Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 67 for “"Pin Fins"”.

  1. Cavitation and Heat Transfer Over Micro Pin Fins

    … from failure. One solution is to use innovative pin finned heat sinks. This research is centered on the evaluation of hydrodynamic cavitation properties downstream pin fins and extended toward single-phase heat transfer enhancement of array of pin fins in microchannel. In this work, transparent …

    ucf Repository record for Cavitation and Heat Transfer Over Micro Pin Fins (opens in a new tab)

  2. Heat Transfer from Low Aspect Ratio Pin Fins

    … gas turbines is limited by thermal management. Pin fins are commonly used to augment heat transfer by increasing surface area and increasing turbulence. The present research is focused on but not limited to internal cooling of turbine airfoils using pin fins. Although the pin fins are not …

    vt Repository record for Heat Transfer from Low Aspect Ratio Pin Fins (opens in a new tab)

  3. Characterization, Modeling, and Optimization of Polymer Composite Pin Fins

    … optimization of orthotropic polymer composite fins used in electronic heat sinks. Morphological characterization and thermal conductivity measurements of thermally conductive Poly-Phenylene Sulphide composites are used to determine the significant directional thermal conductivity in such …

    maryland Repository record for Characterization, Modeling, and Optimization of Polymer Composite Pin Fins (opens in a new tab)

  4. Numerical Investigation and Optimization of Pin Fins in Micro Heat Sinks

    … sinks, including cylinder and hydrofoil shaped pin fins. Following the validation phase, optimization has been performed to further improve the hydraulic and thermal performance. DOE study showed that the chord length and leading edge size of the hydrofoil pin fin are significant contributors to …

    ucf Repository record for Numerical Investigation and Optimization of Pin Fins in Micro Heat Sinks (opens in a new tab)

  5. Tip Clearance Effect on Convective Heat Transfer in Micro Scale Pin Fins

    … in a microchannel with single and array of pin fins have been studied. For the single pin fin case, a microchannel with a 150-µm diameter pin fin with a tip clearance was experimentally and numerically studied for three Reynolds numbers in laminar regime. Tip clearances of 0, 30, 45 and 100 …

    ucf Repository record for Tip Clearance Effect on Convective Heat Transfer in Micro Scale Pin Fins (opens in a new tab)

  6. Heat Transfer from Multiple Row Arrays of Low Aspect Ratio Pin Fins

    … heat transfer characteristics through arrays of pin fins were studied for the further development of internal cooling methods for turbine airfoils. Low aspect ratio pin fin arrays were tested through a range of Reynolds numbers between 5000 and 30,000 to determine the effects of pin spacing as …

    vt Repository record for Heat Transfer from Multiple Row Arrays of Low Aspect Ratio Pin Fins (opens in a new tab)

  7. Flow Structure Characterization and Performance Evaluation of Pin Fins Produced Using Cold Spray

    … a thick external shell deposited by cold spray. Fins are then machined in this external shell, creating a heat exchanger. Net shaped pin fins were successfully deposited using Cold Gas Dynamic Spraying (CGDS or simply cold spray) as an additive manufacturing technique to replace the plate fin …

    ottawa-retro Repository record for Flow Structure Characterization and Performance Evaluation of Pin Fins Produced Using Cold Spray (opens in a new tab)

  8. Flow boiling of R245fa in microgaps with staggered circular and hydrofoil pin fins

    … foggy, and slug flows that are generated in the pin finned area. The surface temperature values are calculated based on the obtained heaters temperature data and are plotted against the dissipated power for a wide range of heat flux for each experiment. An uncertainty analysis is also performed …

    gatech Repository record for Flow boiling of R245fa in microgaps with staggered circular and hydrofoil pin fins (opens in a new tab)

  9. Development of a Methodology to Measure Aerodynamic Forces on Pin Fins in Channel Flow

    … promise in both of these industries. Although pin fins are often placed in the cooling channels to augment heat transfer, their addition comes at the expense of increased pressure drop. Consequently, the pin fin geometry must be judiciously chosen to achieve the desired heat transfer rate while …

    vt Repository record for Development of a Methodology to Measure Aerodynamic Forces on Pin Fins in Channel Flow (opens in a new tab)

  10. Experimental Study of Heat Transfer and Pressure Drop Over an Array of Short Micro Pin Fins

    … heat dissipation from the chip surface. Micro pin fins have been gaining recognition as a highly favorable surface enhancement due to the design versatility it provides in the form of myriad geometric shapes and fin arrangements as opposed to convention microchannels. The micro pin fins …

    rit Repository record for Experimental Study of Heat Transfer and Pressure Drop Over an Array of Short Micro Pin Fins (opens in a new tab)

  11. Experimental and numerical study of water single-phase pressure drop across an array of circular micro-pin-fins

    … flow across an array of staggered micro-pin-fins having circular cross-section. The micro-pin-fins are micro-end milled out of oxygen free copper and have the following dimensions: 180 micron diameter and 683 micron height. The longitudinal pitch and transverse pitch are equal to 399 …

    hawaii Repository record for Experimental and numerical study of water single-phase pressure drop across an array of circular micro-pin-fins (opens in a new tab)

  12. Flow boiling of water in pin-fin enhanced microgap

    … with the same height of 200 μm, one with sparse pin fins, and the other with dense pin fins, were studied and compared. The transverse and longitudinal pitches were both 400 μm for the microgap with sparse pin fins, and were both 200 μm for the one with dense pin fins. The pins were circular with …

    gatech Repository record for Flow boiling of water in pin-fin enhanced microgap (opens in a new tab)

  13. Numerical and experimental study of the performance of a drop-shaped pin fin heat exchanger

    … heat exchanger (CHE) designed with drop-shaped pin fins. A numerical study using ANSYS was first conducted to select the optimum pin shape and configuration for the CHE. This was followed by an experimental study to validate the numerical model. The results indicate that the drop shaped pin fins …

    nps Repository record for Numerical and experimental study of the performance of a drop-shaped pin fin heat exchanger (opens in a new tab)

  14. Energy Efficient Two-Phase Cooling for Concentrated Photovoltaic Arrays

    … flow boiling in mini/microchannels and micro pin fin arrays will be explored as a possible CPV cooling technique. The most energy efficient microchannel design is chosen based on a least-material, least-energy analysis. Heat transfer and pressure drop obtained in micro pin fins will be …

    maryland Repository record for Energy Efficient Two-Phase Cooling for Concentrated Photovoltaic Arrays (opens in a new tab)

  15. Numerical Investigation of Flow and Heat Transfer Characteristics in Rectangular Channels (AR=4:1) with Circular and Elliptical Pin Fin Arrays

    … channel (AR=4:1) with circular and elliptical pin fin arrays. Two types of elliptical pin fins (a SEF and an N fin whose minor axis length is equal to the diameter of the circular fin) were used. The analysis was performed with an array of six rows of staggered pin fins in the streamwise …

    tamu Repository record for Numerical Investigation of Flow and Heat Transfer Characteristics in Rectangular Channels (AR=4:1) with Circular and Elliptical Pin Fin Arrays (opens in a new tab)

  16. Powder Recycling for the Production of Pin Fin Heat Sinks by Cold Gas Dynamic Spray

    … of today’s personal computers, water cooled pin fin heat sinks are increasingly being employed for the cooling of graphical processing units. Currently, these high performance devices are manufactured through high-cost, high-waste processes. In recent years, a new solution has emerged using …

    ottawa-retro Repository record for Powder Recycling for the Production of Pin Fin Heat Sinks by Cold Gas Dynamic Spray (opens in a new tab)

  17. Development of an Optimization Tool for the Geometry of Integrated Power Module Pin Fin Arrays Employed in Electrified Vehicles

    … and compatible with system requirements. Pin fins are a reliable and effective means of augmenting heat transfer. They rely on inducing turbulence, increasing the effective wetted surface, and accelerating fluid velocity. Unavoidably the pin fin array also produces an undesirable pressure …

    mcmaster Repository record for Development of an Optimization Tool for the Geometry of Integrated Power Module Pin Fin Arrays Employed in Electrified Vehicles (opens in a new tab)

  18. Evaluation of the effects of roll angle on the natural convection heat transfer from an array of cylindrical spines

    … heat transfer from an array of cylindrical spines or pin fins. A correlation is presented that permits evaluation of the Nusselt Modulus as a function of the Rayleigh Modulus and the roll angle and it shows that maximum heat transfer is obtained at roll angles between 20 and 30 degrees.

    nps Repository record for Evaluation of the effects of roll angle on the natural convection heat transfer from an array of cylindrical spines (opens in a new tab)

  19. Development of novel tapered pin fin geometries for additive manufacturing of compact heat exchangers

    Pin fin arrays are widely used to enhance forced convection heat transfer across various industries, finding application in turbine blade trailing edges, electronics cooling, and broadly for compact heat exchange. Fin shape greatly affects flow separation and turbulence generation, and optimizing …

    texas Repository record for Development of novel tapered pin fin geometries for additive manufacturing of compact heat exchangers (opens in a new tab)

  20. Numerical analysis of the performance of staggered pin-fin micro heat exchangers

    … drop characteristics of a staggered micro pin-fin heat exchanger were analyzed using a three dimensional finite element based numerical model. Simulations were conducted based on low Reynolds number, fully developed laminar airflow through an array of circular pin-fins. A range of results …

    nps Repository record for Numerical analysis of the performance of staggered pin-fin micro heat exchangers (opens in a new tab)

Page 1 of 4