Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1519 for “"Piles"”.

  1. The behavior of laterally loaded single piles and group piles in sand

    … response of laterally loaded single and group piles in sand. A single surface, isotropic hardening constitutive model with nonassociative flow rule is used to model the behavior of sand. The purpose of the study is to gain a better understanding of the soil and pile behavior of laterally loaded …

    uiuc Repository record for The behavior of laterally loaded single piles and group piles in sand (opens in a new tab)

  2. Piles and pile driving

    This thesis on the subject of ""Piles and Pile Driving"" has been written to fulfill one of the requirements for the granting of the degree of Civil Engineer by the Newark College of Engineering. The material contained in this thesis has been gleaned from many books, catalogs, magazines and from …

    njit Repository record for Piles and pile driving (opens in a new tab)

  3. Installation Effects of Non-Displacement Piles - A study of installation-induced soil displacements from drilled steel tube piles and cast-in-place piles

    … effects of two types of non-displacement piles; drilled steel tube piles and cast-in-place piles. For drilled steel tube piles, a qualitative interview study was conducted with indus try professionals, supported by numerical simulations in Plaxis 2D to assess the impact of soil volume loss …

    chalmers Repository record for Installation Effects of Non-Displacement Piles - A study of installation-induced soil displacements from drilled steel tube piles and cast-in-place piles (opens in a new tab)

  4. Behavior of integral abutment piles

    … Knoxville. The project involved five steel H-piles to be driven into ground with integral abutment slabs cast on top.</p> <p>The first four piles were instrumented with weldable strain gages and pressure sensors, while the last pile was only instrumented with weldable strain gages. A slow …

    ut-knoxville Repository record for Behavior of integral abutment piles (opens in a new tab)

  5. Thermal Characterization of Firebrand Piles

    … designed to capture heating from firebrand piles and the process of ignition were conducted using laboratory-fabricated cylindrical wooden firebrands. The methodology compares two heat flux measurement methods. Experimental results compare the effects of varying firebrand diameter, pile …

    maryland Repository record for Thermal Characterization of Firebrand Piles (opens in a new tab)

  6. Breaking wave forces on piles

    … structures makes the study cf wave loading on piles of significant practical importance. The interaction between non-breaking waves and vertical cylinders which pierce the surface has received much attention. However, rational design criteria for these structures subject to breaking waves is …

    unsw Repository record for Breaking wave forces on piles (opens in a new tab)

  7. Dynamic response of laterally-loaded piles

    The laterally-loaded pile has long been a topic of research interest. Several models of the soil surrounding a pile have been developed for simulation of lateral pile behavior, ranging from simple spring and dashpot models to sophisticated three-dimensional finite-element models. However, results …

    texas Repository record for Dynamic response of laterally-loaded piles (opens in a new tab)

  8. Behavior of piles supporting integral abutments

    <p>Steel H-piles are commonly used to support integral abutments. In the absence of expansion joints that allow the superstructure to expand and contract freely, piles supporting integral abutments are subjected to lateral displacement, horizontal shear, and bending moment. Data are presented in …

    utk-theses Repository record for Behavior of piles supporting integral abutments (opens in a new tab)

  9. Thermo-mechanical aspects of energy piles

    Energy piles are deep foundations which belong to the category of shallow geothermal systems and have the double role of structural support and geothermal heat exchangers. A system of pipes embedded into the concrete with a heat carrier fluid circulating through them allows exchanging heat with the …

    poli-torino Repository record for Thermo-mechanical aspects of energy piles (opens in a new tab)

  10. Buckling Loads for Partially Embedded Piles

    Piles are common structural elements used to transmit loads through weak or compressible surface soils to lower, more suitable soil strata. They are relatively small diameter shafts that are forced into the ground. Typical examples of pile utilization can be found at nearly any site where a major …

    sdstate Repository record for Buckling Loads for Partially Embedded Piles (opens in a new tab)

  11. Corrosion Performance of Concrete Cylinder Piles

    Concrete cylinder piles produced by a centrifugally cast, vibrated, roller compacted process have shown promising corrosion durability in marine environments. Three bridges in the Florida Panhandle with approximately 40 years of service in aggressive marine service were examined. A newly …

    usf Repository record for Corrosion Performance of Concrete Cylinder Piles (opens in a new tab)

  12. Energy Piles in Cooling Dominated Climates

    … thermal control of a building using foundation piles. Outside air temperature changes with the season, while ground temperature remains moderate and constant. In summer, ground temperature is lower than air temperature, and so the ground may be used as a heat sink. The opposite is true in …

    tamu Repository record for Energy Piles in Cooling Dominated Climates (opens in a new tab)

  13. Probabilistic analysis of laterally loaded piles

    Includes bibliographical references (pages 66-74).

    colo-mines Repository record for Probabilistic analysis of laterally loaded piles (opens in a new tab)

  14. Predicting the capacity of pulse piles

    Pulse piles have been successfully used in geotechnical construction for last 25 years. This type of mini piles has proved to be very useful on the restricted access sites and provide a cost effective solution in comparison to the conventional piling techniques. The shockwave created by an electric …

    whiterose Download PDF for Predicting the capacity of pulse piles (opens in a new tab)

  15. Behavior of Batter Piles in Sand

    … p-multiplier method proposed for the vertical piles. Average values of the p-multipliers appropriate for the small batter pile groups in sand were suggested. Investigations of various pile-to-pile cap connections for the prestressed concrete piles using full-scale static experimental results …

    uiuc Repository record for Behavior of Batter Piles in Sand (opens in a new tab)

  16. Driven piles in central Texas expansive soils

    … is under utilized in this application, driven piles. The main objective of the study is to present pile test results and analysis from four driven pile project sites in three types of expansive soils found in central Texas: Del Rio formation, Taylor/Navarro formation, and expansive alluvium. …

    texas Repository record for Driven piles in central Texas expansive soils (opens in a new tab)

Page 1 of 76