Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 58 for “"Plasma potential"”.
-
Direct Plasma Potential and Ion Temperature Measurement in the Plasma Edge of the STOR-M Tokamak
Reliable measurements of plasma parameters in the plasma edge are essential to give insight on the plasma state and to ensure that the plasma-wall interactions are below damage thresholds. Using electrostatic probes, the ion temperature is hard to estimate due to the higher mobility of electrons …
-
Determination of Ionization Fraction and Plasma Potential in a DC Magnetron Sputtering System Using a Quartz Crystal Microbalance and a Gridded Energy Analyzer
Made available in DSpace on 2017-07-06T18:48:17Z (GMT). No. of bitstreams: 3 Green_Karyn_M_MS.pdf: 35887684 bytes, checksum: 4d8ec8bef5ab4e9e6aabee4e3ff410a5 (MD5) Green_Karyn_M_MS_ABS.pdf: 507343 bytes, checksum: 0d504c63e61c048bbb16c0ee4bce83fa (MD5) license.txt: 4813 bytes, checksum: …
-
Comparing the roles of inductive and capacitive coupling in a planar inductively coupled plasma through both theory and experiment
The inductive and capacitive excitation coil-plasma interaction in an inductively coupled plasma (ICP) is studied in this dissertation. The inductive coupling transfers power from the excitation coil to the plasma, while the parasitic capacitive coupling gives rise to rf plasma potential and DC …
-
Measurement of plasma parameters in the exhaust of a magnetoplasma rocket by gridded energy analyzer and emissive Langmuir probe
… of the Variable Specific Impulse Magnetoplasma Rocket (VASIMR) engine, abbreviated as VX-10, is designed to eject plasma at exhaust velocities of tens of kilometers per second. In this device, energy is imparted to the plasma ions by two mechanisms: ion cyclotron resonant heating (ICRH), …
-
Probes in gaseous plasmas
… the time of Langmuir measurements of the current-potential characteristic of a small electrode probe immersed in a partially ionised gas have been used for the quantitative study of plasmas. The plasma parameters of interest are electron and ion temperature, electron and ion concentration, and …
-
The electrical properties of contamination particle traps in a process plasma.
… of contamination particles suspended in process plasma have been observed by several workers. This dissertation reports on the electrical properties of such clouds (referred to as Electrostatic Particle Traps or EPT) in an argon sputter plasma using a silicon wafer placed upon a graphite …
-
Properties of Intermittent Transport in the Mega Ampere Spherical Tokamak
… on MAST to make a direct mea- surement of the plasma potential at the plasma boundary. By combining the BPP measurement with the floating potential from a Langmuir probe (LP) a measurement of the electron temperature is obtained, which is compared to the Thomson scattering diagnostic allowing …
-
Ion acceleration mechanisms of helicon thrusters
A helicon plasma source is a device that can efficiently ionize a gas to create high density, low temperature plasma. There is growing interest in utilizing a helicon plasma source in propulsive applications, but it is not yet known if the helicon plasma source is able to function as both an ion …
-
Diagnostics and modelling of an inductively coupled RF low-pressure low-temperature plasma
… ) inductively coupled plasma. This type of plasma is similar to those much used in plasma etching, deposition, and other plasma aided materials processing of devices [I-5]. A two-dimensional, electromagnetic, finite-element model has been set up to simulate the operation …
-
Development of an uncompensated diagnostic for the measurement of phase-resolved characteristics in radio-frequency plasmas
In recent years, plasma technology has found its way into a wide and diveme array of manufacturing techniques and facilities, ranging from biomedical applications to microprocessor fabrication. In all cases, greater overall efficiency and usefulness can be improved by understanding the fundamentals …
-
Hollow Cathode Plasma Plume Characterisation for Low-Power AF-MPD Thruster Applications
… fields, incorporating a suite of custom-built plasma diagnostic probes. The experimental study began with general discharge characterisation, including ignition behaviour, voltage–current trends, and visual plume observations for different anode configurations and field strengths. These results …
-
Modifications of radiofrequency capacitive discharge for deposition of carbon coatings
… with a hollow cathode powered electrode. Plasma characterization was conducted by means of an electrostatic probe and an energy and mass analysis probe. Interpretation of the electrostatic probe data in presence of RF harmonics in plasma has been discussed. <br></br>Electron injection and …
-
INVESTIGATION OF LOSS MECHANISMS IN A PERMANENT MAGNET ELECTRODELESS RADIO FREQUENCY PLASMA THRUSTER
… are high-efficiency and flexible propellantplasma generation devices with potential for both station-keeping and deep-space missions. In this dissertation, a low-power RF electrodeless thruster was designed and tested in a vacuum chamber using a flush-mounted wall probe, emissive probe, and …
-
Development Of A Low Pressure-inductively Coupled Plasma-ion Source For Mass Spectrometry
A low pressure-inductively coupled plasma (LP-ICP) ion source has been investigated for the production of atomic and molecular ions for mass spectrometry (MS). A dedicated LPICP- MS was constructed, by modifying a Hewlett Packard mass selective detector, to detect ions from the LP-ICP. The ion …
-
Development of an inductively coupled impulse sputtering source for coating deposition.
In recent years, highly ionised pulsed plasma processes have had a great impact on improving the coating performance of various applications, such as for cutting tools and ITO coatings, allowing for a longer service life and improved defect densities. These improvements stem from the higher …
-
Computer-aided reduction of plasma data
… characteristics of the data obtained by most plasma diagnostic equipment makes computer-aided data handling a desirable feature in plasma laboratories. The Lecroy 3500-SA32 signal analyzer is used as the data handling system in this work. The performance of the Lecroy 3500-SA32 signal …
-
The particle trap and plasma parameter studies in an RF argon discharge
Low pressure plasma discharges have been an important process in the manufacturing of microelectronics devices since the late seventies. Therefore, the knowledge and control of the physical and chemical phenomena in plasmas are important for reactor design and process development. In order to …
-
Helicon Wave Propagation in Low Diverging Magnetic Fields.
… at 13.56 MHz), is used to create both the plasma and launch helicon waves, while the diverging magnetic field is produced by a number of solenoids that surround both the antenna and source tube. Experiments are conducted with argon gas in the pressure range 0.04-0.4 Pa, and for rf input …
-
Factors affecting the plasma ion implantation of metallic samples
<p>The UTK Plasma Science Laboratory has been engaged in a research program, under the sponsorship of the Army Research Office and the UTK Center for Materials Processing, to assess the effects of plasma ion implanted species on the corrosion resistance of common engineering materials. The UTK …
-
Spatial diagnostics of plasma produced by a VHF multi-tile electrode
A scalable multi-tile electrode plasma source operating at 150MHz and 162MHz is described. An investigation into the spatial structure of plasmas produced in such as source is reported. Four dierent plasma diagnostics are applied to examine this spatial structure; they are time-varying magnetic ux …
Page 1 of 3