Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 83 for “"Pin-on-Disk"”.

  1. DEVELOPMENT OF A PIN-ON-DISK TESTER FOR THE TRIBOLOGICAL STUDY OF MAGNETIC DISK MEDIA

    … can quickly and accurately determine the friction and wear characteristics of different disk media in contact with head materials under different sliding conditions. This thesis traces the development of the tester from its initial proof-of-concept stage to the final design. Also covered is the …

    nus Repository record for DEVELOPMENT OF A PIN-ON-DISK TESTER FOR THE TRIBOLOGICAL STUDY OF MAGNETIC DISK MEDIA (opens in a new tab) Download file for DEVELOPMENT OF A PIN-ON-DISK TESTER FOR THE TRIBOLOGICAL STUDY OF MAGNETIC DISK MEDIA (opens in a new tab)

  2. Ceramic lubrication: vapor phase tribopolymerization and a new high speed, high load pin-on-disk machine

    An experimental study of ceramic lubrication through the concept of tribopolymerization from the vapor phase is presented. Four vinyl monomer additives were studied, i.e., vinyl acetate, diallyl phthalate, lauryl methacrylate, and vinyl octadecyl ether. The liquid additives were heated, vaporized, …

    vt Repository record for Ceramic lubrication: vapor phase tribopolymerization and a new high speed, high load pin-on-disk machine (opens in a new tab)

  3. Experimental investigation of tribological characteristics of water-lubricated bearings materials on a pin-on-disk test rig.

    Friction is the most fundamental phenomenon accompanying the sliding motion of solid bodies. Friction, vibration, and wear under conditions of contaminated water lubrication are extremely important in many engineering applications such as water-lubricated bearings, water pumps, and braking systems. …

    adelaide Repository record for Experimental investigation of tribological characteristics of water-lubricated bearings materials on a pin-on-disk test rig. (opens in a new tab)

  4. Microstructure-property relationships in Cr(C)N coatings

    In this study, the effect of carbon on microstructure, mechanical properties, tribological properties and the deformation and fracture behavior in CrN and CrCN coatings with various graphite target currents in the deposition process were investigated. The elemental composition of Cr(C)N was …

    unsw Repository record for Microstructure-property relationships in Cr(C)N coatings (opens in a new tab)

  5. Produção de filmes DLC via deposição por plasma com cilindros catódicos

    This study involves the deposition of diamond-like carbon (DLC) thin films on AISI 4340 steel by thermochemical treatment, using the plasma deposition technique with cathodic cylinders (CCyPD) in a plasma reactor. This technique involves using a support cage for the compacted powder cylinders, …

    brazil-ufrn Repository record for Produção de filmes DLC via deposição por plasma com cilindros catódicos (opens in a new tab)

  6. An investigation of friction and wear mechanisms in selected thermoplastics

    These studies developed from Scanning Electron Microscope (SEM) observations of abrasive wear of a polymer disk sliding against metal asperity models. The investigator was unable to observe actual particle formation but did identify elastic and plastic deformation of the polymer, and a debris …

    vt Repository record for An investigation of friction and wear mechanisms in selected thermoplastics (opens in a new tab)

  7. Crosslinking methods for enhanced tribological properties of ultra-high-molecular-weight polyethylene for total joint arthroplasty

    <p>One of the primary life-limiting factors for modern total joint arthroplasty components is ultrahigh-molecular-weight polyethylene (UHMWPE) wear-debris-induced periprosthetic osteolysis, which leads to aseptic implant loosening and, ultimately, the need for revision surgery. Therefore, …

    ut-knoxville Repository record for Crosslinking methods for enhanced tribological properties of ultra-high-molecular-weight polyethylene for total joint arthroplasty (opens in a new tab)

  8. Obtenção do carbeto de alta entropia (TiVTaNbW)C via moagem de alta energia

    … molds and dies, cutting tools, and radiation-resistant shields. Various carbide compositions are produced using different processing methods. This study aims to obtain equimolar High-Entropy Carbide (HEC), (TiVTaNbW)C, by High-Energy Ball Milling (HEBM), using metallic precursor powders. …

    brazil-ufrn Repository record for Obtenção do carbeto de alta entropia (TiVTaNbW)C via moagem de alta energia (opens in a new tab)

  9. Computational wear simulations in total knee replacements with consideration for energy dissipation and colloid-mediated boundary lubrication

    The cost and time efficiency of computational wear simulations may enable the optimization of total knee replacements for the reduction of polyethylene wear, thereby potentially improving the long term success of total knee replacements. However, previously existing computational wear models have …

    manitoba Repository record for Computational wear simulations in total knee replacements with consideration for energy dissipation and colloid-mediated boundary lubrication (opens in a new tab)

  10. Vlastnosti slitin s vysokou entropií legovaných kvazikrystaly

    … °C, podrobeny analýze pomocí skenovacího elektronového mikroskopu a rentgenové difrakci a testovány na odolnost proti opotřebení metodou pin-on-disk. Bylo zjištěno, že s rostoucím obsahem kvazikrystalických částic v materiálu dochází ke zvyšování otěruvzdornosti.

    brno-tech Repository record for Vlastnosti slitin s vysokou entropií legovaných kvazikrystaly (opens in a new tab)

  11. Opotřebení tvrdých povlaků

    … zkušebního vzorku na tribometru metodou "Pin on disk". Množství a charakter opotřebení je vyhodnocen pomocí profilometru.

    brno-tech Repository record for Opotřebení tvrdých povlaků (opens in a new tab)

  12. A New Approach in Tribological Characterization of High Performance Materials

    This research conducts tribological investigation in three areas. The first area of research is to obtain basic understanding of tribological properties of high performance Inconel alloys. Pin-on-disk testing was conducted through a range of applied normal loads and sliding velocities in an …

    tamu Repository record for A New Approach in Tribological Characterization of High Performance Materials (opens in a new tab)

  13. Study of the Tribological Behaviours of Metal Disks and Gears Fabricated Using Conventional and Additive Manufacturing Technology

    Laser powder bed fusion (LPBF) is a commonly used additive manufacturing (AM) method due to its high precision and flexibility in producing complex components. While 316L stainless steel (SS) is widely used in LPBF, research on its tribological behaviour in real-world applications remains limited. …

    unsw Repository record for Study of the Tribological Behaviours of Metal Disks and Gears Fabricated Using Conventional and Additive Manufacturing Technology (opens in a new tab)

  14. Characterization of Boron Nitride Thin Films on Silicon (100) Wafer.

    Cubic boron nitride (cBN) thin films offer attractive mechanical and electrical properties. The synthesis of cBN films have been deposited using both physical and chemical vapor deposition methods, which generate internal residual, stresses that result in delamination of the film from substrates. …

    unt Repository record for Characterization of Boron Nitride Thin Films on Silicon (100) Wafer. (opens in a new tab)

  15. SCRATCH DAMAGE EVOLUTION ON METALS IN TOTAL JOINT REPLACEMENTS

    … of total joint replacement (TJR) is to replace nonfunctioning joint components and relieve pain, improve quality of life, and to improve joint function. Although TJR is a successful procedure, more than 54,000 knee revisions occur each year due to factors, such as wear, loosening, infection, …

    clemson Repository record for SCRATCH DAMAGE EVOLUTION ON METALS IN TOTAL JOINT REPLACEMENTS (opens in a new tab)

  16. A prediction of polymer wear using polymer mechanical properties and surface characterization parameters

    Polymers were slid on rough hard steel surfaces with normal loads which caused full penetration (real and apparent areas equal) and partial penetration (real less than apparent area). Wear data for polyvinylchloride (PVC) and polychlorotrifluoroethylene (PCTFE) was obtained on a pin-on-disk machine …

    vt Repository record for A prediction of polymer wear using polymer mechanical properties and surface characterization parameters (opens in a new tab)

  17. Tribo-corrosion maps for steels, titanium and titanium carbide materials

    In this project, research work was carried out on the tribo-corrosion behaviour of titanium carbide composite coatings produced by Tungsten Inert Gas (TIG) welding torch melting process on steel and titanium substrates. The integrity of TiC composite coatings were checked and analysed on the …

    strathclyde Repository record for Tribo-corrosion maps for steels, titanium and titanium carbide materials (opens in a new tab)

  18. Exploring Convergence of Snake Skin-Inspired Texture Designs and Additive Manufacturing for Mechanical Traction

    This research focuses on the understanding, development, and additive manufacture of a 3D printed snake skin-inspired texture pattern. The design functionalities of snake skin were determined through the study of the snake species Python Regius otherwise known as the ball python. Each scale of a …

    arkansas Repository record for Exploring Convergence of Snake Skin-Inspired Texture Designs and Additive Manufacturing for Mechanical Traction (opens in a new tab)

  19. An experimental investigation of wear behavior of ultra-high molecular weight polyethylene under sliding motion

    … project investigates the effect of sliding motion on the materials that are used as bearing surfaces of human total-joint replacement prostheses. The tests are performed with a specially designed equipment based on pin-on-disk machine. The testing machine is designed and constructed to reproduce …

    njit Repository record for An experimental investigation of wear behavior of ultra-high molecular weight polyethylene under sliding motion (opens in a new tab)

Page 1 of 5