Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Plasma-facing materials"”.
-
Investigation of plasma facing materials at JET Tokamak
… understanding of the interaction between plasma and plasma-facing materials constitutes a critical issue for the safe operation of fusion devices and the prediction of the life time of the inner wall of fusion machines. The most important mechanisms that are caused by the plasma-material …
-
Fuel retention in plasma facing materials of the JET ITER-like wall
… The techniques applied to these novel inservice materials were: Scanning Electron Microscopy with Energy Dispersive X-Ray (SEM-EDX), Raman Spectroscopy; Focused Ion Beam (FIB) 3D milling; Scanning Transmission Electron Microscopy (STEM) with Electron Energy Loss Spectroscopy (EELS) and Energy …
-
In-Situ Measurement of Dynamic Deuterium Retention in Tungsten-Based Alloys Under Plasma Exposure
… energy production, but the performance of plasma-facing materials remains a key challenge for reactor operation. In particular, hydrogen isotope retention in tungsten—the leading candidate material for divertor components—affects tritium inventory, fuel recycling, and overall material …
-
Helium Effects in High Entropy Alloys for Fusion Reactor Plasma Facing Components
The plasma facing materials (PFMs) within fusion reactors, such as the divertor, must be able to withstand high temperature (>1000 K) for extended durations of time, in addition to extreme flux from neutrons, helium (He) ash, and neutral species such as deuterium and tritium. These materials must …
-
Development of Novel Low Activation Refractory High Entropy Alloys for Nuclear Fusion Applications
… design concerns need to be addressed. Suitable materials for the first wall of the reactor need to be able to withstand harsh conditions including: extreme heat loads (0.25-0.5 MWm-2), significant transient heat fluxes between 10-20 MWm-2, and high energy neutron bombardments (14 MeV). A novel …
-
Insulating Materials for an Extreme Environment in a Supersonically Rotating Fusion Plasma
… remaining challenges in fusion is that of plasma-facing materials, even denoted by the National Academies of Science. The materials challenge is particularly acute for centrifugal mirrors, an alternative concept to the industry-standard tokamak that may offer a more efficient scheme with a …
-
Simulated Material Erosion from Plasma Facing Components in Tokomak Reactors
… in the future large tokamak ITER. Electrothermal plasma sources operating in the confined controlled arc discharge regime produce heat fluxes in the range expected for hard disruptions in future large tokamaks. The radiative heat flux produced inside of the capillary discharge channel is from the …
-
Heat transfer analysis of thermoelectric driven swirling flow
… heat from the divertor region. The solid plasma facing materials (PFM) suffer from the sputtering and thermal stress. An alternative way is to utilize liquid metal especially the liquid lithium as the divertor material. An experiment on CDX-U found that a shallow pool of liquid lithium …
-
Thermo-oxidation of undoped and W-doped carbon co-deposited films: a study of erosion behaviour and reaction product formation
… against undoped specimens. Three cycles of plasma deposition and thermo-oxidation take place, to determine any trends over time and with the varying W-content. Finally, the reaction products are observed and compared between the oxidation of a batch of undoped films and W-doped films. For …
-
Study of temperature dependence of hydrogen retention in lithium coatings on stainless steel with the Materials Analysis Particle Probe (MAPP)
Plasma materials interactions (PMI) in tokamak machines play a crucial role in the overall plasma performance. For this reason PMI research has gained great interest during the last couple of decades. Proper conditioning of Plasma Facing Components (PFCs) has shown to have dramatic effects in …
-
F-TRIDYN: A Monte-Carlo, BCA code for modeling ion-surface interactions with rough materials and coupling plasma and material codes
… and additional output modes for coupling to plasma edge and material codes. Surface roughness plays an important role in ion irradiation processes such as sputtering; roughness can significantly increase the angle of maximum sputtering and strongly affect the sputtering yield. The complete …
-
Damage Studies of Tungsten Samples Using Dense Plasma Focus Devices
Design and studies of plasma facing material for a fusion reactor is an engineering challenge. The focus of this M.Sc. thesis research project studies the interaction between the helium (He) ion beam produced in a dense plasma focus (DPF) device and the tungsten samples (poly-W and nano-W). …
-
Radiative divertor studies in JET high confinement mode plasmas
… maintain heat loads less than 10 MW/m2 at the plasma-facing materials (PFM), while producing gigawatts of fusion power. Furthermore, sufficiently low erosion of and fuel retention in PFMs are required to reach reactor relevant component duty cycles. The presently preferred solution to these …
-
Study of the annealing effects on the mechanical and structural properties of neutron irradiated tungsten materials with applications in fusion technology
… particles during the operation of a magnetic plasma confinement device (Tokamak) necessitate the use of materials that are resistant to high temperatures, high heat loads and radiation. Tungsten (W) and tungsten based materials are candidate materials for the interior walls of a fusion reactor …
-
Erosion, deposition and material migration in the JET divertor with carbon and ITER-like walls
… coils known as tokamaks are used to contain the plasma of hydrogen fuel. The fuel ions can erode the plasma-facing materials, leading to degradation of plasma performance, limitation of vessel lifetimes and fuel retention. Plasma-material interaction is particularly significant in the divertor …
-
Numerical simulation of water-cooled sample holders for high-heat flux testing of low-level irradiated materials
… for ITER is the development of adequate plasma facing materials (PFMs) that can withstand the strenuous conditions of operation. To date, high heat flux (HHF) testing has been conducted mainly on non-irradiated specimens due to the difficulty of working with radioactive specimens, such as …
-
A Novel Transition Layer Structure for Integrating Tungsten and Reduced Activation Ferritic/ Martensitic Steel
… yet to be found for the transition between the plasma facing components (PFCs) and structural materials of fusion reactors. A well-considered design is necessary for the joining of plasma facing component such as tungsten and structural components such as reduced activation ferritic martensitic …
-
Thermal-hydraulic performance evaluation and optimization of the T-tube divertor design using numerical simulations
… technology issue in magnetic fusion energy is plasma-materials interactions (PMI). Because our understanding of how materials change when exposed to burning plasmas over extended periods is limited, Oak Ridge National Laboratory (ORNL) has proposed a linear plasma simulator, the Material-Plasma …
-
Simulazioni multiscala dell'invecchiamento dei materiali esposti al plasma in ambienti di fusione nucleare
I Plasma Facing Materials (PFM) sono materiali progettati per stare a diretto contatto con il plasma. L'evoluzione temporale delle loro caratteristiche fisiche è di profondo interesse per diversi ambiti scientifici, in particolare per quello della fusione nucleare con lo scopo di controllarne i …
Page 1 of 2