Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 8 of 8 for “"Plasma Bonding"”.

  1. Design, Fabrication, and Characterization of an Electrostatically Actuated Microfluidic Valve

    … new processes in the clean room, including RIE Plasma bonding, PDMS sputtering techniques, and multilayer PDMS thin film fabrication. The PDMS sputtering technique in particular allows profilometry measurement of PDMS surfaces without risk of damaging the profilometer tip, a development that …

    calpoly Repository record for Design, Fabrication, and Characterization of an Electrostatically Actuated Microfluidic Valve (opens in a new tab)

  2. Tunable Elastomeric Nano-Channels from Guided Fracture for Biopolymer Super Resolution Imaging

    … cracks are sealed with a thin PDMS film by plasma bonding. This creates channels from the surface cracks, where the channel widths can be tuned via an automated stretcher that applies a uniaxial strain. This tunable device can be used to capture biopolymers such as DNA and chromatin. The …

    gatech Repository record for Tunable Elastomeric Nano-Channels from Guided Fracture for Biopolymer Super Resolution Imaging (opens in a new tab)

  3. A scalable microfluidic extraorporeal lung assist device for preterm neonates

    … increased risk of thromboembolic events, and plasma-protein leakage through membrane pores. Microelectromechanical systems (MEMS) is a new technology that can be used to fabricate channels that mimic lung vasculature. Studies have shown that ECMO made with MEMS technology can be designed to …

    bu Repository record for A scalable microfluidic extraorporeal lung assist device for preterm neonates (opens in a new tab)

  4. Hollow fiber based pre-concentration and a microfluidic filtration device for water samples

    … still further from ~ 5 ml to 5 μl was designed. Plasma bonding of ultrafiltration and microfiltration membranes using fluorine ions was investigated for fabrication of this device. The bonding of PDMS channels with polysulfone membranes via SF6 plasma was tested via tensile pull tests, burst …

    mcmaster Repository record for Hollow fiber based pre-concentration and a microfluidic filtration device for water samples (opens in a new tab)

  5. Making cartilage one drop at a time: harnessing droplet microfluidics for cartilage tissue engineering

    … designs incorporating silanisation and plasma bonding generated highly monodisperse droplet diameters that were promising for cell encapsulation. A functional stability assay demonstrated the higher effectiveness of the Bio-Rad QX200TM droplet generation oil commercial variation compared …

    soton Download PDF for Making cartilage one drop at a time: harnessing droplet microfluidics for cartilage tissue engineering (opens in a new tab)

  6. Sequentially Plasma Activated Bonding for Wafer Scale Nano-Integration

    <p>Sequentially plasma activated bonding (SPAB) of silicon wafers has been investigated to facilitate chemical free, room temperature and spontaneous bonding required for integration of nanostructure on the wafer scale. The SPAB consists of surface activation using reactive ion etching (RIE) plasma …

    mcmaster Repository record for Sequentially Plasma Activated Bonding for Wafer Scale Nano-Integration (opens in a new tab)

  7. Design and Fabrication of Micro-Channels and Numerical Analysis of Droplet Motion Near Microfluidic Return Bends

    Three-dimensional spheroid arrays represent in vivo activity better than conventional 2D cell culturing. A high-throughput microfluidic chip may be capable of depositing cells into spheroid arrays, but it is difficult to regulate the path of individual cells for deposition. Droplets that …

    ndsu Repository record for Design and Fabrication of Micro-Channels and Numerical Analysis of Droplet Motion Near Microfluidic Return Bends (opens in a new tab)