Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Pit depth"”.
-
Quantifying the effect of in-situ stresses and pit depth on slope stability by incorporating brittle fracturing in numerical model analyses
… main challenges in a mining operation. As open pits get increasingly deeper, the need to better understand the behavior of high rock slopes has become more critical. Currently, it is not clear how mining at increased depths may impact slope behavior. Similarly, the impact of in-situ stress …
-
Bayesian Modeling of Pitting Corrosion in Steam Generators
… experienced varying degrees of under-deposit pitting corrosion. A probabilistic model to accurately predict pitting corrosion is necessary for effective life-cycle management of steam generators. This thesis presents an advanced probabilistic model of pitting corrosion characterizing the …
-
The metal-catalyzed etching and growth of diamond
… or less. In a series of fourteen reactions the pit depth and volume of six etch pits were monitored using the AFM. A gas mixture of CO/CO2 was used and its carbon potential varied. We were able to document growth and etching by measuring the change in pit depth and pit volume. Under growth …
-
Microbiologically induced corrosion of AISI 304 stainless steel by Desulfovibrio desulfuricans in artificial seawater
… XPS. After 14 days of immersion, the SRB induced pits and cracks on the SS surface (AFM analysis); decreased the polarization resistance (Rp) in comparison to control samples (EIS analysis); modified the near surface environment of the SS and caused the dissolution of the oxide layer on the SS …
-
Paviršinių difrakcinių elementų optimizavimas ir formavimas femtosekundiniais UV lazerio impulsais /
… order. These results were obtained with a pit depth of 800–850 nm and a 17% pit overlap. These crater parameters can be realized using UV femtosecond laser ablation. Additionally, the theoretical modelling results show that to maintain the desired diffraction grating efficiency, it is …
-
Impedance-Based Structural Health Monitoring to Detect Corrosion
… process which over time leads to surface pitting. The combined action of mechanical stresses and corrosion induced pitting reduces structural integrity as the pits enlarge to form nucleation sites for surface cracks, which propagate into through-thickness cracks. In most cases, the total …
-
Corrosion Evaluation of Chromized Steel Utilized in Automotive Exhaust Applications
… testing (internal), measuring the mass loss, pitting density, maximum pit depth and corrosion rate. Although Type 409 and Type 439 exhibited evidence of sensitization in the mill annealed condition, all materials exhibited a resistance to further sensitization during heat treatment, indicating …
-
Microbiological and chemical aspects of corrosion of sheet steel in the Duluth-Superior Harbor
… raised blister-like nodules called tubercles and pitted steel. This corrosion phenomenon could possibly decrease the integrity and the lifespan of the structures. Microbiological and chemical factors that may be influencing corrosion processes were examined in this study from 2007-2009. A …
-
In situ synchrotron x-ray characterisation and modelling of pitting corrosion of stainless steel
Pit propagation in stainless steels under electrochemical control was investigated using in situ synchrotron X-ray microtomography, which was used to confirm that the lacy covers commonly found for pits in stainless steels grow through perforation of the metal surface by upward growth of rapidly …
-
Experimental Characterization and Computer Vision-Assisted Detection of Pitting Corrosion on Stainless Steel Structural Members
Pitting corrosion is a prevalent form of corrosive damage that can weaken, damage, and initiate failure in corrosion-resistant metallic materials. For instance, 304 stainless steel is commonly utilized in various structures (e.g., miter gates, heat exchangers, and storage tanks), but is prone to …
-
3D Scanning of naturally corroded steel bars. An assessment of corrosion behaviour and correlations to critical cross-sections
… convey a non-uniform distribution of pits along the bar length. For a specific length, it is possible to identify a critical cross-section (CCS), which attains the highest loss of area. This thesis defines CCS and illustrates how the different characterizing parameters of the same can …
-
Localized Corrosion of Stainless Steels in High Temperature Potash Brine
… initiation of localized corrosion. The average pit depth and the five deepest pits have been measured and compared to LCRI for the tested alloys. The deepest pits (the cause of metal failure) found in the exposure tests show that the LCRI cannot predict the propagation of the pits. Austenitic …
-
Corrosion fatigue initiation in stainless steels : The scanning reference electrode technique.
… was made on the role played by corrosion pits, which can act as stress concentrators and promote fatigue crack nucleation. SRET measurements conducted during the potentiostatic generation of pits on the austenitic stainless steels in artificial seawater showed that the pit current density …
-
Prediction of water distribution system pipes and isolation valves failure using Bayesian models with the consideration of soil corrosion and climate change
… Service Life (RSL) model which predicts pit depth and quanti es the probability and time to failure for cast iron pipes. The next part of this research evaluates the failure of valves using BBN-based failure mode and effect analysis. The DBN model considers static, operational and …
-
Salt film development during pitting of nickel
<p>Pitting corrosion is one of the major causes of industrial failure of metallic parts. Unfortunately, such attack cannot always be detected before perforation occurs. Understanding the mechanism of pit development will provide us with a clue of how to prevent pitting corrosion in advance. From an …
-
Micro-mechanisms of fatigue and corrosion in a laser shock peened aerospace aluminium alloy.
… fatigue, corrosion and fatigue of pre-corroded pits. Surface and microstructural characterisation techniques (micro-hardness, SEM-EBSD, contactprofilometry, incremental hole drilling, X-ray diffraction) showed the laser shock peening treatments generated high residual stress fields of up to –400 …
-
Electrochemical study of bismuth chalcogenides
… clear surface dissolution accompanied by pit formation was observed. With increasing oxidation time, these pits only expanded in the lateral direction, keeping a pit depth of about 1 nm. Three probable dissolution modes were discussed to explain the positive correlation between the pit …
-
Structural Integrity of Eyes Diagnosed with Amblyopia. The measurement of retinal structure in amblyopia using Optical Coherence Tomography.
… of the fovea and reduction of the foveal pit depth. The structural changes were found to be both bilateral and symmetrical with the fellow eye also affected. In the longitudinal phase of the study these changes were demonstrated to a greater extent in children who ¿failed¿ to respond to …
-
The effects of individual and combinations of airborne pollutants on feed intake, immune function and physiology of the pig.
… floors to dry before restocking pens, increasing pit depth to ≥400 mm, and flushing pits with fresh water all have a positive effect on air quality and growth rate. It is clear that facilities need to be managed as an all-in/all-out (AIAO) system as this enables farmers to maximise hygiene by …
-
In vitro osteoclast resorption of calcium phosphate bone substitutes
… using an OC resorption assay where resorption pits formed on the CaP surface are analysed by microscopy techniques and quantified on the basis of pit number, pit area or pit volume. Apart from the time consuming nature of the analysis techniques, there are many limitations associated with the …
Page 1 of 2