Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"Pilot Line"”.
-
The Remote Measurement of Phase Angle
… indication, The system may be used either with pilot lines or a radio link between substations and Control Room, An advantage is that the route of a pilot line may be changed without affecting the accuracy, thus allowing the use of public telephone lines, if necessary. A pilot line system has …
-
Fabrication and evaluation of advanced carbon- reinforced composite materials with emphasis on novel reinforcement modification technologies
… 50 × 50 cm fabrics and finally to a continuous pilot line. Optimised electropolymerisation increased the oxygen-containing functional groups on CFs and improved wettability and surface energy. These modifications resulted in substantial mechanical performance gains, with the interlaminar shear …
-
An investigation of bicomponent polypropylene/poly(ethylene terephthalate) melt blown microfiber nonwovens
… relationships, and spinline dynamics. It was conducted in the 24-inch Reicofil® MB pilot line with bicomponent MB capability.</p>
-
An investigation of bicomponent polypropylene/poly(ethylene terephthalate) melt blown microfiber nonwovens
… relationships, and spinline dynamics. It was conducted in the 24-inch Reicofil® MB pilot line with bicomponent MB capability.</p>
-
Development and characterisation of a process technology for a 0.25µm SiGe:C RF-BiCMOS embedded flash memory
… and describes the implementation into a process pilot line. The principle process flow and important process steps are described in detail, reviewing also the impact on the original BiCMOS process. The results are assessed geometrically by means of electron microscopy and electrically by …
-
Investigation of advanced light trapping concepts for plasma-deposited solid phase crystallised polycrystalline silicon thin-film solar cells on glass
… thin-film cells by over 60 %, is scaled up to pilot line scale glass sheets and a phenomenological model is proposed for the AIT process. The Jsc of poly-Si thin-film solar cells on AIT glass is shown to increase by 6.6 % when the glass thickness is reduced from 3 to 0.5 mm. Plasma etching of …
-
Design and Control of Close Proximity Indirect Exposure for Nonthermal Atmospheric Pressure Plasma-Based Oxidation of Carbon Fiber Precursor
… was scaled from the benchtop level to the small pilot line scale of 1 annual metric tons of throughput. The author was directly responsible for inventing a new plasma processing method, developing the theory behind it, designing and implementing the plasma generation system, and integrating it …
-
A study of the forming limits of cold and hot forming of aluminium alloy sheets with multi-point tooling
… facility and integrating it into a pilot prototype production line. The fundamental and process studies combined with the two test cases, deep drawing and stretch forming with multi-point tooling, suggest a feasible alternative route for the forming of lightweight high-strength …
-
Fabrication and Characterization of Novel 2SSS CIGS Thin Film Solar Cells for Large-Scale Manufacturing
… are going to serve as the test bed for the pilot line that is intended to be installed at USF's research campus soon. The finished solar cells were characterized. The scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) were some of the …
-
The Introduction of Group Technology Via Coding Techniques:A case study
… The practical aspects of introducing a 'pilot line' are described -along with am evaluation of the resulting introduction. The value of the Opitz Codes an aid to production is critically examined with rotational components, reference being made to practical code interpretations, and its …
-
Spunbonding studies with polypropylene polymers
… was conducted using the Reicofil spunbonding pilot line at the University of Tennessee, Knoxville. The filaments at three different throughput rates were studied for tensile properties and other structural features such as birefringence, x-ray diffraction and thermal responses. The fabrics …
-
A study of thermal bonding of melt blown and spunbonded laminates and repellent finishing techniques
… melt blown webs produced on the melt blown pilot line at DTK were laminated with an experimental point bonded spunbonded polypropylene fabric obtained from Du Font. Polypropylene melt blown and spunbonded laminate samples were thermally bonded with a smooth roll calender both before and …
-
Κατεργασία λιγνοκυτταρινούχας βιομάζας με τη χρήση καινοτόμων φυσικοχημικών διεργασιών για την παραγωγή νανοσωματιδίων λιγνίνης
… nanoparticles (LNPs) at both laboratory and pilot scale, using an environmentally friendly process based on ultrasonication treatment and water as the sole dispersion medium, avoiding the use of organic solvents. The resulting LNPs were incorporated into polylactic acid (PLA) based composites …
-
Heterogeneous photocatalysis for water and air depollution
… to a volume of 5 L and deposited with a pilot line on stainless steel. The produced coating was characterized and compared to the laboratory material to show the successful operation of up-scaling. In second part, the aqueous synthesis was adapted to produce TiO2 catalysts doped with …
-
Essays on knowledge management
… activities conducted concurrently: prototyping, pilot line testing, and production ramp-up. I capture the link between successive stages of engineering activities by recognizing that knowledge accumulated in one stage and transferred to another stage improves the efficiency of knowledge …
-
A Fundamental Investigation of the Effects of Die Geometry and Process Variables on Fiber Diameter and Quality of Melt Blown Polypropylene Webs
… the webs were studied during phase I. The 6-inch pilot line at UTK was used to melt blow a series of homopolypropylene resins provided by Exxon Chemical Company.</p> <p>Statistical techniques used to analyze the data in Phase I concluded that polymer throughput was the only variable to have an …
-
Process Property Studies of Melt Blown Thermoplastic Polyurethane Polymers
… (FTIR) and etc.</p> <p>The 6-inch MB line and the 20-inch wide Accurate Products MB pilot line at the Textiles and Nonwovens Development Center (TANDEC), The University of Tennessee, Knoxville, were utilized for this study. Preliminary MB studies were performed with Noveon …
-
On the Effects of Moisture on Polymer-Based Electrochromic Devices
… chemical in-situ polymerization process on a R2R-pilot line in an industrially relevant environment. The R2R-processed PEDOTEthC6 half-cells were characterized in detail and provide enhanced electrochromic properties in terms of visible light transmittance and color neutrality in the bright state …
-
Hydrodynamic self-excited vibrations in leaking spherical valves with annular seal
… as a mobile structural element and an auxiliary pilot conduit to govern the tightness of the seal. The seal was modeled as a second order mechanical system subject to fluid-dynamic pressure forces, whereas each duct in the system was represented by the basic equations of continuity and energy …