Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 108 for “"Plasma spraying"”.
-
Modeling of Suspension Plasma Spraying
Plasma Spraying is a coating process designed to deposit accelerated molten or semi-molten coating materials on prepared substrates. Suspension Plasma Spraying (SPS) is one type of Plasma Spraying with enhanced characteristics. Numerical modeling of this process helps us to find optimum operating …
-
Air plasma spraying of SOFC composite cathodes
Air plasma spraying (APS) has been used to produce porous composite cathodes containing (La0.8Sr0.2)0.98Mn(LSM) and yttria stabilized zirconia (YSZ) for use in solid oxide fuel cells (SOFCs). Preliminary investigations focused on determining the range of plasma conditions under which each of the …
-
Numerical Modeling of Suspension Plasma Spraying Process
Suspension plasma spraying (SPS), a relatively new deposition technique in thermal spray coating technology, has been increasingly applied to deposit high-quality thermal barrier coatings using sub-micron particles. An accurate simulation of the process includes developing a realistic plasma model …
-
Photoactive TiO2 coatings by suspension plasma spraying
… with industrial production. Suspension plasma spray (SPS) deposition could be used to obtain TiO2 deposits with an effective photoactive performance to decompose organic compounds and antiviral applications. Furthermore, TiO2 coatings with various degrees of sub-stoichiometric oxidation …
-
Breakup of Liquid Feedstock in Plasma Spraying
Suspension plasma spray is an emerging technology to produce functional nanostructured coatings at moderate cost. In general, in this technique, the liquid is injected radially into a high-velocity high-temperature plasma flow. After liquid breakup and evaporation, solid particles remain in the …
-
Aluminum-silicon carbide composite coatings by plasma spraying
… of the same. This has led to the development of plasma sprayable surface coatings for the components. To impart the maximum bonding strength, along with hardness to the coatings an aluminum based composite (Al-SiC) was found to be the most suitable. The presence of a hard ceramic second phase …
-
Plasma spraying of aluminum-based glass forming alloys
… on aluminum alloy plates using an atmospheric plasma spray (APS) technique to form the corrosion resistant barrier coating. The corrosion resistance of APS coatings tested in a neutral salt-fog chamber showed that the coating performance was dependent on the crystallinity, coating permeability …
-
Plasma spraying low thermal expansion alumino-silicate glasses
… 8.3 and 10.1 weight percent TiO<sub>2</sub> were plasma sprayed onto SiO<sub>2</sub>-based refractory concrete substrates. Substrate temperatures were controlled such that the maximum surface temperature exceeded the crystallization temperature during plasma spraying. The surprising aspect of this …
-
Effects of surface chemistry on splat formation during plasma spraying
Plasma spray technology has been widely employed for deposition of engineering coatings. Coatings produced with customizable surface properties are used for a variety of industrial applications. The coatings are formed as molten coating particles impact and spread out to form overlapping splats. …
-
Flash Boiling Atomization of Suspension for Application of Suspension Plasma Spraying
Suspension Plasma Spraying (SPS) is a thermal spray technique used to deposit sub-micron and nano-sized particles. The liquid is evaporated by exposing the suspension to the plasma jet. Then, the particles are melted and directed in the plasma jet to impact the substrate and form a coating. SPS has …
-
Three-Dimensional Modeling of Arc Voltage Fluctuations in Suspension Plasma Spraying
Considering the wide range of plasma jet applications including plasma cutting, plasma spraying, and plasma arc waste disposal, realistic simulation of a plasma jet would significantly help to better understand and improve various processes. In this research, firstly a three-dimensional DC plasma …
-
Tailoring the Microstructure of Photoactive Ceramic Membranes Deposited by Suspension Plasma Spraying
… approach is the utilization of suspension plasma spray (SPS), a relatively new coating deposition technology that involves sub-micron to nano-sized feedstock materials. This single-step process holds the potential to offer a cost-effective solution for producing ceramic membranes. …
-
Laser Remelting of Yttria Stabilized Zirconia Coatings Deposited by Suspension Plasma Spraying
… Zirconia Coatings Deposited by Suspension Plasma Spraying ASHKAN BAADI CONCORDIA UNIVERSITY, 2020 Thermal barrier coatings (TBCs) are applied as a protective layer in a range of applications, mainly in the aero-engine and power generation industries to protect the metallic parts from high …
-
Effect of Substrate on In-flight Particle Characteristics in Suspension Plasma Spraying
… in which surfaces of materials are coated by spraying a wide range of metals or ceramics. Considering the growing interest in building nanostructured coatings due to their significant characteristics a new technique called suspension plasma spraying is developed. In this method, a coating is …
-
Aqueous suspension plasma spraying of yttria stabilized zirconia solid oxide fuel cell electrolytes
… materials sets and increase production times. Plasma spraying (PS) is a potential next generation SOFC fabrication process that can rapidly produce fully sintered ceramic layers without the need for post deposition heat treatments; however, it is difficult to produce the thin, fully dense …
-
Investigation into the thermal dehydroxylation and decomposition of hydroxylapatite during atmospheric plasma spraying
… implants and for utilisation as a drug carrier. Plasma spraying is widely used to coat hydroxylapatite onto titanium alloys in hip endoprostheses. However, the high temperature of the plasma jet changes the crystallinity and decomposes hydroxylapatite. This affects in turn its bioconductivity. In …
-
Air plasma spraying of copper-based SOFC anodes for direct oxidation of hydrocarbon fuels
… investigates the utilization of atmospheric plasma spraying (APS) utilizing a DC axial injection torch to produce porous composite SOFC anodes for direct oxidation of hydrocarbon fuels based on samaria doped ceria (SDC) or gadolinia doped ceria (GDC) and Cu or Cu-Co. Currently, these anodes …
-
Performance and reliability studies of Atmospheric Plasma Spraying Raney nickel electrodes for alkaline electrolysers
… main aim was the examination of the Atmospheric Plasma Spraying Raney nickel electrodes samples with strong emphasis on electrochemical characterisation and investigation of the degradation/deactivation mechanisms which occur within the electrodes structure. Nowadays research in alkaline …
Page 1 of 6