Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"Pitot Probe"”.
-
Experimental investigation on the icing physics and anti-/de-Icing technology of an aircraft pitot probe
<p>Pitot probes are one of the most important components of an airplane, directly responsible for the flight safety and secure decisions of pilots by providing crucial airspeed and altitude data. They are constantly at risk of performance deterioration due to ice accretion that can block the …
-
Boundary Layer Characteristics on a Tiltrotor Blade Model
… blade model were measured using a flattened pitot probe and a single hot wire. The blade was mounted in Virginia Tech Stability Wind tunnel stationary on a turntable on the wind tunnel's upper wall with the tip pointing down. The measurement point was located at 1 mm behind the trailing edge …
-
Wake Survey Techniques for Objects With Highly Turbulent Wakes
… Jones' equation with measurements using a Pitot probe, and found that this method includes a portion of the turbulence effect into account implicitly, depending on the nose shape of the probe. A method for estimating this implicit correction was developed. Finally, wake survey techniques …
-
Boundary layer measurements in high subsonic flow using holographic interferometry
… and compared with those resulting from the pitot probe, split-film, and cross-wire. Data reduction, equipment used, and problems encountered are outlined in this work. The computer program is included in Appendix B.</p>
-
Determination of the velocity, density, mass flux and enthalpy profiles for very high temperature arc jet nozzle flow
… conical nozzle directly from calorimetry and pitot probe surveys.
-
Effect of inlet configurations on the aerodynamics of swirl combustors
… measurements were made using a five hole Pitot probe and turbulence measurements were obtained from a hot wire anemometer. All the flow visualization tests were made with Reynold's number between 10,000 and 47,500, and quantitative measurements in the cold air flow were made at a Reynold's …
-
Effects of Mach Number and Flow Incidence on Aerodynamic Losses of Steam Turbine Blades
… -34o to 35o. Measurements included downstream Pitot probe traverses, upstream total pressure, and endwall static pressures. Flow visualization techniques such as shadowgraph photography and color oil flow visualization were performed to complement the measured data. When the exit Mach number …
-
Supersonic wind-tunnel : nozzle design and control system analysis
… vertical tunnel side walls parallel. The five pitot probe calibration results, taken through the central vertical plane in the tunnel test-section, showed Mach number standard deviations about the mean of 0,638% and 1,004% for the analytical and semi-graphical design respectively. These results …
-
Total velocity vector measurements in an axial-flow compressor using a 3-component Laser Doppler Anemometer
… The LOA measurements are shown to agree with pitot probe measurements in the stationary frame and basic secondary flow theory. A detailed error analysis is presented, taking into account both measurement uncertainties and statistical biasing. An analysis is also made of particle lag in the …
-
Development and accuracy determination of a two-component Doppler Global Velocimeter (DGV)
… flow profiles agreed very well with the shape of pitot probe measurements. RMS errors were on the order of 5--10%, but velocity offset error was as much as 10--15% of the 42 m/s velocity range. DGV measured turbulence intensities at the center of the pipe, 4 diameters downstream agreed with hot …
-
An experimental investigation of the forebody of a hypersonic inlet model and a comparison with theory
… was obtained from surface static pressure taps, pitot probe surveys, oil-streak tests, and schlieren photographs. The results of the investigation indicate that the leading-edge shock waves join in a manner producing a region of three-dimensional, conical-like flow near the model's plane of …
-
Effects of surface roughness on the flow characteristics in a turbulent boundary layer
… and fully rough flow regimes. Three different probes, namely, Pitot probe, single hot-wire, and cross hot-film, were used to measure the velocity fields in the turbulent boundary layer. A Pitot probe was used to measure the streamwise mean velocity, while the single hot-wire and cross hot-film …
-
The effects of turbulence length scale on heat transfer
… exit pressure. A transient technique in which a pitot probe was only briefly exposed to the flow allowed uncooled, flush mounted, sub-miniature pressure transducers to be used to measure the turbulence spectra of combustor exhaust gases at temperatures up to 1500 K. It was found that the …
-
Active Flow Control For Reduction of Unsteady Stator-Rotor Interaction In a Turbofan Simulator
… The first flow control system utilizes Pitot probes as flow sensors. Use of Pitot probes as sensors is appropriate as a first step toward a more in depth investigation of active trailing edge blowing control. An upper performance limit in terms of wake-filling can be obtained and serves …
-
Performance Characteristics of Fluidic-Based Thrust Augmentation Using a Slot Jet for Unmanned Aerial Vehicle Propulsion
… envelope was created and tested with a Pitot probe experiment. The velocity profiles were recorded and thrust values were calculated. The experimental envelope was narrowed for the most prominent configurations and Particle Image Velocimetry (PIV) with a high speed laser camera setup was …
-
Influence of Environmental Disturbances on Hypersonic Crossflow Instability on the HIFiRE-5 Elliptic Cone
… using a Kulite pressure transducer mounted in a pitot probe configuration and a hot-wire anemometer, indicated that fluctuation levels at the upstream model station were half those at the downstream stations. Fast-response PCB and Kulite surface mounted pressure transducers allowed examination of …
-
A study of moderately underexpanded single and twinjet rocket exhaust plumes in quiescent and in a mach 7 hypersonic freestream
… are made at downstream locations and similar Pitot pressure profiles were observed for nitrogen injection in a nitrogen freestream after approximately 3 nozzle diameters downstream. Shear layers were studied and fluctuations in this region were measured by fast-response Pitot pressure and heat …
-
Supersonic turbulent boundary layers with periodic mechanical non-equilibrium
… profiles were acquired with a traversing Pitot probe. Surface pressure distributions were characterized using pressure sensitive paint. Finally flow visualization was accomplished using schlieren photographs. Roughness topology had a significant effect on the boundary layer mean and …
-
An Invariant Extended Kalman Filter for Indirect Wind Estimation Using a Small, Fixed-Wing Uncrewed Aerial Vehicle
… directly, using, for example, a five-hole Pitot probe or a sonic anemometer mounted on an aircraft, or indirectly. Indirect measurement methods consider the dynamics of the aircraft and use measurements from its operational sensor suite to infer wind velocity. This work is concerned with …
-
Fluid Flow Characteristics of a Co-Flow Fluidic Slot Jet Thrust Augmentation Propulsion System
… variable's effects on these quantities. Pitot probe testing extracted one dimensional fluid information and PIV analysis is used to characterize the two-dimensional flow aspects. High slot jet velocities are seen to develop flows dominated by convection pushing momentum mixing downstream …
Page 1 of 2