Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"Pillar Strength"”.

  1. Hard rock pillar strength estimation an applied empirical approach

    Pillars are present in all hard rock mining operations and in order to effectively design these pillars, an estimate of the pillar strength is required. Two new pillar strength estimation methods for hard rock mine pillars are presented in this thesis. 31 pillar case histories of the database that …

    ubc Repository record for Hard rock pillar strength estimation an applied empirical approach (opens in a new tab) Download PDF for Hard rock pillar strength estimation an applied empirical approach (opens in a new tab)

  2. Implementing the Empirical Stone Mine Pillar Strength Equation into the Boundary Element Method Software LaModel

    … stress into the interior of a stone mine pillar, as a function of the pillar width-to-height ratio, is derived from the empirical pillar strength equation proposed by Esterhuizen et al. (2011). The gradient stress equations for the stone mine pillars were derived by following similar …

    wvu Repository record for Implementing the Empirical Stone Mine Pillar Strength Equation into the Boundary Element Method Software LaModel (opens in a new tab)

  3. A Risk-Based Pillar Design Approach for Improving Safety in Underground Stone Mines

    The collapse of a mine pillar is a catastrophic event with great consequences for a mining operation. These events are not uncommon, and have been reported to produce air blasts able to knock down, seriously injury or kill miners; cause cascade pillar failures which involve the collapse of …

    vt Repository record for A Risk-Based Pillar Design Approach for Improving Safety in Underground Stone Mines (opens in a new tab)

  4. The Effect of Natural Fractures on the Mechanical Behavior of Limestone Pillars: A Synthetic Rock Mass Approach Application

    … experience good ground stability. Also, modern pillar design guidelines developed by National Institute for Occupational Safety and Health (NIOSH) have improved the design of stable layouts for modern limestone mines. However, ground control-related incidents are still an important problem. In …

    wvu Repository record for The Effect of Natural Fractures on the Mechanical Behavior of Limestone Pillars: A Synthetic Rock Mass Approach Application (opens in a new tab)

  5. Investigation of underground mine pillar design procedures

    The principal functions of underground mine pillars are to stabilize openings and to carry the load of overlying rock strata. They are often (partially or completely) recovered at a later stage when their stabilizing effect is no longer required. For economic reasons, an optimum-sized pillar is the …

    ubc Repository record for Investigation of underground mine pillar design procedures (opens in a new tab) Download PDF for Investigation of underground mine pillar design procedures (opens in a new tab)

  6. Development of empirical rib pillar design criterion for open stope mining

    The design of open stope rib pillars has been done using many empirical methods, but none of the methods has been verified with a design survey. This thesis uses data collected in the "Integrated Mine Design Study" to develop an empirical rib pillar design method for open, stope mining. The method …

    ubc Repository record for Development of empirical rib pillar design criterion for open stope mining (opens in a new tab) Download PDF for Development of empirical rib pillar design criterion for open stope mining (opens in a new tab)

  7. The use of fracture mechanics to predict the stress distribution in coal mine pillars.

    … predicts the stress distribution in coal mine pillars. This approach uses an analytic equation to predict stress and yield characteristics; so, in some respects, it is as accurate as numerical modeling. It uses fracture mechanics to model many structures including longwall gob, yield pillars, …

    wvu Repository record for The use of fracture mechanics to predict the stress distribution in coal mine pillars. (opens in a new tab)

  8. Applications and Development of Intelligent UAVs for the Resource Industries

    … digitization, such as geotechnical analysis and pillar strength analysis. This research also features an applied use case of custom drones built to detect methane leaks at natural gas production and distribution sites.

    vt Repository record for Applications and Development of Intelligent UAVs for the Resource Industries (opens in a new tab)

  9. Pillar design for St. Peter sandstone formation

    … to extract St. Peter Sandstone. The room and pillar mining method has been successfully used for St. Peter Sandstone mining in a few US locations, however, no one has proposed a rigorous pillar design method. The goal of this research is to: (1) elucidate factors contributing to ground control …

    must-thes Repository record for Pillar design for St. Peter sandstone formation (opens in a new tab)

  10. Fabrication of Micro Pillar Arrays Via Aerosol Jet Printing

    … to fabricate 3D structures such as ceramic micro-pillars. Direct write printing processes can print high resolution structures in the micron or sub-micron range. These structures find their applications in 3D Micro-Electro Mechanical Systems (MEMS), ultra-sound and thermal imaging, heat exchangers …

    rit Repository record for Fabrication of Micro Pillar Arrays Via Aerosol Jet Printing (opens in a new tab)

  11. Bump control design protocol for room-and-pillar retreat mining

    … are the explosive failure of highly stressed pillars. The protocol was developed for room-and-pillar retreat mining conducted with available continuous miner technology. The inability of existing coal pillar equations to accurately represent the wide total extraction pillars required, forced …

    vt Repository record for Bump control design protocol for room-and-pillar retreat mining (opens in a new tab)

  12. Comparative geomechanical investigation of empirical, analytical, and numerical methods utilized in designing flat-roof excavations in discontinuous and laminated rockmasses

    … stress ratio, as well as material stiffness, strength, and anisotropy. Model inputs are utilized to assign a Coal Mine Roof Rating (CMRR) value to each model case, and the Analysis of Roof Bolt Systems (ARBS) is subsequently used to assess the reliability of the model results and focus future …

    colo-mines Repository record for Comparative geomechanical investigation of empirical, analytical, and numerical methods utilized in designing flat-roof excavations in discontinuous and laminated rockmasses (opens in a new tab)

  13. Integrated Large Discontinuity Factor, Lamodel and Stability Mapping Approach for Stone Mine Pillar Stability

    … the impact of the large discontinuities on local pillar stability. National Institute for Occupational Safety and Health (NIOSH) published design guidelines for underground stone mines to guide the industry in designing pillar and roof support. These guidelines emphasize the impact of large, …

    wvu Repository record for Integrated Large Discontinuity Factor, Lamodel and Stability Mapping Approach for Stone Mine Pillar Stability (opens in a new tab)

  14. Analysis of the Brittle Failure Mechanism of Underground Stone Mine Pillars by Implementing Numerical Modeling in FLAC3D

    The room and pillar mining method is the most commonly utilized method for extracting minerals found in flat-lying stratiform, and it has been used in the majority of underground stone mines in the United States (Esterhuizen et al., 2011), as a consequence, it is a primary topic of study in the …

    wvu Repository record for Analysis of the Brittle Failure Mechanism of Underground Stone Mine Pillars by Implementing Numerical Modeling in FLAC3D (opens in a new tab)

  15. Investigating pillar failure mechanism and pillar-support interaction using large-scale laboratory tests and bonded block models

    Underground mining methods such as room & pillar and sublevel open stoping use pillars to provide natural stability to mine openings, ensuring the safety of workers and machinery. While extensive research has focused on pillar failure mechanics and safe design layouts, there are few studies that …

    colo-mines Repository record for Investigating pillar failure mechanism and pillar-support interaction using large-scale laboratory tests and bonded block models (opens in a new tab)

  16. Optimizing Pillar Design for Improved Stability and Enhanced Production in Underground Stone Mines

    … mass behavior for maximizing safety. Optimizing pillar design is essential for preventing hazardous incidents and improving production in room-and-pillar mines. Maintaining regional and global stability is complicated for underground carbonate or stone deposits, where extensive fracture networks …

    vt Repository record for Optimizing Pillar Design for Improved Stability and Enhanced Production in Underground Stone Mines (opens in a new tab)

  17. Enhancing Pillar Stability Assessment in Underground Limestone Mines Using LaModel: Integrating Empirical Strength Equations for Improved Ground Control

    … failures, particularly those involving massive pillar collapses and roof falls, pose significant safety hazards, contributing to 40% of fatalities and 15% of lost workdays since 2006. Several massive pillar collapses have occurred in active limestone mines from 2015 to 2021, and a fatal incident …

    wvu Repository record for Enhancing Pillar Stability Assessment in Underground Limestone Mines Using LaModel: Integrating Empirical Strength Equations for Improved Ground Control (opens in a new tab)

  18. Advancing continuum and discontinuum models of brittle rock damage and rock-support interaction

    … techniques through which the mechanisms of pillar damage can be accurately interpreted and supports can be designed to control the anticipated displacements along pillar boundaries. With advancement in numerical modeling techniques, it is now possible to study such rock mechanics problems in …

    colo-mines Repository record for Advancing continuum and discontinuum models of brittle rock damage and rock-support interaction (opens in a new tab)