Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"Pipe Bends"”.

  1. The erosion of pipe bends in pneumatic conveying systems

    … involved in the erosive wear process in 90 pipe bends, by a stream of pneumatically conveyed suspensions of solid particles. From appropriate analysis of the test data, a basis of correlation in terms of the respective parameters has been established, from which the like­lihood of erosion …

    greenwich Download PDF for The erosion of pipe bends in pneumatic conveying systems (opens in a new tab)

  2. Study of wear in pipe bends produced by slurries, A

    Includes bibliographical references (page 75).

    colo-mines Repository record for Study of wear in pipe bends produced by slurries, A (opens in a new tab)

  3. The influence of end constraints on pipe bends : a study of smooth pipe bends with flange and tangent pipe end constraints under in-plane bending

    The importance of smooth pipe bends in design of piping systems is well established. Recent publications have been increasingly concerned with the effect of end constraints on the behaviour of smooth bends but there have been relatively few attempts at a solution to the problem. The divergence …

    strathclyde Repository record for The influence of end constraints on pipe bends : a study of smooth pipe bends with flange and tangent pipe end constraints under in-plane bending (opens in a new tab)

  4. Mathematical and computational modelling for the design of pipe bends and compliant systems

    … when modelling the flow of a fluid through a pipe bend or deflector nozzle. These numerical processes include a new form of numerical integration and a finite element formulation which, it is suggested, could readily be extended to handle further realistic problems based on the pseudo three …

    london-metro Download PDF for Mathematical and computational modelling for the design of pipe bends and compliant systems (opens in a new tab)

  5. Some Phenomenon Regarding the Resistance of Steam Flow in Different Kinds of Pipe Bends

    … the resistance to steam flow in different pipe bends. Four kinds of bends are used in this experiment: the 90° standard elbow, the long radius bend, tube turns, and the corrugated type of bend. In this thesis the author relies altogether on experimental data taken direct from the …

    ut-knoxville Repository record for Some Phenomenon Regarding the Resistance of Steam Flow in Different Kinds of Pipe Bends (opens in a new tab)

  6. A study on pipe bends : an analysis of the smooth pipe bend with flanged end constraints under out-of-plane bending and the development of experimental techniques in the creep of pipe bends

    … design of piping systems the importance of the pipe bend is well established. Recent publications have been increasingly concerned with the effect of end constraints on the behaviour of smooth pipe bends. This has been aimed almost exclusively at in-plane bending, there being no serious attempts …

    strathclyde Repository record for A study on pipe bends : an analysis of the smooth pipe bend with flanged end constraints under out-of-plane bending and the development of experimental techniques in the creep of pipe bends (opens in a new tab)

  7. The effect of ovality on the membrane stress in a 2" thick walled 90 deg steam pipe bend

    Pipe bends are an integral part of any pipe work system. Pipe bends are often seen as the weak point in a pipe work system due to the additional stresses that are imposed on a bend during operation as well as the defects that develop in a bend during manufacturing. Ovality is one such defect and …

    nwu-za Repository record for The effect of ovality on the membrane stress in a 2" thick walled 90 deg steam pipe bend (opens in a new tab)

  8. Stresses in pipe ells under internal pressure

    … investigating stresses in five samples of steel pipe bends -which were furnished the United States Naval Postgraduate School, Monterey, California, as a result of an offer by Dr. John E, Brock, Research Director, Midwest Piping and Supply Company, St, Louis, Missouri, through Professor Robert E, …

    nps Repository record for Stresses in pipe ells under internal pressure (opens in a new tab)

  9. Validated Numerical Simulations Investigating the Effects of Cross-sectional Asymmetry on Fluid Flow and Heat Transfer

    … experimental data in asymmetric flow around pipe bends are presented near the beginning of this work. Thereafter, the results of numerical investigation into three situations have been presented. The first involves analyzing fluid flow in a piezometer ring, a device widely used to measure …

    umn Repository record for Validated Numerical Simulations Investigating the Effects of Cross-sectional Asymmetry on Fluid Flow and Heat Transfer (opens in a new tab)

  10. Investigation of Swirl Flows Applied to the Oil and Gas Industry

    … liquid loading in gas wells and erosion at pipe bends due to sand transport. For all three areas, Computational Fluid Dynamics (CFD) simulations were performed. Where available, experimental data were used to validate the CFD results. As a part of this project, a new test loop was conceived …

    tamu Repository record for Investigation of Swirl Flows Applied to the Oil and Gas Industry (opens in a new tab)

  11. Experimental and Theoretical Analyses of Adiabatic Two-phase Flows in Horizontal Feed Pipes

    … Currently, the two-phase flow behavior in feed pipes is hardly predicable and mostly based on empirical or heuristic methods, which do not properly account for a broad range of possible fluid properties and plant dimensions. As a consequence, costly safety margins are applied. Feed pipes to …

    qucosa-diss

  12. Sand erosion in dilute and dense mixtures. An Eulerian and Lagrangian CFD-study of wear correlations.

    … of widespread structural damage in offshore pipe systems and it is often associated with large costs. Correlative and empirical methods are often used to predict erosion rates. Such procedures, however, tend to yield overly conservative estimates. In this thesis, a Lagrangian CFD model has …

    chalmers Repository record for Sand erosion in dilute and dense mixtures. An Eulerian and Lagrangian CFD-study of wear correlations. (opens in a new tab)

  13. Using Experiments, 3D Scanning, and Computational Fluid Dynamics to Analyze Variance in Minor Loss Coefficients

    As water moves through pipes, it loses energy. The energy losses are due to friction and the minor losses associated with various pipe fittings, which change the direction of flow. Pipe bends, or elbows, are a common pipe fitting and a significant source of energy loss in piping systems. This …

    utahstate Repository record for Using Experiments, 3D Scanning, and Computational Fluid Dynamics to Analyze Variance in Minor Loss Coefficients (opens in a new tab)

  14. Structural integrity assessment of engineering components under cyclic loading at high temperature

    … cyclic plasticity behaviours of 90° back-to-back pipe bends under cyclic thermo-mechanical load and constant pressure. Another numerical study investigates creep-cyclic plasticity behaviours of Particle Reinforced Titanium Matrix Composites (PRTMCs), which is a futuristic engineering material, …

    strathclyde Repository record for Structural integrity assessment of engineering components under cyclic loading at high temperature (opens in a new tab)

  15. Interplay of Water Chemistry and Entrained Particulates in Erosion Corrosion of Copper and Nonleaded Alloys in Potable Water Systems

    … evidence. Large-scale recirculating hot water pipe-loop experiments demonstrated that an aggressive hard water with entrained aragonite (CaCO3) particles could cause fully penetrative failures (i.e., leaks) in brand new copper pipe and nonleaded brass fittings in just 3-49 days. This represents …

    vt Repository record for Interplay of Water Chemistry and Entrained Particulates in Erosion Corrosion of Copper and Nonleaded Alloys in Potable Water Systems (opens in a new tab)

  16. Structural behavior of steel components under strong cyclic loading

    … present study, the mechanical behavior of steel pipe bends (elbows), subjected to strong cyclic loading conditions, is presented. The elbows are modeled with finite elements, which account for the measured elbow geometry and for the actual properties of steel elbow material. To simulate material …

    greece Repository record for Structural behavior of steel components under strong cyclic loading (opens in a new tab)

Page 1 of 2