Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Pipe joints."”.
-
Simplified Design Equations and Laboratory Tests for Pipe Joints
… joint may be considered a weak point along the pipe and can have a major impact on pipe performance. However, little research has been conducted in regard to joint design. To improve current structural design criteria, this thesis presents the findings and conclusions of experimental and …
-
Development and Influence of Erosion Voids at Rigid Pipe Joints
… voids forming at leaky reinforced concrete pipe joints have on the pipe response to surface loading. The experiment consisted of a jointed system of two 825 mm inner diameter reinforced concrete pipes, buried in a uniform sand. A section of the pipe joint was left unsealed to allow …
-
The Performance of Reinforced Concrete Pipe Joints under Differential Ground Settlement
Leakage from reinforced concrete pipe joints has negative environmental impacts and can compromise the sewer or culvert’s service life. Pipes can fracture, corrode, rotate, experience joint pullout, and potentially undergo damage during their installation – leading to leakage into or out from the …
-
CHARACTERIZING AND TESTING OF MODIFIED OIL WELL CEMENTS, PIPE JOINTS AND MANHOLE COATING
… used in construction and the performance of joints in the storm water pipelines and coating on manholes. In order to monitor the setting time of oil well cement used in cementing oil wells and Portland cement used in many other construction were modified with additives to make the material …
-
Development of Seismic Testing and Design Prediction Techniques for Buried Pipe Joints and Building Envelopes
… to non-structural components, such as buried pipelines and building envelope systems. The cost of broken buried infrastructure, such as pipeline systems, to the Christchurch Council was excessive, as was the cost of repairing building envelopes to building owners in both Christchurch and …
-
A Fiber-Reinforced Plastic Joint for Filament-Wound Pipes: Analysis and Design
Pipe joints are susceptible to two failure mechanisms, failure from the standpoint of strength and leakage. The strength design procedure is derived from first principles taking into account the orthotropy of the fiber reinforced plastic material. The leakage analysis follows the guidelines of the …
-
High-Cycle Constant Amplitude Fatigue Life Variability of Welded Round HSS Y-Joints
… variability in fatigue life estimates for welded pipe joints commonly found in overhead transportation sign support structures has not been characterized to the level necessary for generating accurate fatigue life predictions for these structures. Cracking found in existing sign support structures …
-
Impact of Sewershed Characteristics on Rainfall Derived Inflow and Infiltration
… downspout connections, foundation drains, pipe joints, and broken pipes. Identifying these sources individually can be time intensive and expensive if entire service areas need to be addressed. High level screening tools are therefore needed that can apply readily available data to identify …
-
Detection and Localization of Root Damages in Underground Sewer Systems using Deep Neural Networks and Computer Vision Techniques
… damages from nearby plants that grow through pipe cracks or loose joints, which may lead to serious pipe blockages and collapse. Traditional inspections based on video surveillance to identify and localize root damages within such complex sewer networks are inefficient, laborious, and …
-
Experimental Seismic Evaluation of Ceiling-Piping-Partition Nonstructural Systems
… of failure compared to seismic clips, 2) pipe joints with 2.0 in. (50.8 mm) diameter pipes have the greatest probability of rotation failure compared to other diameter pipes, and 3) acceleration amplification factors for out-of-plane partition walls are comparable with the recommended …
-
The performance of jacked pipes
Pipejacking is a tunnel construction technique which is increasing in popularity, but fundamental research is necessary to fully understand the extent of its possible uses and limitations. This dissertation reports on laboratory research into the performance of reinforced concrete pipes, assessment …
-
Thermal rheological analysis of cure process of epoxy prepreg
… cure process of epoxy prepreg used as composite pipe joints was studied by means of differential scanning calorimetry (DSC), Bohlin Rheometer and other techniques. Isothermal DSC measurements were conducted between 110 and 220 oC, at 10 oC intervals. The results show that the complete cure …
-
Vitrified Clay Pipe Joint Behaviour Under Differential Ground Movement
… were used to investigate the behaviour of pipe joints connecting four segments of vitrified clay pipe subjected to differential ground movement. Firstly, linear potentiometers, inclinometers and strain gauges were installed to monitor joint rotations, joint axial compression or extension, …
-
The behaviour of jacked concrete pipes during site installation
… has been spent by manufacturers and users of pipe jacking equipment to develop suitable techniques, this work appears to be the first to study the method at full scale, in a scientific research programme. It has involved monitoring a series of five pipe jacks during construction. In each case …
-
Galvanic Lead Corrosion in Potable Water: Mechanisms, Water Quality Impacts, and Practical Implications
As stagnant water contacts copper pipe and lead solder (simulated soldered joints), a corrosion cell is formed between the metals in solder (Pb, Sn) and copper. If the resulting galvanic current exceeds about 2 µA/cm², a highly corrosive microenvironment can form at the solder surface, with pH <2.5 …
-
Development and Characterization of Grouts for Sealing and Sensing Applications
… to evaluate the sealing of leaking waste water pipe joints and decommissioning oil pipelines. The addition of surfactants had a significant effect on the polymeric grouts (maximum increase up to 4 hrs with the addition of Cationic surfactant). The bleed in the cement grout was reduced to zero …
-
The structural interaction of pipe couplings used for trenchless construction.
… construction of underground services by the pipe jacking method has radically increased over the past thirty years, particularly in sensitive urban areas. Spoil is removed at the cutting face and the entire pipeline is pushed through an oversized tunnel bore by large hydraulic jacks. The …
-
Chloride Sulfate Mass Ratio (CSMR) and Nitrate Acceleration of Galvanic Lead- Bearing Solder Corrosion
… plumbing systems from materials, such as lead pipes, soldered joints, and brass, can cause elevated lead in drinking water. This work examined mechanisms by which galvanic corrosion of lead solder:copper joints is accelerated by high chloride, low sulfate, and high nitrate in the water. …
-
Numerical analysis and laboratory test of concrete jacking pipes
Pipe jacking is a trenchless construction technique for the installation of underground pipelines. Although pipe jacking is widely used, fundamental research is still needed to understand fully the factors affecting the process and to prevent unexpected failure. With the time and financial …
-
Local thermal stress factor of pipe-nozzle
… of local thermal stresses at the juncture of pipe-nozzle is presented in this thesis. The thermal loading is assumed to be a linear thermal gradient across the thickness of the pipe and nozzle. Currently, there exists neither experimental nor analytical data that is sufficient for pressure …
Page 1 of 2