Because Energy Piles perform the dual function of exchanging heat and providing structural support, and are only installed at sites where pile foundations are already required, these systems provide the thermal performance of deep geothermal systems without the …
-
Advancements in Rapid Load Test Data Regression
… for deficiencies in present analyses. As load test results are generally considered as the basis of performance from which foundations can be designed, it is imperative that the analyzed load test data be as accurate as possible. In an attempt to progress the state of load test data …
Page 1 of 2