Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"Plasma spray process"”.
-
Fabrication of Ceramic Filtration Membrane Using Suspension Plasma Spray Process
Suspension plasma spraying (SPS) is an emerging versatile and scalable coating technology for deposition of sub-micron sized particles on different substrates to generate coatings with fine microstructures and high mechanical and physical properties. This work, was the first attempt to fabricate …
-
Development of a Plasma Spray Process Monitoring System through Aeroacoustic Signal Analysis
Plasma spray coatings are vital to the capabilities of jet engines. They allow engines to operate at combustion temperatures that would otherwise melt the superalloy components. Coatings tighten clearance between rotating components, increasing engine compression. They prevent chemical attack and …
-
Three-Dimensional Simulation of Coating Build-up In Suspension Plasma Spray Process
Thermal spray technology is widely used in many industries. The most important purposes of applying coatings are improving functional performance by the ability to work at higher temperature, increasing component life by protecting the surface against degradation, and repairing worn parts without …
-
Optimal Parameters for Doubly Curved Sandwich Shells, Composite Laminates, and Atmospheric Plasma Spray Process
Optimization is a decision making process to solve problems in a number of fields including engineering mechanics. Bio-inspired optimization algorithms, including genetic algorithm (GA), have been studied for many years. There is a large literature on applying the GA to mechanics problems. However, …
-
Adaptive Process Control for Achieving Consistent Mean Particles' States in Atmospheric Plasma Spray Process
The coatings produced by an atmospheric plasma spray process (APSP) must be of uniform quality. However, the complexity of the process and the random introduction of noise variables such as fluctuations in the powder injection rate and the arc voltage make it difficult to control the coating …
-
Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Process under Atmospheric and Low-pressure Conditions
… were fabricated via the solution precursor plasma spray process under atmospheric and low-pressure conditions. Firstly, Yb2O3 coatings were deposited via the solution precursor atmospheric plasma spray (SPAPS) process by an injection of Yb(NO3)3 solution into atmospheric plasma. The SPAPS …
-
Suspension plasma sprayed alumina-yttria stabilized zirconia nano-composite thermal barrier coatings : formation and roles of the amorphous phase
… barrier coatings are mostly produced by thermal spray techniques, especially plasma spray processes. They are widely used in the aerospace and automotive industries and in power plants, applications in which there is an ever-increasing demand for further improvement of functionality and …
-
Development of a fluid model for DC arc plasma torches and its integration with downstream models of atmospheric plasma spray particle plumes
The plasma spray process uses plasma flames to melt micron sized particles of e.g. ceramic and propel the droplets to impinge upon and freeze to the target workpiece, forming a functional coating. Variations in the process arise from many sources, and because sensing of the process is imperfect one …
-
Breakup of Liquid Feedstock in Plasma Spraying
Suspension plasma spray is an emerging technology to produce functional nanostructured coatings at moderate cost. In general, in this technique, the liquid is injected radially into a high-velocity high-temperature plasma flow. After liquid breakup and evaporation, solid particles remain in the …
-
Thin film sensor techniques for the instrumentation of ceramic/metal interfaces in next generation aero gas turbines
… The aggressive nature of the application process of the TBC haspreviously made the measurement of metal surface temperature and strainexceedingly difficult on components to which it is applied.In the present study magnetron sputter-deposited thin film sensor techniques havebeen developed …
-
Drying of a Single Suspension Droplet in Suspension Plasma Spray: Numerical and Experimental Study
Suspension plasma spray is a powerful coating technique for depositing high-quality thermal barrier coatings with promising mechanical and physical properties while taking advantage of the well-established atmospheric plasma spray process. In this process, fine ceramic particles are suspended in …
-
Study of microstructure effect on the thermal properties of Yttria-stabilized-Zirconia thermal barrier coatings made by atmospheric plasma spray and pressing machine
… set of samples was fabricated by Atmospheric Plasma Spray process for two different microstructure configurations, standard (STD) and vertically cracked (VC), and two different thicknesses, 400 and 700 micron respectively. A laser flash system was used to measure the thermal properties of the …
-
Synergistic Modeling of Advanced Manufacturing Processes with Functional Variables
… functional variables can represent the in situ process conditions and rich product performance information, and are widely encountered in various manufacturing processes. In this dissertation, I will focus on modeling of manufacturing processes with in situ process (functional) variables, and …
-
Air plasma spraying of copper-based SOFC anodes for direct oxidation of hydrocarbon fuels
… investigates the utilization of atmospheric plasma spraying (APS) utilizing a DC axial injection torch to produce porous composite SOFC anodes for direct oxidation of hydrocarbon fuels based on samaria doped ceria (SDC) or gadolinia doped ceria (GDC) and Cu or Cu-Co. Currently, these anodes …
-
Development and Characterization of Nickel and Yttria-stabilized Zirconia Anodes for Metal-Supported Solid Oxide Fuel Cells Fabricated by Atmospheric Plasma Spraying
… zirconia (YSZ) coatings and the processing parameters used for their deposition by atmospheric plasma spraying (APS). Research was also performed on the development of relationships between the microstructure of plasma sprayed Ni-YSZ coatings and the electrochemical performance of …
-
Development of Plasma Sprayed Composite Cathodes for Solid Oxide Fuel Cells
Atmospheric plasma spraying is attractive for manufacturing solid oxide fuel cells (SOFCs) because it allows functional layers to be built rapidly with controlled microstructures. The technique allows SOFCs that operate at low temperatures (600 to 750°C) to be fabricated by spraying directly onto …
-
Microstructural Characterisation of Splat-Substrate Interface Interaction in Thermal Spray Coatings by Various Microscopy Techniques
Thermal spray describes a broad family of coating techniques, which is used for surfacing and resurfacing of engineering components without compromising the substrate’s material properties. In thermal spray, the coating particles impact the substrate surface either in the molten or semi-molten …
-
Microstructures and oxidation properties in hafnium-tantalum-nitride ceramics
… sets of hafnium nitride diffusion couples were processed by hot-isostatic pressing and their resulting microstructure and phase orientation were identified. Distinct regions were found in the diffusion couples. It was shown that the rhombohedral ζ-Hf_4 N_3 phase, like other M_4 X_3 UHTCs, formed …
-
Numerical Modeling of Suspension and Particle Transport in Thermal Spray Processes
… superior thermal insulation. Suspension thermal sprays have been shown to be viable techniques in generating this kind of coatings. In these techniques, suspension which is a combination of a base liquid and fine solid particles is injected into a high-temperature high-velocity jets. After …