Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Pillar Stability"”.

  1. Design considerations for longwall yield pillar stability

    … mine closures. Current application of yield pillars shows that it can prevent coal bumps in some Longwall mines. In this dissertation, the need for a new method to design yield pillars in bump prone conditions is established. In order to fulfill this need, a PC-design program based on finite …

    wvu Repository record for Design considerations for longwall yield pillar stability (opens in a new tab)

  2. Improving Rock Pillar Stability Guidelines Through Detailed Numerical Investigation

    Pillar stability guidelines, for underground construction in rock, have been presented by various authors in the past, based on a combination of empirical (mostly visual) observations from mining applications and simple numerical elastic stress indices or data from continuum plasticity analysis. …

    queens Repository record for Improving Rock Pillar Stability Guidelines Through Detailed Numerical Investigation (opens in a new tab)

  3. Integrated Large Discontinuity Factor, Lamodel and Stability Mapping Approach for Stone Mine Pillar Stability

    … the impact of the large discontinuities on local pillar stability. National Institute for Occupational Safety and Health (NIOSH) published design guidelines for underground stone mines to guide the industry in designing pillar and roof support. These guidelines emphasize the impact of large, …

    wvu Repository record for Integrated Large Discontinuity Factor, Lamodel and Stability Mapping Approach for Stone Mine Pillar Stability (opens in a new tab)

  4. INVESTIGATION OF LONG TERM PILLAR STABILITY IN AN ABANDONED GYPSUM MINE BASED ON DISSOLUTION MODELS

    … initial flooding resulted in saturating the mine pillars along with some amount of pillar dissolution. Overtime, gypsum dissolution would cease as the water becomes saturated with the gypsum dissolution products. The mine, however, is located adjacent to the Grand River and has groundwater moving …

    mtu Repository record for INVESTIGATION OF LONG TERM PILLAR STABILITY IN AN ABANDONED GYPSUM MINE BASED ON DISSOLUTION MODELS (opens in a new tab)

  5. Enhancing Pillar Stability Assessment in Underground Limestone Mines Using LaModel: Integrating Empirical Strength Equations for Improved Ground Control

    … failures, particularly those involving massive pillar collapses and roof falls, pose significant safety hazards, contributing to 40% of fatalities and 15% of lost workdays since 2006. Several massive pillar collapses have occurred in active limestone mines from 2015 to 2021, and a fatal incident …

    wvu Repository record for Enhancing Pillar Stability Assessment in Underground Limestone Mines Using LaModel: Integrating Empirical Strength Equations for Improved Ground Control (opens in a new tab)

  6. Development of empirical rib pillar design criterion for open stope mining

    The design of open stope rib pillars has been done using many empirical methods, but none of the methods has been verified with a design survey. This thesis uses data collected in the "Integrated Mine Design Study" to develop an empirical rib pillar design method for open, stope mining. The method …

    ubc Repository record for Development of empirical rib pillar design criterion for open stope mining (opens in a new tab) Download PDF for Development of empirical rib pillar design criterion for open stope mining (opens in a new tab)

  7. New Abutment Angle Concept for Underground Coal Mining

    In the Analysis of Retreat Mining Pillar Stability (ARMPS), Analysis of Longwall Pillar Stability (ALPS) and LaModel programs, the magnitude of the abutment loading adjacent to a gob area is calculated using an "abutment angle" concept, and the extent of the abutment loading is determined as solely …

    wvu Repository record for New Abutment Angle Concept for Underground Coal Mining (opens in a new tab)

  8. Optimizing secondary tailgate support selection

    … United States. The ALPS (Analysis of Long wall Pillar Stability) program was used to determine adequacy of pillar design for the successful longwall case histories. A relationship was developed between the secondary support density necessary to maintain a stable tailgate entry during mining and …

    vt Repository record for Optimizing secondary tailgate support selection (opens in a new tab)

  9. Design and stability of barrier pillars in longwall mining

    … geology, mining depth and mine-layout on barrier pillar stability was examined and design guidelines for determining sizes for such pillars were established using the "pillar core concept". The yield zone was better estimated by the use of the Coulomb failure/strength approach than the …

    vt Repository record for Design and stability of barrier pillars in longwall mining (opens in a new tab)

  10. Using wave attenuation techniques for monitoring of stress levels

    Stress can have a significant effect on the stability of pillars. To get an accurate picture of pillar stability, information is needed not only on the initial stress magnitude and distribution but also on all subsequent stress changes. Sonic methods have the potential to be among the fastest, most …

    vt Repository record for Using wave attenuation techniques for monitoring of stress levels (opens in a new tab)

  11. Structural Design Guidelines For Longwall Panel Layout.

    … up in the face powered supports, and (2) chain pillars are designed in such a way that panel entries are well protected and interactions between adjacent panels are minimized. A clear understanding of strata behavior around longwall panels due to face movement is, therefore, the foremost …

    wvu Repository record for Structural Design Guidelines For Longwall Panel Layout. (opens in a new tab)

  12. Hard rock pillar strength estimation an applied empirical approach

    Pillars are present in all hard rock mining operations and in order to effectively design these pillars, an estimate of the pillar strength is required. Two new pillar strength estimation methods for hard rock mine pillars are presented in this thesis. 31 pillar case histories of the database that …

    ubc Repository record for Hard rock pillar strength estimation an applied empirical approach (opens in a new tab) Download PDF for Hard rock pillar strength estimation an applied empirical approach (opens in a new tab)

  13. Machine Learning Analysis of Cave Mine Pillar Collapses

    … mining environments will also encounter critical stability challenges. Stability evaluation in rock engineering relies on approaches like rock mass classification systems, empirical methods, and numerical modelling which are widely adopted in mining. Nevertheless, caving-related critical phenomena …

    queens Repository record for Machine Learning Analysis of Cave Mine Pillar Collapses (opens in a new tab)

  14. INVESTIGATION INTO MINE PILLAR DESIGN AND GLOBAL STABILITY USING THE GROUND REACTION CURVE CONCEPT

    Pillars form an important support structure in any underground mine. A bulk of the overburden load is borne by the mine pillars. Thus, the strength of pillars has been a subject of detailed research over more than 6 decades. This work has led to the development of largely empirical pillar design …

    uky-thes Repository record for INVESTIGATION INTO MINE PILLAR DESIGN AND GLOBAL STABILITY USING THE GROUND REACTION CURVE CONCEPT (opens in a new tab)

  15. The Effect of Natural Fractures on the Mechanical Behavior of Limestone Pillars: A Synthetic Rock Mass Approach Application

    … strong rock and experience good ground stability. Also, modern pillar design guidelines developed by National Institute for Occupational Safety and Health (NIOSH) have improved the design of stable layouts for modern limestone mines. However, ground control-related incidents are still an …

    wvu Repository record for The Effect of Natural Fractures on the Mechanical Behavior of Limestone Pillars: A Synthetic Rock Mass Approach Application (opens in a new tab)

  16. Comparative geomechanical investigation of empirical, analytical, and numerical methods utilized in designing flat-roof excavations in discontinuous and laminated rockmasses

    … mining conditions that control local and global stability. Model complexity and scale is increased incrementally, and model results are compared to existing, well-established analytical and empirical methods to validate, confirm, or frame the implications of the numerical results and their …

    colo-mines Repository record for Comparative geomechanical investigation of empirical, analytical, and numerical methods utilized in designing flat-roof excavations in discontinuous and laminated rockmasses (opens in a new tab)

  17. Investigation Of Spalling Effects on The Brittle Behavior of Rectangular Pillars in Underground Stone Mines

    … These events, especially those involving slender pillars, underscore that traditional methods often fail to account for progressive, spalling-dominated failure, highlighting a crucial gap in our understanding. This research addresses this issue by conducting a comprehensive investigation into the …

    wvu Repository record for Investigation Of Spalling Effects on The Brittle Behavior of Rectangular Pillars in Underground Stone Mines (opens in a new tab)