Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 229 for “"Pitting corrosion"”.
-
Computational Model of Pitting Corrosion
Pitting corrosion is a form of highly localized corrosion that can lead to crack and failure of a structure. Study on pitting corrosion is necessary in order to predict and prevent the risk of failure of structure susceptible to corrosion. In this thesis, a combination of Cellular Automata (CA) and …
-
Atmospheric pitting corrosion of stainless steel
Atmospheric pitting corrosion of austenitic stainless steels 304L and 316L under droplets of MgCl2 have been studied under conditions of relevance to long-term storage of nuclear waste containers using automated deposition of arrays of droplets. The effect of microstructure on the morphology of …
-
Pitting Corrosion in Copper Premise Plumbing
… and low cost. However, copper pipe is subject to corrosion despite being categorized as corrosion resistant. Pitting corrosion of copper pipe has occurred in several systems across the nation, and a body of research has occurred to identify the causes and remediation of pitting corrosion. This …
-
Local Environment in Pitting Corrosion of Aluminum
The pH and chloride microsensors were used to study propagation and repassivation of pits on pure aluminum in pH 11 NaCl solution. It was concluded that the pH inside a growing pit was around 2.7, and the chloride concentration was higher than the saturation concentration. After current to the pit …
-
Bayesian Modeling of Pitting Corrosion in Steam Generators
… experienced varying degrees of under-deposit pitting corrosion. A probabilistic model to accurately predict pitting corrosion is necessary for effective life-cycle management of steam generators. This thesis presents an advanced probabilistic model of pitting corrosion characterizing the …
-
Pitting corrosion initiation in AISI 316 austenitic stainless steel
The initiation of pitting corrosion on AISI 316 stainless steel has been examined from a phenomenological viewpoint with emphasis on the role of the metal in this complex, interaction. A modified potentiodynamic technique was used to prepare specimens corresponding with a series of different points …
-
Chloride Induced Pitting Corrosion-Fatigue in Reinforced Concrete Structures
… on the harshness of their service environment. CorrosionFatigue (CF) is a damage mechanism commonly found in many Reinforced Concrete (RC) structures (bridges, harbor structures, oil platforms, etc.) exposed to variable loading and a corrosive environment. CF is a synergetic phenomenon between …
-
Evaluation of Theories for the Initial Stages of Pitting Corrosion
… this hypothesis, five proposed theories for pitting corrosion are compared using data published in the literature. The processes assumed to occur during pit nucleation are simulated. The solution compositions and potentials from reported experimental determinations of pitting potentials are …
-
A Study on Pitting Corrosion of Stainless Steels in Halide Solutions
The role of Mo in the pitting behaviours of stainless steels in bromide solutions is a matter of current debate. While Mo has been widely acknowledged to increase the pitting resistance in chloride solutions, some authors have proposed that the beneficial effects of Mo are compromised in bromide …
-
Reaction-Transport Model of Pitting Corrosion Relevant to Nuclear Steam Generators
The pitting mechanism of nickel-based alloys relevant to the nuclear steam generator is complex and unpredictable, particularly without the aid of a pitting model. Thus, the present research focuses on developing a reaction-transport model to study the propagation stage of corrosion pits. A …
-
Synchrotron x-ray and electrochemical studies of pitting corrosion of iron
Pitting corrosion of iron has been studied via artificial pits. Solid corrosion products were observed within the pit, which was characterised as disordered-carbon and Fe\(_3\)C, acted as diffusion barriers for metal ions and slightly increased the solution resistance. Its formation depends upon …
-
Synchrotron x-ray studies of atmospheric pitting corrosion of stainless steel
Atmospheric pitting corrosion of stainless steel was studied to determine pit growth mechanisms and kinetics. Inkjet printing of chloride was used to investigate the growth of atmospheric corrosion pits. It has been shown that the pit size increases with increasing chloride deposition density, as …
-
Perchlorate reduction using electrochemically induced pitting corrosion of zero-valent titanium
… to chloride using electrochemically developed pitting corrosion on Ti(0). Perchlorate reduction was believed to be caused by an active reductant (dissolved Ti(II)) during the pitting corrosion of Ti(0). The rate of perchlorate reduction was independent on the imposed potential as long as the …
-
Initiation, Propagation, and Mitigation of Aluminum and Chlorine Induced Pitting Corrosion
… and 4) try to determine the scope of this pitting problem in other distribution systems and on a national level. The first set of experiments clearly defined the controversial trends from earlier work. At certain pH values, the presence of chlorine and aluminum solids does seem to initiate …
-
Stress Corrosion Cracking and Pitting Corrosion of Carbon Steel in Ethanolic Environments
… studies have recently claimed that the Stress Corrosion Cracking (SCC) of carbon steel in ethanolic environments occurs by an anodic dissolution mechanism, but the exact mechanism is not well understood. In this research project, potentiostatic slow strain rate testing was conducted on SCC test …
-
Experimental and Theoretical Investigation of Pitting Corrosion of Nickel in Chloride Solution
Pitting corrosion of nickel in 0.5M NaCl (pH 6.3) was investigated with use of single corrosion pits under both stagnant and flow conditions. The pit dissolution current was found to vary as a function of the applied potential. The pit surfaces were crystallographic, although the general shape of …
-
Soil and pitting corrosion of hot-dip galvanized steel : experimental and mathematical modeling
… towers are designed to last decades and the slow corrosion rate of the Zn coating plays an important role in assuring this service. However, under certain conditions, the corrosion rate of Zn coatings is considerable, and it may threaten the integrity of the galvanized steel structure, thus …
Page 1 of 12