Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 97 for “"Plasma Facing Components"”.

  1. Advanced materials for plasma facing components in fusion devices

    … manufacture and characterisation of thick vacuum plasma sprayed tungsten (W) coatings on steel substrates. Fusion is a potentially clean, sustainable, energy source in which nuclear energy is generated via the release of internal energy from nuclei. In order to fuse nuclei the Coulomb barrier must …

    oxford Repository record for Advanced materials for plasma facing components in fusion devices (opens in a new tab)

  2. Simulated Material Erosion from Plasma Facing Components in Tokomak Reactors

    … in the future large tokamak ITER. Electrothermal plasma sources operating in the confined controlled arc discharge regime produce heat fluxes in the range expected for hard disruptions in future large tokamaks. The radiative heat flux produced inside of the capillary discharge channel is from the …

    vt Repository record for Simulated Material Erosion from Plasma Facing Components in Tokomak Reactors (opens in a new tab)

  3. Liquid lithium loop development for open surface plasma facing components

    Submission published under a 24 month embargo labeled 'Closed Access', the embargo will last until 2026-05-01

    uiuc Repository record for Liquid lithium loop development for open surface plasma facing components (opens in a new tab)

  4. Interaction of plasmas with lithium and tungsten fusion plasma facing components

    … fusion is the interaction of the fusion plasma with the first wall of the device; an interaction which is strongest in the divertor region. Erosion, melting, sputtering, and deformation are all concerns which inform choices of divertor material. Of the many materials proposed for use in …

    uiuc Repository record for Interaction of plasmas with lithium and tungsten fusion plasma facing components (opens in a new tab)

  5. Atomistic Simulation Of Plasma Interaction With Plasma Facing Components In Fusion Reactors

    The interaction between plasma and fusion relevant materials is one of the critical issues in successfully using those materials in Tokamak reactors. This research uses molecular dynamics, kinetic Monte Carlo and binary collision approximation methods to model fusion relevant material bombarded by …

    purdue-thes Repository record for Atomistic Simulation Of Plasma Interaction With Plasma Facing Components In Fusion Reactors (opens in a new tab)

  6. Advancement of liquid lithium plasma-facing components for next-generation fusion devices

    Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2026-02-19 without embargo terms

    uiuc Repository record for Advancement of liquid lithium plasma-facing components for next-generation fusion devices (opens in a new tab)

  7. Ion-beam and Nuclear-Reaction analysis of plasma facing components in the JET tokamak

    Στην παρούσα εργασία αναλύονται δείγματα από το εκτροπέα του αναδιαμορφωμένου τοιχώματος του JET tokamak που εκτέθηκαν σε πλάσμα δευτερίου-δευτερίου. Οι τεχνικές που χρησιμοποιήθηκαν είναι RBS, NRA, XRF και SEM/EDS και σκοπό έχει να προσδιορισθούν τα στοιχεία που εναποτέθηκαν στα δείγματα και να …

    athens Repository record for Ion-beam and Nuclear-Reaction analysis of plasma facing components in the JET tokamak (opens in a new tab)

  8. Plasma Immersion Ion Implantation Studies of Tungsten and Tungsten Alloys as Plasma-Facing Components for Fusion Devices

    Plasma fusion devices require plasma-facing components (PFC’s) that can endure the harsh environment at the hot plasma’s edge. Studies of the suitability of materials for fusion PFC’s require experiments that can simulate the ion bombardment associated with fusion edge plasma’s. Currently, tungsten …

    sask Repository record for Plasma Immersion Ion Implantation Studies of Tungsten and Tungsten Alloys as Plasma-Facing Components for Fusion Devices (opens in a new tab) Embargoed until 2027-11-18

  9. Characterization of a Digital Holography Diagnostic for In Situ Erosion Measurement of Plasma-Facing Components in Fusion Devices

    … over time from the heat flux of the high-energy plasma they generate. The ability to monitor the rate of surface modification is therefore imperative, but to date no proven technique exists for real-time erosion measurement of planar regions of interest on plasma-facing components in fusion …

    utk-theses Repository record for Characterization of a Digital Holography Diagnostic for In Situ Erosion Measurement of Plasma-Facing Components in Fusion Devices (opens in a new tab)

  10. Response Of Plasma Facing Components In Tokamaks Due To Intense Energy Deposition Using Particle-In-Cell(pic) Methods

    <p>Damage to plasma-facing components (PFC) due to various plasma instabilities is still a major concern for the successful development of fusion energy and represents a significant research obstacle in the community. It is of great importance to fully understand the behavior and lifetime …

    purdue-thes Repository record for Response Of Plasma Facing Components In Tokamaks Due To Intense Energy Deposition Using Particle-In-Cell(pic) Methods (opens in a new tab)

  11. Plasma Facing Components conditioning techniques and their correlation with plasma performance in the National Spherical Torus eXperiment Upgrade (NSTX-U)

    The effect of Plasma Facing Components (PFC) conditioning with boronization on plasma performance in the National Spherical Torus eXperiment Up- grade (NSTX-U) has been investigated in this work. A novel PFC diagnostic, the Materials Analysis Particle Probe (MAPP) was commissioned in NSTX-U and was …

    uiuc Repository record for Plasma Facing Components conditioning techniques and their correlation with plasma performance in the National Spherical Torus eXperiment Upgrade (NSTX-U) (opens in a new tab)

  12. Relativistic, Continuum Drift-Kinetic Capability in the NIMROD Plasma Fluid Code

    … a serious risk in the form of severe damage to plasma facing components in ITER and future burning plasma reactors. Early RE studies used simplified geometric and transport models, but enabled feedback on the overall plasma evolution. This feedback is important for understanding the evolution of …

    utahstate Repository record for Relativistic, Continuum Drift-Kinetic Capability in the NIMROD Plasma Fluid Code (opens in a new tab)

  13. Time and spatially resolved spectroscopy during plasma etching of carbon surfaces

    … to be resolved is the anomalous fast erosion of plasma-facing components due to plasma-surface interactions. The plasma-facing components are made of carbon-¯ber composites and these are etched away during fusion-plasma exposure. The etched hydrocarbons are redeposited on the reactor walls, …

    eindhoven Repository record for Time and spatially resolved spectroscopy during plasma etching of carbon surfaces (opens in a new tab) Download PDF for Time and spatially resolved spectroscopy during plasma etching of carbon surfaces (opens in a new tab)

  14. Studies of propagating slow waves in the ion cyclotron range of frequencies

    Heating magnetically confined plasma with electromagnetic waves in the ion cyclotron range of frequencies is an established method in fusion research. However, it was observed that ICRF heating can induce sputtering at the plasma facing components. This contaminates the plasma which then leads to …

    lmu-germany Repository record for Studies of propagating slow waves in the ion cyclotron range of frequencies (opens in a new tab)

  15. Experimental and numerical investigation of the thermal performance of gas-cooled divertor modules

    Divertors are in-vessel, plasma-facing, components in magnetic-confinement fusion reactors. Their main function is to remove the fusion reaction ash (α-particles), unburned fuel, and eroded particles from the reactor, which adversely affect the quality of the plasma. A significant fraction (~15 %) …

    gatech Repository record for Experimental and numerical investigation of the thermal performance of gas-cooled divertor modules (opens in a new tab)

  16. Disruption Mitigation in Tokamaks with Shattered Pellet Injection

    … of confinement of the energy content of fusion plasmas in off-normal events, called disruptions, are among the most severe threats to the future of fusion energy based on the tokamak design. An efficient disruption mitigation system will therefore be of utmost importance for future large, …

    chalmers Repository record for Disruption Mitigation in Tokamaks with Shattered Pellet Injection (opens in a new tab)

  17. The Effect of Ion Energy and Substrate Temperature on Deuterium Trapping in Tungsten

    Tungsten is a candidate plasma facing material for next generation magnetic fusion devices such as ITER and there are major operational and safety issues associated with hydrogen (tritium) retention in plasma facing components. An ion gun was used to simulate plasmamaterial interactions under …

    toronto-retro Repository record for The Effect of Ion Energy and Substrate Temperature on Deuterium Trapping in Tungsten (opens in a new tab)

  18. A Process Optimization Framework for Direct Energy Deposition: Densification, Microstructure, and Mechanical Properties of an Iron-Chromium Alloy

    … steels are of interest for functionally graded plasma-facing components in fusion reactors. Using the framework, high-density Fe-9wt.%Cr samples were fabricated using a variety of process parameters. The mechanical properties and microstructure of as-printed Fe-9wt.%Cr are characterized using …

    tamu Repository record for A Process Optimization Framework for Direct Energy Deposition: Densification, Microstructure, and Mechanical Properties of an Iron-Chromium Alloy (opens in a new tab)

Page 1 of 5