Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"Plane source"”.

  1. Exploratory machine learning strategies for predicting thermal conductivity of materials from transient plane source measurement

    … of machine learning to the Hot Disk Transient Plane Source (TPS) method, aimed at enhancing the precision and efficiency of thermal conductivity prediction. Comprising two distinct parts, Part I, the research addresses the prediction of thermal conductivity in low-density/high-insulation …

    chalmers Repository record for Exploratory machine learning strategies for predicting thermal conductivity of materials from transient plane source measurement (opens in a new tab)

  2. Simulation of image formation in nuclear medicine imaging systems using Monte Carlo methods

    … (MTF), was initially assessed with a novel plane source consisting of a Thin Layer Chromatography (TLC) plate, simulated by a layer of Silica gel on Aluminium foil substrates immersed in Fluorodeoxyglucose (18F-FDG) bath solution (44.4MBq). MTF was assessed from the evaluated STIR digital …

    greece Repository record for Simulation of image formation in nuclear medicine imaging systems using Monte Carlo methods (opens in a new tab)

  3. Experimental Study of Proton Rate Density in a Spherical Inertial Electrostatic Confinement Fusion Device

    … derivatives--an SIEC wavelength tunable x-ray source (SIEC-TX) and an IEC linear neutron source device (C-device)--have been developed. The SIEC-TX generates x-rays by electron-electron interactions at relativistic velocity at the sphere center when the electrons are accelerated and focused by …

    uiuc Repository record for Experimental Study of Proton Rate Density in a Spherical Inertial Electrostatic Confinement Fusion Device (opens in a new tab)

  4. Comparison of analytical and numerical biodegradation models with application to aquifer remediation

    … analytical and numerical models. The horizontal plane source analytical code (HPS) was compared to the USGS solute transport numerical code (MOC) for different problem configurations. BIOPLUME II is a sophisticated numerical model which estimates aerobic biodegradation of benzene, toluene, and …

    rice Repository record for Comparison of analytical and numerical biodegradation models with application to aquifer remediation (opens in a new tab)

  5. A method for the accessment of the imaging properties of tomographic nuclear medicine systems (spect, pet) by using the line spread function (LSF)

    … the line spread function (LSF) method. A novel plane source was prepared using thin layer chromatography (TLC) of a fluorine-18-fluorodeoxyglucose (18F-FDG) solution. The source was placed within a phantom, and imaged using the whole body (WB) two dimensional (2D) and three dimensional (3D) …

    greece Repository record for A method for the accessment of the imaging properties of tomographic nuclear medicine systems (spect, pet) by using the line spread function (LSF) (opens in a new tab)

  6. Reliable Determination and Interpretation of Thermal Transport Properties in MgO-C Refractories

    … using laser flash analysis and the transient plane source method. The results show that the measured thermal diffusivity and thermal conductivity should be regarded as effective values rather than purely intrinsic material property. By distinguishing the effects of sample preparation, thermal …

    qucosa-diss

  7. Thermal conductivity measurements of polyamide powder

    … nanotubes were conducted based on transient plane source technology using a Hot Disk® TPS500 conductivity measurement device. Polyamide powder was packed to three different densities in nitrogen at room temperature. Thermal diffusivity and conductivity were measured from 40°C to 170°C for …

    texas Repository record for Thermal conductivity measurements of polyamide powder (opens in a new tab)

  8. Infiltration geschlossenporiger pulvermetallurgischer Aluminiumschäume mit Phase-Change-Material und Evaluierung des Potentials des Materialverbundes

    … Analyse, dem Druckversuch und dem „Transient-Plane-Source“-Verfahren charakterisiert. Dem schließt sich die Entwicklung von Infiltrationsmethoden zur Herstellung von Werkstoffverbunden aus den Einzelwerkstoffen an. Der Infiltrationsgrad wird als wesentlicher zugehöriger Berechnungs- und …

    qucosa-diss

  9. Evaluation of Different Additives in a Polyolefin System and Their Impact on the Polymer Properties

    … Thermal Analysis (DMTA), Tensile test, Transient Plane Source (TPS) were performed. The incorporation of additives in polymer samples did not exhibit a considerable influence on the thermal properties of blends; however it affected the mechanical properties. The presence of liquid additives in the …

    chalmers Repository record for Evaluation of Different Additives in a Polyolefin System and Their Impact on the Polymer Properties (opens in a new tab)

  10. DIW of Copper for Ag-Cu Infiltration to Improve Thermal Conductivity

    … conductivity was evaluated using transient plane source (TPS) testing. The sintered copper specimens achieved an average density of 6.63 g/cm3 , corresponding to approximately 74% of the theoretical density of copper. Following BAg-8 infiltration, the average density increased to 9.08 g/cm3 …

    ut-knoxville Repository record for DIW of Copper for Ag-Cu Infiltration to Improve Thermal Conductivity (opens in a new tab)

  11. Microstructure and thermal conductivity of 3D-printed carbon fiber reinforced polyetherimide

    … conductivity was measured using the Transient Plane Source (TPS) technique, and the microstructure was characterized to assess fiber length, orientation, volume fraction, and void morphology. The impact of these microstructural features on anisotropic thermal conductivity was then further …

    ubc Repository record for Microstructure and thermal conductivity of 3D-printed carbon fiber reinforced polyetherimide (opens in a new tab) Download PDF for Microstructure and thermal conductivity of 3D-printed carbon fiber reinforced polyetherimide (opens in a new tab)

  12. Ignition and Flame Spread in Wood-Based Composites

    … heat capacity, were analysed using Transient Plane Source (TPS) measurements. A new technique has been introduced for measuring thermal inertia as a surface property, enabling its determination through a single measurement. This method addresses the limitations of traditional approaches, which …

    lund Repository record for Ignition and Flame Spread in Wood-Based Composites (opens in a new tab) Download PDF for Ignition and Flame Spread in Wood-Based Composites (opens in a new tab)

  13. Measurement of the Frequency Response and Thermal Neutron Wave Dispersion Parameters in Water and Water-Void Assemblies

    … arrangement which designed to provide a plane source of thermal neutrons with minimum pulse broadening. The thermal neutron waves were propagated axially in a water assembly with and without voids. The time profile of the thermal neutron pulse was recorded with lithium glass scintillation …

    aston Repository record for Measurement of the Frequency Response and Thermal Neutron Wave Dispersion Parameters in Water and Water-Void Assemblies (opens in a new tab) Download PDF for Measurement of the Frequency Response and Thermal Neutron Wave Dispersion Parameters in Water and Water-Void Assemblies (opens in a new tab)

  14. Thermal Insulation based on Natural Fibers for Sustainable Buildings

    … was measured using the modified transient plane source (MTPS) technique. Overall, the insulation performance of the developed composites is comparable to commercial insulation, with k values ranging from 0.037 to 0.043 W/m-K. Future work must ensure that this insulation meets flammability …

    gatech Repository record for Thermal Insulation based on Natural Fibers for Sustainable Buildings (opens in a new tab)

  15. Material properties related to fire spalling of concrete

    … have been investigated using the Transient Plane Source (TPS) technique. Measurements of temperature in the cross-section of selfcompacting concrete with the addition of polypropylene fibres (PP-fibres) during fire exposure are presented. A verification calculation, based on the measured …

    lund Repository record for Material properties related to fire spalling of concrete (opens in a new tab) Download PDF for Material properties related to fire spalling of concrete (opens in a new tab)

  16. An analytical method to determine the amount of heat exchanged through thermally activated embedded retaining walls

    … geothermal energy is one of the most promising sources for producing clean energy that can be utilised for indoor heating and cooling systems. One of the methods to exploit this is through Energy Geostructures. These are the embedded portions of a structure that are thermally activated via heat …

    whiterose Download PDF for An analytical method to determine the amount of heat exchanged through thermally activated embedded retaining walls (opens in a new tab)

  17. Design, Analysis, Fabrication and Testing of Thermally Actuated Microvalves

    … and starting from ambient conditions. Transient Plane Source (TPS) technique was used to measure the thermo-physical properties of PDMS samples. The results show that thermal conductivity, specific heat capacity and thermal diffusivity of the PDMS samples are 0.173±0.002 [W/(m‧K)], 1326.4±25.2 …

    tamu Repository record for Design, Analysis, Fabrication and Testing of Thermally Actuated Microvalves (opens in a new tab)

  18. Multiphase unsaturated zone contaminant transport model for source term definition in ground water

    … water modeling to characterize the hydrocarbon source loading in terms of the release rate and intensity of the pollutant. The OILENS model (Charbeneau and Shultz, 1988) is selected and combined with the MUCT model to study the impact of a hydrocarbon release event on ground water quality. The …

    rice Repository record for Multiphase unsaturated zone contaminant transport model for source term definition in ground water (opens in a new tab)

  19. Electrical and Thermal Experimental Characterization and Modeling of Carbon Nanotube/Epoxy Composites

    … conductivity was determined by a transient plane source thermal analyzer. It was found that electrical conductivity increases by orders of magnitude for the pristine and oxidized XD CNT composites relative to the neat epoxy matrix, while fluorinated XD CNT composites remain electrically …

    tamu Repository record for Electrical and Thermal Experimental Characterization and Modeling of Carbon Nanotube/Epoxy Composites (opens in a new tab)

Page 1 of 2